scholarly journals Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

2015 ◽  
Author(s):  
Sankhya Mohanty ◽  
Jesper H. Hattel
Keyword(s):  
Selective Laser Melting ◽  
Processing Parameters ◽  
Laser Melting ◽  
Scanning Strategy

scholarly journals 3D Multi-Track and Multi-Layer Epitaxy Grain Growth Simulations of Selective Laser Melting

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7346
Author(s):  
Amir Reza Ansari Dezfoli ◽  
Yu-Lung Lo ◽  
M. Mohsin Raza
Keyword(s):  
Cooling Rate ◽  
Grain Growth ◽  
Selective Laser Melting ◽  
Laser Scanning ◽  
Processing Parameters ◽  
Grain Structure ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Integrated Simulation ◽  
3D Finite Element Method

An integrated simulation framework consisting of the 3D finite element method and 3D cellular automaton method is presented for simulating the multi-track and multi-layer selective laser melting (SLM) process. The framework takes account of all the major multi-physics phenomena in the SLM process, including the initial grain structure, the growth kinetics, the laser scanning strategy, the laser–powder and laser–matter interactions, the melt flow, and the powder-to-liquid-to-solid transformations. The feasibility of the proposed framework is demonstrated by simulating the evolution of the epitaxy grain structure of Inconel 718 (IN718) during a 15-layer SLM process performed using a bi-directional 67° rotation scanning strategy and various SLM process parameters. The simulation results are found to be in good agreement with the experimental observations obtained in the present study and in the literature. In particular, a strong (001) texture is observed in the final component, which indicates that the grains with a preferred <001> orientation win the competitive epitaxy grain growth process. In addition, the size and shape of the IN718 grains are governed primarily by the cooling rate, where the cooling rate is determined in turn by the SLM parameters and the build height. Overall, the results show that the proposed framework provides an accurate approach for predicting the final microstructures of SLM components, and therefore, it can play an important role in optimizing the SLM processing parameters in such a way as to produce components with the desired mechanical properties.

scholarly journals High Bending Strength Hypereutectic Al-22Si-0.2Fe-0.1Cu-Re Alloy Fabricated by Selective Laser Melting

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 528
Author(s):  
Chunyue Yin ◽  
Zhehao Lu ◽  
Xianshun Wei ◽  
Biao Yan ◽  
Pengfei Yan
Keyword(s):  
Selective Laser Melting ◽  
Bending Strength ◽  
Primary Silicon ◽  
Processing Parameters ◽  
Powder Materials ◽  
Laser Melting ◽  
Maximum Value ◽  
Fine Microstructure ◽  
Average Size ◽  
Al Matrix

The objective of the study is to investigate the corresponding microstructure and mechanical properties, especially bending strength, of the hypereutectic Al-Si alloy processed by selective laser melting (SLM). Almost dense Al-22Si-0.2Fe-0.1Cu-Re alloy is fabricated from a novel type of powder materials with optimized processing parameters. Phase analysis of such Al-22Si-0.2Fe-0.1Cu-Re alloy shows that the solubility of Si in Al matrix increases significantly. The fine microstructure can be observed, divided into three zones: fine zones, coarse zones, and heat-affected zones (HAZs). Fine zones are directly generated from the liquid phase with the characteristic of petaloid structures and bulk Al-Si eutectic. Due to the fine microstructure induced by the rapid cooling rate of SLM, the primary silicon presents a minimum average size of ~0.5 μm in fine zones, significantly smaller than that in the conventional produced hypereutectic samples. Moreover, the maximum value of Vickers hardness reaches ~170 HV0.2, and bending strength increases to 687.70 MPa for the as-built Al-22Si-0.2Fe-0.1Cu-Re alloys parts, which is much higher than that of cast counterparts. The formation mechanism of this fine microstructure and the enhancement reasons of bending strength are also discussed.

