scholarly journals Reducing residual stresses and deformations in selective laser melting through multi-level multi-scale optimization of cellular scanning strategy

2016 ◽  
Author(s):  
Sankhya Mohanty ◽  
Jesper H. Hattel
Keyword(s):  
Residual Stresses ◽  
Selective Laser Melting ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Multi Scale ◽  
Multi Level ◽  
Scale Optimization

Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting

2016 ◽  
Author(s):  
Bo Cheng ◽  
Subin Shrestha ◽  
Y. Kevin Chou
Keyword(s):  
Residual Stresses ◽  
Laser Beam ◽  
Selective Laser Melting ◽  
High Energy ◽  
Powder Layer ◽  
Stress Difference ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Scanning Pattern ◽  
Stress And Deformation

Selective laser melting (SLM) is one of the Additive manufacturing (AM) processes that can build physical part in an added material method from digital data. In such a process, computer designed part model will be decomposed into hundreds of thousands of layers. The layered information is then transferred to SLM equipment and the part is built in a layer by layer fashion. Each powder layer will be scanned and melted in the required region by a high energy laser beam in a given scanning pattern so as to form a desired geometry. Finally, fully functional parts can be produced by repeatedly powder deposition, melting and solidification process. This process offers numerous advantages such as tooling-free productions and design freedom in geometry. In addition, SLM process is quite suitable for complicated parts such as customer designed medical implants and internal channels which are difficult to manufacture by conventional methods such as casting and machining. However, the localized heating and cooling process can lead to defects such as high residual stress, part distortion or delamination failure in SLM fabricated parts. These potential defects may impede the wide application of this technology. It is known that the laser beam scanning path will affect the thermomechanical behaviors of the build part, and thus, altering the scanning pattern may be a feasible strategy to reduce residual stresses and deformations by influencing the heat intensity input distribution. In this study, a 3D sequentially coupled finite element method (FEM) model, incorporating a volumetric moving Gaussian heat source, powder as well as solid material temperature dependent properties and layer addition features, was developed to study the complex thermomechanical process of SLM. The model was applied to evaluate six different scanning strategies effect on part temperature, stress and deformation. The major results have been summarized as follows. (1) Among all cases tested, the out-in scanning pattern has the maximum stresses along the X and Y directions; while the 45 degree inclined scanning may reduce residual stresses in both directions. (2) Large directional stress difference can be caused by back and forth line scanning strategy while minor directional stress difference is observed for other tested cases. (3) X and Y directional stress concentration is shown around the edge of deposited layers and the interface between deposited layers and substrate for all cases. (4) The 45 degree inclined scanning case has the smallest build direction deformation while the in-out scanning case has the largest deformation among the tested cases.

scholarly journals Investigation of Performance and Residual Stress Generation of AlSi10Mg Processed by Selective Laser Melting

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Lianfeng Wang ◽  
Xiaohui Jiang ◽  
Yihong Zhu ◽  
Zishan Ding ◽  
Xiaogang Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Residual Stresses ◽  
Selective Laser Melting ◽  
Tilt Angle ◽  
Side Surface ◽  
Stress Generation ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Preheating Temperature

During the selective laser melting (SLM) process, the scanned layers are subjected to rapid thermal cycles. By working on the mechanical properties, residual stress, and microstructure, the high-temperature gradients can have significant effect on the proper functioning and the structural integrity of built parts. This work presents a comprehensive study on the scanning path type and preheating temperature for AlSi10Mg alloy during SLM. According to the results, SLM AlSi10Mg parts fabricated in chessboard scanning strategy have higher mechanical properties or at least comparable to the parts fabricated in uniformity scanning strategy. In the SLM processing, the residual stress in different parts of the specimen varies with temperature gradient, and the residual stress at the edge of the specimen is obviously larger than that at the center. Under the chessboard scanning and preheating temperature 160°C, the residual stress in each direction of the specimens reaches the minimum. Under different forming processes, the morphology of the microstructure is obviously different. With the increase of preheating temperature, the molten pool in the side surface is obviously elongated and highly unevenly distributed. From the coupling relationship between the residual stress and microstructure, it can be found that the microstructure of top surface is affected by residual stresses σx and σy. But the side surface is mainly governed by residual stress σy; moreover, the greater the residual stress, the more obvious the grain tilt. In the XY and XZ surfaces, the scanning strategy has little influence on the tilt angle of the grain. But, the tilt angle and morphology of the microstructure are obviously affected by the preheating temperature. The results show that the residual stresses can effectively change the properties of the materials under the combined influence of scanning strategy and preheating temperature.

