Guided Wave Generation and Propagation in Self-Sensing Piezoelectric Composite Plates for Structural Health Monitoring

2018 ◽  
Author(s):  
Junzhen Wang ◽  
Yanfeng Shen
Keyword(s):  
Finite Element ◽  
Impact Damage ◽  
Composite Plates ◽  
Wave Generation ◽  
Absorbing Boundary Conditions ◽  
Guided Wave ◽  
Piezoelectric Composite ◽  
Finite Element Software ◽  
The Impact ◽  
Wave Modes

This paper presents a systematic numerical investigation of guided wave generation, propagation, interaction with damage, and reception in anisotropic piezoelectric composite plates. This approach employs piezoelectric composite materials as both load bearing and sensing elements. Finite element modal analysis of a plate unit cell with Bloch-Floquet boundary condition is performed to understand the guided wave propagation characteristics in piezoelectric composite plates. The guided wave generation and tuning characteristics are investigated using the harmonic analysis model with absorbing boundary conditions. The relationship between the generated wave modes and the laminate layup orientations is studied. Subsequently, an impact damage is introduced and modeled as a group of cone shape delaminated layers and stiffness losses within the layers through the thickness direction. 2D and 3D transient dynamic coupled-field finite element models are constructed to simulate the procedure of guided wave generation, propagation, interaction with the impact damage, and reception in an orthotropic piezoelectric composite plate using the commercial finite element software (ANSYS). In addition, Contact Acoustic Nonlinearity (CAN) is simulated via time domain transient analysis. Advanced signal processing techniques are used to extract the distinctive nonlinear features. The frequency-wavenumber analysis is further adopted to decipher wave modes and frequency components in the scattered wave field. This paper finishes with concluding remarks and suggestions for future work.

scholarly journals Modeling Analysis of Guided Ultrasonic Waves in Composite Plates with Impact Damage

2018 ◽  
Vol 7 (4.26) ◽  
pp. 175
Author(s):  
Noorfaten Asyikin Ibrahim ◽  
Bibi Intan Suraya Murat
Keyword(s):  
Composite Structures ◽  
Impact Damage ◽  
Composite Plates ◽  
Guided Wave ◽  
Ultrasonic Waves ◽  
Fe Model ◽  
Element Analysis ◽  
Damage Area ◽  
Guided Ultrasonic Waves ◽  
The Impact

This paper investigates the propagation of guided ultrasonic waves and the interaction with impact damage in composite plates using a full three-dimensional Finite Element analysis. Impact damage in the composite plate was modeled as rectangular- and T-shaped delaminations. In order to provide guidelines for extending the modeling of realistic multimode impact damage, the impact damage was modeled as a combination of the delamination and reduced materials properties. The information obtained from these methods was compared to the experimental results around the damage area for a validation. There was a reasonable similarity between the experimental and FE results. The FE simulations can effectively model the scattering characteristics of the A0 mode wave propagation in anisotropic composite plates. This suggests that the simplified and easy-to-implement FE model could be used to represent the complex impact damage in composite plates. This could be useful for the improvement of the FE modeling and performance of guided wave methods for the in-situ NDE of large composite structures. 

scholarly journals Multimode Guided Wave Detection for Various Composite Damage Types

2020 ◽  
Vol 10 (2) ◽  
pp. 484 ◽  
Author(s):  
Hanfei Mei ◽  
Robin James ◽  
Mohammad Faisal Haider ◽  
Victor Giurgiutiu
Keyword(s):  
Composite Plate ◽  
Guided Waves ◽  
Impact Damage ◽  
Guided Wave ◽  
Wave Detection ◽  
Composite Damage ◽  
Cfrp Composite ◽  
The Impact ◽  
Damage Types ◽  
Wave Modes

This paper presents a new methodology for detecting various types of composite damage, such as delamination and impact damage, through the application of multimode guided waves. The basic idea is that various wave modes have different interactions with various types of composite damage. Using this method, selective excitations of pure-mode guided waves were achieved using adjustable angle beam transducers (ABTs). The tuning angles of various wave modes were calculated using Snell’s law applied to the theoretical dispersion curves of composite plates. Pitch–catch experiments were conducted on a 2-mm quasi-isotropic carbon fiber-reinforced polymer (CFRP) composite plate to validate the excitations of pure fundamental symmetric mode (S0) and shear horizontal mode (SH0). The generated pure S0 mode and SH0 mode were used to detect and separate the simulated delamination and actual impact damage. It was observed that S0 mode was only sensitive to the impact damage, while SH0 mode was sensitive to both simulated delamination and impact damage. The use of pure S0 and SH0 modes allowed for damage separation. In addition, the proposed method was applied to a 3-mm-thick quasi-isotropic CFRP composite plate using multimode guided wave detection to distinguish between delamination and impact damage. The experimental results demonstrated that the proposed method has a good capability to detect and separate various damage types in composite structures.