Effects of processing parameters on rapid manufacturing 90W–7Ni–3Fe parts via selective laser melting

2010 ◽  
Vol 53 (4) ◽  
pp. 310-317 ◽  
Author(s):  
R. D. Li ◽  
J. H. Liu ◽  
Y. S. Shi ◽  
L. Zhang ◽  
M. Z. Du
Keyword(s):  
Selective Laser Melting ◽  
Processing Parameters ◽  
Rapid Manufacturing ◽  
Laser Melting

Mechanical Behaviour of Gas Nitrided Ti6Al4V Bars Produced by Selective Laser Melting

2016 ◽  
Vol 704 ◽  
pp. 225-234 ◽  
Author(s):  
Peter Franz ◽  
Aamir Mukhtar ◽  
Warwick Downing ◽  
Graeme Smith ◽  
Ben Jackson
Keyword(s):  
Heat Treatment ◽  
Selective Laser Melting ◽  
Nitrided Layer ◽  
Xrd Analysis ◽  
Compound Layer ◽  
Processing Parameters ◽  
Heat Treatments ◽  
Laser Melting ◽  
Gas Nitriding ◽  
Heat Treated

Gas atomized Ti-6Al-4V (Ti64) alloy powder was used to prepare distinct designed geometries with different properties by selective laser melting (SLM). Several heat treatments were investigated to find suitable processing parameters to strengthen (specially to harden) these parts for different applications. The results showed significant differences between tabulated results for heat treated billet Ti64 and SLM produced Ti64 parts, while certain mechanical properties of SLM Ti64 parts could be improved by different heat treatments using different processing parameters. Most heat treatments performed followed the trends of a reduction in tensile strength while improving ductility compared with untreated SLM Ti64 parts.Gas nitriding [GN] (diffusion-based thermo-chemical treatment) has been combined with a selected heat treatment for interstitial hardening. Heat treatment was performed below β-transus temperature using minimum flow of nitrogen gas with a controlled low pressure. The surface of the SLM produced Ti64 parts after gas nitriding showed TiN and Ti2N phases (“compound layer”, XRD analysis) and α (N) – Ti diffusion zones as well as high values of micro-hardness as compared to untreated SLM produced Ti64 parts. The microhardness profiles on cross section of the gas nitrided SLM produced samples gave information about the i) microhardness behaviour of the material, and ii) thickness of the nitrided layer, which was investigated using energy dispersive spectroscopy (EDS) and x-ray elemental analysis. Tensile properties of the gas nitrided Ti64 bars produced by SLM under different conditions were also reported.

Correlation Between Microstructure and Tensile Properties of STS 316L and Inconel 718 Fabricated by Selective Laser Melting (SLM)

2020 ◽  
Vol 20 (11) ◽  
pp. 6807-6814
Author(s):  
Jungsub Lee ◽  
Minshik Lee ◽  
Im Doo Jung ◽  
Jungho Choe ◽  
Ji-Hun Yu ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Tensile Properties ◽  
Selective Laser Melting ◽  
Inconel 718 ◽  
Tensile Elongation ◽  
Processing Condition ◽  
Processing Parameters ◽  
Fusion Pore ◽  
Laser Melting ◽  
Track Width

The correlation between microstructure and tensile properties of selective laser melting (SLM) processed STS 316L and Inconel 718 were investigated at various heights (top, middle and bottom) and planes (YZ, ZX and XY). Columnar grains and dendrites were formed by directional growth during solidification. The average melt pool width and depth, and scan track width were similar in both specimens due to fixed processing parameters. SLM Inconel 718 has moderate tensile strength (1165 MPa) and tensile elongation (11.5%), whereas SLM STS 316L has outstanding tensile strength (656 MPa) and tensile elongation (75%) compared to other SLM processed STS 316L. Fine columnar diameter (0.5 μm) and dense microstructures (porosity: 0.35%) in SLM STS 316L promoted the enhancement of tensile elongation by suitable processing condition. Fractographic analysis suggested that the lack of fusion pore with unmelted powder should be avoided to increase tensile properties by controlling processing parameters.

Sign in / Sign up

Export Citation Format

Share Document