Comparison of low-temperature oxidation of crystalline Si and B with a-Si:B alloy: An x-ray photoelectron spectroscopy study

1997 ◽  
Vol 15 (2) ◽  
pp. 279-283 ◽  
Author(s):  
G.-R. Yang ◽  
Y.-P. Zhao ◽  
M. Abburi ◽  
S. Dabral ◽  
B. Y. Tong
Keyword(s):  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
Spectroscopy Study ◽  
Low Temperature Oxidation ◽  
Temperature Oxidation ◽  
X Ray

Low Temperature Oxidation Processing with High Purity Ozone

1996 ◽  
Vol 429 ◽  
Author(s):  
A. Kurokawa ◽  
S. Ichimura ◽  
H. J. Kang ◽  
D. W. Moon
Keyword(s):  
Low Temperature ◽  
Thermal Oxidation ◽  
High Purity ◽  
Photoelectron Spectroscopy ◽  
Oxide Formation ◽  
Low Temperature Oxidation ◽  
Temperature Oxidation ◽  
X Ray

AbstractTo lower the temperature of oxide-passivation processing the high- purity ozone (more than 98 mole %) was used instead of usual thermal oxidation. Initial oxide formation on a Si(111) surface with high-purity ozone is investigated by X-ray photoelectron spectroscopy (XPS). From the comparison of the suboxides formed with ozone and oxygen exposures, it is clear that ozone forms less suboxide than oxygen. The oxidation with ozone also proceeds on the hydrogen passivated surface which oxygen molecules do not oxidize.

scholarly journals ITO/SiO2/ITO Structure on a Sapphire Substrate Using the Oxidation of Ultra-Thin Si Films as an Insulating Layer for One-Glass-Solution Capacitive Touch-Screen Panels

Coatings ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 134 ◽  
Author(s):  
Shin Yong Joo ◽  
Chadrasekhar Loka ◽  
Young Woong Jo ◽  
Maddipatla Reddyprakash ◽  
Sung Whan Moon ◽  
...  
Keyword(s):  
Low Temperature ◽  
Sapphire Substrate ◽  
Indium Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Touch Screen ◽  
Sio2 Film ◽  
Silicon Films ◽  
Low Temperature Oxidation ◽  
Temperature Oxidation ◽  
Si Films

The SiO2 generated by low-temperature oxidation of ultra-thin metallic silicon (thickness = 50 nm) film was evaluated for implementation in one-glass-solution capacitive touch-screen panels (OGS-TSPs) on sapphire-based substrates. Our results show that the silicon films oxidized at 823 K exhibited the highest visible transmittance about 91% at 550 nm, compared to ~72% transmittance of the as-deposited silicon films which were deposited at room temperature. Additionally, the annealed films exhibited a more uniform, dense, and smooth surface microstructure than that of the as-deposited Si films. X-ray photoelectron spectroscopy (XPS) results revealed that the low-temperature oxidation of Si films at 823 K yielded SiO2. Furthermore, when the insulating SiO2 film obtained by low-temperature oxidation was sandwiched between two indium tin oxide (ITO) layers (ITO/SiO2/ITO) on a sapphire substrate, the SiO2 film resulted in the dielectric strength of approximately 3 MV/cm. In addition, the highest optical transmittance obtained by the ITO/SiO2/ITO films is about 88.3%. The change in capacitance of the ITO/SiO2/ITO structure was approximately 3.2 pF, which indicates the possibility of implementation in capacitive touch-screen panel devices.

X-ray Photoelectron Spectroscopy Study of High- and Low-Temperature Forms of Zirconium Titanate

1991 ◽  
Vol 74 (6) ◽  
pp. 1459-1462 ◽  
Author(s):  
Hiroyuki Ikawa ◽  
Toshiyuki Yamada ◽  
Kenji Kojima ◽  
Shigeo Matsumoto
Keyword(s):  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
Zirconium Titanate ◽  
Spectroscopy Study ◽  
X Ray

scholarly journals X-ray photoelectron spectroscopy study of low-temperature molybdenum oxidation process

1999 ◽  
Vol 85 (12) ◽  
pp. 8415-8418 ◽  
Author(s):  
S. I. Castañeda ◽  
I. Montero ◽  
J. M. Ripalda ◽  
N. Dı́az ◽  
L. Galán ◽  
...  
Keyword(s):  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
Oxidation Process ◽  
Spectroscopy Study ◽  
X Ray

Low Temperature Oxidation of Cu-Base Leadframe and Cu/Emc Interface Adhesion

1996 ◽  
Vol 445 ◽  
Author(s):  
Soon-Jin Cho ◽  
Kyung-Wook Paik
Keyword(s):  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
Early Stage ◽  
Kinetic Studies ◽  
Oxide Thickness ◽  
Low Temperature Oxidation ◽  
Copper Oxidation ◽  
Temperature Oxidation ◽  
Pull Strength ◽  
20 Nm

AbstractLow temperature oxidation of a Cu-base leadframe has been investigated to understand the effect of Cu oxidation on the adhesion between Cu-base leadframes (Cu L/F) and epoxy molding compounds (EMC). From the kinetic studies on the oxidation, oxide growth was found to follow the parabolic rate law in the temperature range of 150 °C to 300 °C and the activation energy for the oxidation was 17.0 kcal/mol. X-ray photoelectron spectroscopy (XPS) studies confirmed that the oxide film consisted of Cu2O, CuO, and NiO. It was shown that the early stage of oxidation improved the adhesion strength. Furthermore the optimum copper oxide thickness required for the maximum pull strength ranged between 20 nm and 30 nm. The high pull strength was presumably due to the increase of surface wettability and mechanical interlocking effects resulting from copper oxidation.

Sign in / Sign up

Export Citation Format

Share Document