The current design of Lapan's IR camera module (Conference Presentation)

2018 ◽  
Author(s):  
Bustanul Arifin ◽  
Irwan Priyanto ◽  
Andi Mukhtar Tahir
Keyword(s):  
Ir Camera ◽  
Camera Module ◽  
Current Design

Thermal Imaging Product Power-up: Metrology for Capturing Thermal Defects on Live Units Not Visible on Any Other Technique

2005 ◽  
Author(s):  
Nova T. Zamora ◽  
Kam Meng Chong ◽  
Ashish Gupta
Keyword(s):  
Thermal Imaging ◽  
Thermal Response ◽  
Recent Application ◽  
Ir Camera ◽  
Thermal Failure ◽  
Response Data ◽  
Startup Process ◽  
Customer Returns ◽  
Actual Computer ◽  
Detection Of Defects

Abstract This paper presented the recent application of die powerup in Thermal Imaging as applied to the detection of defects causing thermal failure on revenue products or units not being captured using other available techniques. Simulating the condition on an actual computer setup, the infrared (IR) camera should capture images simultaneously as the entire bootup process is being executed by the processor, thus revealing a series of images and thermal information on each and every step of the startup process. This metrology gives the failure analyst a better approach to acquire a set of information that substantiate in the conduct of rootcause analysis of thermal-related failure in revenue units, especially on customer returns. Defective units were intentionally engineered in order to collect the thermal response data and eventually come up with a plot of all known thermal-related defects.

Evaluation of Package Defects by Thermal Imaging Techniques

2002 ◽  
Author(s):  
Yongmei Liu ◽  
Rajen Dias
Keyword(s):  
Infrared Thermography ◽  
Thermal Imaging ◽  
High Speed ◽  
Imaging Techniques ◽  
Thermal Response ◽  
Analysis Tool ◽  
Nondestructive Analysis ◽  
Ir Camera ◽  
External Heating

Abstract Study presented here has shown that Infrared thermography has the potential to be a nondestructive analysis tool for evaluating package sublayer defects. Thermal imaging is achieved by applying pulsed external heating to the package surface and monitoring the surface thermal response as a function of time with a high-speed IR camera. Since the thermal response of the surface is affected by the defects such as voids and delamination below the package surface, the technique can be used to assist package defects detection and analysis.

Fault Localization and Functional Testing of ICs by Lock-in Thermography

2002 ◽  
Author(s):  
O. Breitenstein ◽  
J.P. Rakotoniaina ◽  
F. Altmann ◽  
J. Schulz ◽  
G. Linse
Keyword(s):  
Spatial Resolution ◽  
Electronic Device ◽  
Imaging Techniques ◽  
Heat Diffusion ◽  
Acquisition Time ◽  
Temperature Modulation ◽  
Heat Sources ◽  
Ir Camera ◽  
Free Running ◽  
Lock In

Abstract In this paper new thermographic techniques with significant improved temperature and/or spatial resolution are presented and compared with existing techniques. In infrared (IR) lock-in thermography heat sources in an electronic device are periodically activated electrically, and the surface is imaged by a free-running IR camera. By computer processing and averaging the images over a certain acquisition time, a surface temperature modulation below 100 µK can be resolved. Moreover, the effective spatial resolution is considerably improved compared to stead-state thermal imaging techniques, since the lateral heat diffusion is suppressed in this a.c. technique. However, a serious limitation is that the spatial resolution is limited to about 5 microns due to the IR wavelength range of 3 -5 µm used by the IR camera. Nevertheless, we demonstrate that lock-in thermography reliably allows the detection of defects in ICs if their power exceeds some 10 µW. The imaging can be performed also through the silicon substrate from the backside of the chip. Also the well-known fluorescent microthermal imaging (FMI) technique can be be used in lock-in mode, leading to a temperature resolution in the mK range, but a spatial resolution below 1 micron.

