In situ probing thickness dependence of the field effect mobility of naphthalenetetracarboxylic diimide-based field effect transistors

2010 ◽  
Author(s):  
Shun-Wei Liu ◽  
Chih-Chien Lee ◽  
Hung-Lin Tai ◽  
Je-Min Wen ◽  
Chin-Ti Chen
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Thickness Dependence ◽  
Field Effect Mobility

Low Temperature Device Processing Technology for II-VI Semiconductors

1989 ◽  
Vol 161 ◽  
Author(s):  
D.L. Dreifus ◽  
R.M. Kolbas ◽  
B.P. Sneed ◽  
J.F. Schetzina
Keyword(s):  
Low Temperature ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Epitaxial Layers ◽  
Processing Technologies ◽  
Device Processing ◽  
Device Structures ◽  
Lift Off ◽  
Processing Steps

ABSTRACTLow temperature (<60° C) processing technologies that avoid potentially damaging processing steps have been developed for devices fabricated from II-VI semiconductor epitaxial layers grown by photoassisted molecular beam epitaxy (MBE). These low temperature technologies include: 1) photolithography (1 µm geometries), 2) calibrated etchants (rates as low as 30 Å/s), 3) a metallization lift-off process employing a photoresist profiler, 4) an interlevel metal dielectric, and 5) an insulator technology for metal-insulator-semiconductor (MIS) structures. A number of first demonstration devices including field-effect transistors and p-n junctions have been fabricated from II-VI epitaxial layers grown by photoassisted MBE and processed using the technology described here. In this paper, two advanced device structures, processed at <60° C, will be presented: 1) CdTe:As-CdTe:In p-n junction detectors, grown in situ by photoassisted MBE, and 2) HgCdTe-HgTe-CdZnTe quantum-well modulation-doped field-effect transistors (MODFETs).

High-Mobility SiC MOSFETs with Alkaline Earth Interface Passivation

2016 ◽  
Vol 858 ◽  
pp. 671-676 ◽  
Author(s):  
Daniel J. Lichtenwalner ◽  
Vipindas Pala ◽  
Brett A. Hull ◽  
Scott Allen ◽  
John W. Palmour
Keyword(s):  
Nitric Oxide ◽  
Field Effect ◽  
Alkaline Earth ◽  
Phonon Scattering ◽  
Breakdown Strength ◽  
Field Effect Transistors ◽  
Oxide Semiconductor ◽  
Field Effect Mobility ◽  
Channel Mobility ◽  
Alkaline Earth Elements

Alkaline earth elements Sr and Ba provide SiO2/SiC interface conditions suitable for obtaining high channel mobility metal-oxide-semiconductor field-effect-transistors (MOSFETs) on the Si-face (0001) of 4H-SiC, without the standard nitric oxide (NO) anneal. The alkaline earth elements Sr and Ba located at/near the SiO2/SiC interface result in field-effect mobility (μFE) values as high as 65 and 110 cm2/V.s, respectively, on 5×1015 cm-3 Al-doped p-type SiC. As the SiC doping increases, peak mobility decreases as expected, but the peak mobility remains higher for Ba interface layer (Ba IL) devices compared to NO annealed devices. The Ba IL MOSFET field-effect mobility decreases as the temperature is increased to 150 °C, as expected when mobility is phonon-scattering-limited, not interface-trap-limited. This is in agreement with measurements of the interface state density (DIT) using the high-low C-V technique, indicating that the Ba IL results in lower DIT than that of samples with nitric oxide passivation. Vertical power MOSFET (DMOSFET) devices (1200V, 15A) fabricated with the Ba IL have a 15% lower on-resistance compared to devices with NO passivation. The DMOSFET devices with a Ba IL maintain a stable threshold voltage under NBTI stress conditions of-15V gate bias stress, at 150 °C for 100hrs, indicating no mobile ions. Secondary-ion mass-spectrometry (SIMS) analysis confirms that the Sr and Ba remain predominantly at the SiO2/SiC interface, even after high temperature oxide annealing, consistent with the observed high channel mobility after these anneals. The alkaline earth elements result in enhanced SiC oxidation rate, and the resulting gate oxide breakdown strength is slightly reduced compared to NO annealed thermal oxides on SiC.

Sign in / Sign up

Export Citation Format

Share Document