Contribution of Lamb wave modes in the formation of higher order modes cluster (HOMC) guided waves

2021 ◽  
pp. 095440622110424
Author(s):  
Z Abbasi ◽  
F Honarvar
Keyword(s):  
Finite Element ◽  
Wave Packet ◽  
Lamb Wave ◽  
Guided Waves ◽  
Element Model ◽  
Higher Order ◽  
Guided Wave ◽  
Cross Sectional ◽  
Higher Order Modes ◽  
Wave Modes

In recent years, Higher Order Modes Cluster (HOMC) guided waves have been considered for ultrasonic testing of plates and pipes. HOMC guided waves consist of higher order Lamb wave modes that travel together as a single nondispersive wave packet. The objective of this paper is to investigate the effect of frequency-thickness value on the contribution of Lamb wave modes in an HOMC guided wave. This is an important issue that has not been thoroughly investigated before. The contribution of each Lamb wave mode in an HOMC guided wave is studied by using a two-dimensional finite element model. The level of contribution of various Lamb wave modes to the wave cluster is verified by using a 2D FFT analysis. The results show that by increasing the frequency-thickness value, the order of contributing modes in the HOMC wave packet increases. The number of modes that comprise a cluster also increases up to a specific frequency-thickness value and then it starts to decrease. Plotting of the cross-sectional displacement patterns along the HOMC guided wave paths confirms the shifting of dominant modes from lower to higher order modes with increase of frequency-thickness value. Experimental measurements conducted on a mild steel plate are used to verify the finite element simulations. The experimental results are found to be in good agreement with simulations and confirm the changes observed in the level of contribution of Lamb wave modes in a wave cluster by changing the frequency-thickness value.

Runway debris impact threat maps for transport aircraft

2014 ◽  
Vol 118 (1201) ◽  
pp. 229-266 ◽  
Author(s):  
S. N. Nguyen ◽  
E. S. Greenhalgh ◽  
J. M. R. Graham ◽  
A. Francis ◽  
R. Olsson
Keyword(s):  
Finite Element ◽  
Finite Element Modelling ◽  
Impact Damage ◽  
Landing Gear ◽  
Aerodynamic Forces ◽  
Element Modelling ◽  
Transport Aircraft ◽  
Lift And Drag ◽  
The Impact ◽  
Debris Impact

AbstractLarge transport aircraft are particularly susceptible to impact damage from runway debris thrown up by the landing gear. A methodology was developed to predict the trajectories of stones lofted by the nose wheel and subjected to aerodynamic forces due to the wake behind the nose landing gear and beneath the aircraft. In conjunction with finite element modelling of the stone/ground/tyre contact mechanics, an analytical model was used to perform a stochastic prediction of the trajectories of runway stones to generate impact threat maps which showed the relative likelihood of stones impinging upon various areas on the underside of a C-130 Hercules. The impact envelopes for the C-130 extended three to eighteen metres behind the nose wheel and two metres either side of the centre of the aircraft. The impact threat maps were especially sensitive to the values of the coefficients of lift and drag acting on the stone during its flight.

scholarly journals Collapse Analysis of a Transmission Tower-Line System Induced by Ice Shedding

2021 ◽  
Vol 9 ◽  
Author(s):  
Jiaxiang Li ◽  
Biao Wang ◽  
Jian Sun ◽  
Shuhong Wang ◽  
Xiaohong Zhang ◽  
...  
Keyword(s):  
Finite Element ◽  
Transmission Lines ◽  
Progressive Collapse ◽  
Element Model ◽  
Transmission Tower ◽  
Line System ◽  
Finite Element Software ◽  
Transmission Towers ◽  
Ice Shedding ◽  
The Impact

Ice shedding causes transmission lines to vibrate violently, which induces a sharp increase in the longitudinal unbalanced tension of the lines, even resulting in the progressive collapse of transmission towers in serious cases, which is a common ice-based disaster for transmission tower-line systems. Based on the actual engineering characteristics of a 500 kV transmission line taken as the research object, a finite element model of a two-tower, three-line system is established by commercial ANSYS finite element software. In the modeling process, the uniform mode method is used to introduce the initial defects, and the collapse caused by ice shedding and its influencing parameters are systematically studied. The results show that the higher the ice-shedding height is, the greater the threat of ice shedding to the system; furthermore, the greater the span is, the shorter the insulator length and the greater the dynamic response of the line; the impact of ice shedding should be considered in the design of transmission towers.