An Infrared Microscope for Use on a Focused Ion Beam for Circuit Edit and Backside Edit Applications

2015 ◽  
Author(s):  
Alexander Richards ◽  
Matthew Weschler ◽  
Michael Durller
Keyword(s):  
Focused Ion Beam ◽  
Near Infrared ◽  
Ion Beam ◽  
Visible Spectrum ◽  
Camera System ◽  
Buried Structures ◽  
Ir Camera ◽  
Area Of Interest ◽  
Near Ultraviolet ◽  
Infrared Microscope

Abstract To help solve the navigational problem, i.e., being able to successfully locate a circuit for probing or editing without destroying chip functionality, a near-infrared (NIR), near-ultraviolet (NUV), and visible spectrum camera system was developed that attaches to most focused ion beam (FIB) or scanning electron microscope vacuum chambers. This paper reviews the details of the design and implementation of the NIR/NUV camera system, as instantiated upon the FEI FIB 200, with a particular focus on its use for the visualization of buried structures, and also for non-destructive real time area of interest location and end point detection. It specifically considers the use of the micro-optical camera system for its benefit in assisting with frontside and backside circuit edit, as well as other typical FIB milling activities. The quality of the image obtained by the IR camera rivals or exceeds traditional optical based imaging microscopy techniques.

Site Selection, Current Design and Management Practices for Land Treatment Units of Petroleum Wastes

1991 ◽  
Vol 24 (12) ◽  
pp. 83-91
Author(s):  
D. C. P. Casarini ◽  
E. Gloeden ◽  
R. C. de A. Cunha
Keyword(s):  
Site Selection ◽  
Management Practices ◽  
Design Management ◽  
Hazardous Waste Management ◽  
Land Treatment ◽  
Management Technology ◽  
Current Design ◽  
Treatment Facilities ◽  
Petroleum Refineries ◽  
Selection Of

Land treatment is defined as the hazardous waste management technology related to application and incorporation of waste into the defined treatment zone of the soil where will occur the degradation, transformation and immobilization of the constituents contained in the applied waste, to ensure protection of surface water and groundwater. This paper describes some criteria for site selection of land treatment facilities used by petroleum refineries, as well as the engineering design, management practices to optimize the process and closure and post-closure techniques.

The influence of currents on circular secondary clarifier performance and design

1996 ◽  
Vol 34 (3-4) ◽  
pp. 405-412 ◽  
Author(s):  
Andrea Deininger ◽  
Frank W. Günthert ◽  
Peter A. Wilderer
Keyword(s):  
Wastewater Treatment ◽  
Density Currents ◽  
Clear Water ◽  
Performance Measurements ◽  
Design Procedures ◽  
Secondary Clarifier ◽  
Current Design ◽  
Hydraulic Load ◽  
Novel Design ◽  
Wastewater Treatment Systems

Density currents in the deeper zones of clarifiers and currents in the clear water zone have a significant influence on clarifier performance. Measurements of flow velocity profiles were conducted in full-scale horizontally flown circular secondary clarifiers. Relations between the hydraulic load and the development of density currents could be detected. Those patterns are not taken into account in current design procedures. Stationary design approaches are mainly based on the overflow rate. Novel design methods based on the dynamic behavior of flow and density distribution in clarifiers are needed in order to improve the efficacy of wastewater treatment systems.

Front steering design guidelines formulation for e-scooters considering the influence of sitting and standing riders on self-stability and safety performance

2021 ◽  
pp. 095440702199217
Author(s):  
Milan Paudel ◽  
Fook Fah Yap
Keyword(s):  
Preventive Measures ◽  
Recent Trend ◽  
Dynamic Performance ◽  
Design Guidelines ◽  
Safety Performance ◽  
Design Parameters ◽  
Single Track ◽  
Standing Posture ◽  
Last Mile ◽  
Current Design

