SU-FF-T-48: A Study of the Impact of X-Ray Energy and Angular Distributions Produced From 6- and 18-MV Medical Linear Accelerators On Non-Target Exposures

2007 ◽  
Vol 34 (6Part8) ◽  
pp. 2411-2411
Author(s):  
J Hanlon ◽  
B Bednarz ◽  
X Xu
Keyword(s):  
Angular Distributions ◽  
Linear Accelerators ◽  
X Ray ◽  
Medical Linear Accelerators ◽  
Energy And Angular Distributions ◽  
The Impact

scholarly journals Synchrotron X-ray induced acoustic imaging

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Seongwook Choi ◽  
Eun-Yeong Park ◽  
Sinyoung Park ◽  
Jong Hyun Kim ◽  
Chulhong Kim
Keyword(s):  
Acoustic Imaging ◽  
Signal Frequency ◽  
X Rays ◽  
Repetition Period ◽  
Linear Accelerators ◽  
X Ray ◽  
X Ray Computed ◽  
Medical Linear Accelerators ◽  
Ionizing Radiation Exposure ◽  
X Ray Absorption

AbstractX-ray induced acoustic imaging (XAI) is an emerging biomedical imaging technique that can visualize X-ray absorption contrast at ultrasound resolution with less ionizing radiation exposure than conventional X-ray computed tomography. So far, medical linear accelerators or industrial portable X-ray tubes have been explored as X-ray excitation sources for XAI. Here, we demonstrate the first feasible synchrotron XAI (sXAI). The synchrotron generates X-rays, with a dominant energy of 4 to 30 keV, a pulse-width of 30 ps, a pulse-repetition period of 2 ns, and a bunch-repetition period of 940 ns. The X-ray induced acoustic (XA) signals are processed in the Fourier domain by matching the signal frequency with the bunch-repetition frequency. We successfully obtained two-dimensional XA images of various lead targets. This novel sXAI tool could complement conventional synchrotron applications.

X-ray sources of medical linear accelerators: Focal and extra-focal radiation

1993 ◽  
Vol 20 (5) ◽  
pp. 1417-1427 ◽  
Author(s):  
D. A. Jaffray ◽  
J. J. Battista ◽  
A. Fenster ◽  
P. Munro
Keyword(s):  
Linear Accelerators ◽  
X Ray ◽  
Medical Linear Accelerators

Radiotherapy: external beam radiotherapy

2015 ◽  
Author(s):  
Deborah J Peet ◽  
Patrick Horton ◽  
Colin J Martin ◽  
David G Sutton
Keyword(s):  
External Beam Radiotherapy ◽  
Good Practice ◽  
Clinical Practices ◽  
Linear Accelerators ◽  
X Ray ◽  
Engineering Controls ◽  
Radiation Fields ◽  
Flattening Filter Free ◽  
Provision Of Services ◽  
The Impact

Design principles for radiotherapy facilities using X-ray, γ‎-ray, and electron beams are described, especially the requirements for primary and secondary shielding and maze and door entrances. These features are illustrated with reference to the shielded rooms (bunkers) required for linear accelerators, and example calculations are included for shielding and maze design to achieve required dose constraints. The impact of new clinical practices with intensity modulated radiation fields and flattening filter-free operation is also considered. Engineering controls and features for safe operation are described, and good practice in bunker construction and the provision of services to avoid weaknesses in the shielding is outlined. The principle shielding requirements for TomoTherapyTM, CyberKnifeTM, Gamma KnifeTM units, and kilovoltage X-ray units are also described. Finally, personnel monitoring, commissioning surveys, and environmental monitoring in radiation protection management in radiotherapy are discussed. Data for calculating shielding thickness and X-ray scatter for maze design are provided.

Analyzing the Impact of X-Ray Tomography on the Reliability of Integrated Circuits

2015 ◽  
Author(s):  
Halit Dogan ◽  
Md Mahbub Alam ◽  
Navid Asadizanjani ◽  
Sina Shahbazmohamadi ◽  
Domenic Forte ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
3D Imaging ◽  
Three Dimensional ◽  
Serial Sectioning ◽  
Promising Technique ◽  
Flash Memories ◽  
X Ray ◽  
3D Information ◽  
The Impact

Abstract X-ray tomography is a promising technique that can provide micron level, internal structure, and three dimensional (3D) information of an integrated circuit (IC) component without the need for serial sectioning or decapsulation. This is especially useful for counterfeit IC detection as demonstrated by recent work. Although the components remain physically intact during tomography, the effect of radiation on the electrical functionality is not yet fully investigated. In this paper we analyze the impact of X-ray tomography on the reliability of ICs with different fabrication technologies. We perform a 3D imaging using an advanced X-ray machine on Intel flash memories, Macronix flash memories, Xilinx Spartan 3 and Spartan 6 FPGAs. Electrical functionalities are then tested in a systematic procedure after each round of tomography to estimate the impact of X-ray on Flash erase time, read margin, and program operation, and the frequencies of ring oscillators in the FPGAs. A major finding is that erase times for flash memories of older technology are significantly degraded when exposed to tomography, eventually resulting in failure. However, the flash and Xilinx FPGAs of newer technologies seem less sensitive to tomography, as only minor degradations are observed. Further, we did not identify permanent failures for any chips in the time needed to perform tomography for counterfeit detection (approximately 2 hours).