Deformations and stresses prediction of cantilever structures fabricated by selective laser melting process

2021 ◽  
Vol 27 (3) ◽  
pp. 453-464
Author(s):  
Lan Li ◽  
Tan Pan ◽  
Xinchang Zhang ◽  
Yitao Chen ◽  
Wenyuan Cui ◽  
...  
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Selective Laser Melting ◽  
Thermal Distortion ◽  
Cantilever Beams ◽  
Support Structures ◽  
Laser Melting ◽  
Content Type ◽  
Two Samples ◽  
Validation Experiments

Purpose During the powder bed fusion process, thermal distortion is one big problem owing to the thermal stress caused by the high cooling rate and temperature gradient. For the purpose of avoiding distortion caused by internal residual stresses, support structures are used in most selective laser melting (SLM) process especially for cantilever beams because they can assist the heat dissipation. Support structures can also help to hold the work piece in its place and reduce volume of the printing materials. The mitigation of high thermal gradients during the manufacturing process helps to reduce thermal distortion and thus alleviate cracking, curling, delamination and shrinkage. Therefore, this paper aims to study the displacement and residual stress evolution of SLMed parts. Design/methodology/approach The objective of this study was to examine and compare the distortion and residual stress properties of two cantilever structures, using both numerical and experimental methods. The part-scale finite element analysis modeling technique was applied to numerically analyze the overhang distortions, using the layer-by-layer model for predicting a part scale model. The validation experiments of these two samples were built in a SLM platform. Then average displacement of the four tip corners and residual stress on top surface of cantilever beams were tested to validate the model. Findings The validation experiments results of average displacement of the four tip corners and residual stress on top surface of cantilever beams were tested to validate the model. It was found that they matched well with each other. From displacement and residual stress standpoint, by introducing two different support structure, two samples with the same cantilever beam can be successfully printed. In terms of reducing wasted support materials, print time and high surface quality, sample with less support will need less post-processing and waste energy. Originality/value Numerical modeling in this work can be a very useful tool to parametrically study the feasibility of support structures of SLM parts in terms of residual stresses and deformations. It has the capability for fast prediction in the SLMed parts.

scholarly journals Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 930 ◽  
Author(s):  
Martin Malý ◽  
Christian Höller ◽  
Mateusz Skalon ◽  
Benjamin Meier ◽  
Daniel Koutný ◽  
...  
Keyword(s):  
Residual Stress ◽  
High Temperature ◽  
Residual Stresses ◽  
Relative Density ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Stress Reduction ◽  
Laser Melting ◽  
Preheating Temperature ◽  
Laser Velocity

The aim of this study is to observe the effect of process parameters on residual stresses and relative density of Ti6Al4V samples produced by Selective Laser Melting. The investigated parameters were hatch laser power, hatch laser velocity, border laser velocity, high-temperature preheating and time delay. Residual stresses were evaluated by the bridge curvature method and relative density by the optical method. The effect of the observed process parameters was estimated by the design of experiment and surface response methods. It was found that for an effective residual stress reduction, the high preheating temperature was the most significant parameter. High preheating temperature also increased the relative density but caused changes in the chemical composition of Ti6Al4V unmelted powder. Chemical analysis proved that after one build job with high preheating temperature, oxygen and hydrogen content exceeded the ASTM B348 limits for Grade 5 titanium.

Selective Laser Melting of Ti42Nb Composite Powder and the Effect of Laser Re-Melting

2019 ◽  
Vol 801 ◽  
pp. 270-275 ◽  
Author(s):  
Sheng Huang ◽  
Swee Leong Sing ◽  
Wai Yee Yeong
Keyword(s):  
Selective Laser Melting ◽  
Composite Powder ◽  
Stress Shielding ◽  
Alloyed Powder ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Implant Materials ◽  
Bio Compatibility ◽  
Alloy Systems

Ti-Nb based alloys have the potential to be used as structural implant materials due to their excellent bio-compatibility and ability to reduce stress shielding. The idea to additively manufacture Ti-Nb based alloys using selective laser melting (SLM) technology can further improve the resultant implant quality. However, the lack of economically sound and readily available pre-alloyed powder has pushed for the usage of composite powder as a means to hasten research pace in fabricating new alloy systems via SLM. The usage of Ti-Nb composite powder can lead to several problems, particularly the issue of macro-segregation. Hence, this paper presents the potential of laser re-melting scanning strategy to address macro-segregation without sacrificing (or even improving) density of parts fabricated by SLM.

Sign in / Sign up

Export Citation Format

Share Document