Ballistic penetration of conically cylindrical steel projectile into 3D orthogonal woven composite: a finite element study at microstructure level

2010 ◽  
Vol 45 (9) ◽  
pp. 965-987 ◽  
Author(s):  
Xiwen Jia ◽  
Baozhong Sun ◽  
Bohong Gu
Keyword(s):  
Finite Element ◽  
Impact Damage ◽  
Woven Composite ◽  
Strain Wave ◽  
Microstructure Model ◽  
Wave Distribution ◽  
Cylindrical Steel ◽  
3D Orthogonal Woven ◽  
The Impact ◽  
Ballistic Penetration

Ballistic penetration of conically cylindrical steel projectile into 3D orthogonal woven composite (3DOWC) was investigated from finite element analyses and ballistic impact tests. Based on the observation of the microstructure of the 3DOWC, a microstructure model was established for finite element calculation. In this model, the cross-section of warp, weft and Z-direction fiber tows was regarded as rectangular. The noninterwoven warp and weft yarns were bonded together with Z-yarns. The impact damage and energy absorption of the 3DOWC penetrated by a conically cylindrical steel projectile were calculated from the microstructure model and compared with the testing results. Good agreements with experiments have been observed, especially for deformation, damage evolution, and strain wave distribution in the 3DOWC under ballistic penetration.

CALCULATION OF DISPERSION CURVES FOR ARBITRARY WAVEGUIDES USING FINITE ELEMENT METHOD

2014 ◽  
Vol 06 (05) ◽  
pp. 1450059 ◽  
Author(s):  
KAIGE ZHU ◽  
DAINING FANG
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Guided Waves ◽  
Dispersion Curves ◽  
Guided Wave ◽  
Sandwich Plates ◽  
Multilayered Structures ◽  
Finite Element Software ◽  
Honeycomb Sandwich ◽  
Element Method

Dispersion curves for waveguide structures are an important prerequisite for the implementation of guided wave-based nondestructive evaluation (NDE) approach. Although many methods exist, each method is only applicable to a certain type of structures, and also requires complex programming. A Bloch theorem-based finite element method (FEM) is proposed to obtain dispersion curves for arbitrary waveguides using commercial finite element software in this paper Dispersion curves can be obtained for a variety of structures, such as homogeneous plates, multilayered structures, finite cross section rods and honeycomb sandwiches. The propagation of guided waves in honeycomb sandwich plates and beams are discussed in detail. Then, dispersion curves for honeycomb sandwich beams are verified by experiments.

scholarly journals Assessment of low-velocity impact damage in composites by the measure of second-harmonic guided waves with the phase-reversal approach

2019 ◽  
Vol 103 (1) ◽  
pp. 003685041988107 ◽  
Author(s):  
Weibin Li ◽  
Chang Jiang ◽  
Xinlin Qing ◽  
Liangbing Liu ◽  
Mingxi Deng
Keyword(s):  
Guided Waves ◽  
Second Harmonic ◽  
Impact Damage ◽  
Guided Wave ◽  
Second Order ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Phase Reversal ◽  
The Impact

Structural strength and integrity of composites can be considerably affected by the low-velocity impact damage due to the unique characteristics of composites, such as layering bonded by adhesive and the weakness to impact. For such damage, there is an urgent need to develop advanced nondestructive testing approaches. Despite the fact that the second harmonics could provide information sensitive to the structural health condition, the diminutive amplitude of the measured second-order harmonic guided wave still limits the applications of the second-harmonic generation–based nonlinear guided wave approach. Herein, laminated composites suffered from low-velocity impact are characterized by use of nonlinear guided waves. An enhancement in the signal-to-noise ratio for the measure of second harmonics is achieved by a phase-reversal method. Results obtained indicate a monotonic correlation between the impact-induced damage in composites and the relative acoustic nonlinear indicator of guided waves. The experimental finding in this study shows that the measure of second-order harmonic guided waves with a phase-reversal method can be a promising indicator to impact damage rendering in an improved and reliable manner.

Analyze the Impact of the Thin-Walled Hollow Pier by Construction of Reservoir

2013 ◽  
Vol 438-439 ◽  
pp. 1262-1264
Author(s):  
Ke Dong Tang ◽  
Feng Gui Jin
Keyword(s):  
Finite Element ◽  
Realistic Model ◽  
Finite Element Software ◽  
Before And After ◽  
Reservoir Construction ◽  
Thin Walled ◽  
The Impact

The river dam intends to build at 280m downstream of a built bridge. This paper, using ANSYS finite element software, establishes a rational and realistic model to analyze the influence of the reservoir construction on the thin-walled hollow pier of built bridge. The variation of the stress of the bridge thin-walled hollow pier before and after impounding of the reservoir is given out, which can be as a guidance for future reinforcing the thin-walled hollow pier.

Sign in / Sign up

Export Citation Format

Share Document