scholarly journals The role of point-of-care ultrasound in the diagnosis of pericardial effusion: a single academic center retrospective study

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Matthew G. Hanson ◽  
Barry Chan
Keyword(s):  
Pericardial Effusion ◽  
Point Of Care ◽  
Physical Exam ◽  
Right Atrial ◽  
Point Of Care Ultrasound ◽  
X Ray ◽  
Average Systolic Blood Pressure ◽  
Time To Diagnosis ◽  
Clinically Significant ◽  
The Impact

Abstract Background Symptomatic pericardial effusion (PCE) presents with non-specific features and are often missed on the initial physical exam, chest X-ray (CXR), and electrocardiogram (ECG). In extreme cases, misdiagnosis can evolve into decompensated cardiac tamponade, a life-threatening obstructive shock. The purpose of this study is to evaluate the impact of point-of-care ultrasound (POCUS) on the diagnosis and therapeutic intervention of clinically significant PCE. Methods In a retrospective chart review, we looked at all patients between 2002 and 2018 at a major Canadian academic hospital who had a pericardiocentesis for clinically significant PCE. We extracted the rate of presenting complaints, physical exam findings, X-ray findings, ECG findings, time-to-diagnosis, and time-to-pericardiocentesis and how these were impacted by POCUS. Results The most common presenting symptom was dyspnea (64%) and the average systolic blood pressure (SBP) was 120 mmHg. 86% of people presenting had an effusion > 1 cm, and 89% were circumferential on departmental echocardiogram (ECHO) with 64% having evidence of right atrial systolic collapse and 58% with early diastolic right ventricular collapse. The average time-to-diagnosis with POCUS was 5.9 h compared to > 12 h with other imaging including departmental ECHO. Those who had the PCE identified by POCUS had an average time-to-pericardiocentesis of 28.1 h compared to > 48 h with other diagnostic modalities. Conclusion POCUS expedites the diagnosis of symptomatic PCE given its non-specific clinical findings which, in turn, may accelerate the time-to-intervention.

scholarly journals X-ray Shielding, Mechanical, Physical, and Water Absorption Properties of Wood/PVC Composites Containing Bismuth Oxide

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2212
Author(s):  
Worawat Poltabtim ◽  
Ekachai Wimolmala ◽  
Teerasak Markpin ◽  
Narongrit Sombatsompop ◽  
Vichai Rosarpitak ◽  
...  
Keyword(s):  
Impact Strength ◽  
Water Absorption ◽  
Attenuation Coefficient ◽  
Bismuth Oxide ◽  
Morphological Properties ◽  
Linear Attenuation Coefficient ◽  
X Rays ◽  
Equivalent Thickness ◽  
X Ray ◽  
The Impact

The potential utilization of wood/polyvinyl chloride (WPVC) composites containing an X-ray protective filler, namely bismuth oxide (Bi2O3) particles, was investigated as novel, safe, and environmentally friendly X-ray shielding materials. The wood and Bi2O3 contents used in this work varied from 20 to 40 parts per hundred parts of PVC by weight (pph) and from 0 to 25, 50, 75, and 100 pph, respectively. The study considered X-ray shielding, mechanical, density, water absorption, and morphological properties. The results showed that the overall X-ray shielding parameters, namely the linear attenuation coefficient (µ), mass attenuation coefficient (µm), and lead equivalent thickness (Pbeq), of the WPVC composites increased with increasing Bi2O3 contents but slightly decreased at higher wood contents (40 pph). Furthermore, comparative Pbeq values between the wood/PVC composites and similar commercial X-ray shielding boards indicated that the recommended Bi2O3 contents for the 20 pph (40 ph) wood/PVC composites were 35, 85, and 40 pph (40, 100, and 45 pph) for the attenuation of 60, 100, and 150-kV X-rays, respectively. In addition, the increased Bi2O3 contents in the WPVC composites enhanced the Izod impact strength, hardness (Shore D), and density, but reduced water absorption. On the other hand, the increased wood contents increased the impact strength, hardness (Shore D), and water absorption but lowered the density of the composites. The overall results suggested that the developed WPVC composites had great potential to be used as effective X-ray shielding materials with Bi2O3 acting as a suitable X-ray protective filler.

Sign in / Sign up

Export Citation Format

Share Document