E-scooters are a recent trend and are viewed as a sustainable solution to ease the first and last mile problem in modern transportation. However, an alarming rate of accidents, injuries, and fatalities have caused a significant setback for e-scooters. Many preventive measures and legislation have been put on the e-scooters, but the number of accidents and injuries has not reduced considerably. In this paper, the current design approach of e-scooters has been analyzed, and the most common range of design parameters have been identified. Thereafter, validated mathematical models have been used to quantify the performance of e-scooters and relate them with the safety aspects. Both standing and seated riders on e-scooters have been considered, and their influence on the dynamic performance has been analyzed and compared with the standard 26-in wheel reference safety bicycle. With more than 80% of the accidents and injuries occurring from falling or colliding with obstacles, this paper tries to correlate the dynamics of uncontrolled single-track vehicles with the safety performance of e-scooters. The self-stability, handling, and braking effect have been considered as major performance matrices. The analysis has shown that the current e-scooter designs are not as stable as the reference safety bicycle. Moreover, these e-scooters have been found unstable within the most common range of legislated riding velocity. The results corroborate with the general perception that the current designs of e-scooters are less stable, easy to lose control, twitchy, or wobbly to ride. Furthermore, the standing posture of the rider on the e-scooter has been found dangerous while braking to avoid any disturbances such as potholes or obstacles. Finally, the front steering design guidelines have been proposed to help modify the current design of e-scooters to improve the dynamic performance, hence the safety of the e-scooter riders and the surroundings.

Real time fall detection using infrared cameras and reflective tapes under day/night luminance

2021 ◽  
pp. 1-16
Author(s):  
E. Ramanujam ◽  
S. Padmavathi
Keyword(s):  
Low Cost ◽  
Age Groups ◽  
Orientation Angle ◽  
Fall Detection ◽  
Living Environment ◽  
Vision Systems ◽  
Ir Camera ◽  
Cluttered Environments ◽  
Infrared Cameras ◽  
Time Fall

Falls are the leading cause of injuries and death in elderly individuals who live alone at home. The core service of assistive living technology is to monitor elders’ activities through wearable devices, ambient sensors, and vision systems. Vision systems are among the best solutions, as their implementation and maintenance costs are the lowest. However, current vision systems are limited in their ability to handle cluttered environments, occlusion, illumination changes throughout the day, and monitoring without illumination. To overcome these issues, this paper proposes a 24/7 monitoring system for elders that uses retroreflective tape fabricated as part of conventional clothing, monitored through low-cost infrared (IR) cameras fixed in the living environment. IR camera records video even when there are changes in illumination or zero luminance. For classification among clutter and occlusion, the tape is considered as a blob instead of a human silhouette; the orientation angle, fitted through ellipse modeling, of the blob in each frame allows classification that detects falls without pretrained data. System performance was tested using subjects in various age groups and “fall” or “non-fall” were detected with 99.01% accuracy.

scholarly journals Thermal Characteristics of Breast Surface Temperature in Healthy Women

2021 ◽  
Vol 18 (3) ◽  
pp. 1097
Author(s):  
Anna Lubkowska ◽  
Monika Chudecka
Keyword(s):  
Mammary Gland ◽  
Temperature Distribution ◽  
Surface Temperature ◽  
Thermal Characteristics ◽  
The Body ◽  
Imaging Method ◽  
Infrared Thermal Imaging ◽  
Ir Camera ◽  
Entire Area ◽  
Healthy Women

Thermography is widely used in the medical field, including in the detection of breast disorders. The aim of the research was to characterize the range of breast surface temperature values, taking into account the entire area of the mammary gland and, independently, the nipple, in healthy women. An additional aim was to assess the symmetry of the breast temperature distribution (using an IR camera) and the correlation of temperatures with the content of adipose tissue. Thermograms were made for the right and left breasts, each time delineating the area of the entire breast and a separate area of the nipple, chest, and abdomen. Analyzing the intergroup differences in temperature of selected body areas (Tmean), it was shown that, in all cases, they were significantly higher in younger women. Statistical analysis showed no significant differences between breast and nipple temperatures in relation to the body sides. The highest temperatures within the mammary gland were recorded for the nipple area. The use of the high-resolution digital infrared thermal imaging method in early and screening preventive diagnoses of changes in the mammary gland requires individual interpretation of the results, taking into account the assessment of the physiological pattern of temperature distribution in both breasts.

Sign in / Sign up

Export Citation Format

Share Document