Numerical Study on Effects of Axial-Slot Casing Treatment on Peak Efficiency of Axial Compressors

2016 ◽  
Author(s):  
Ning Ma ◽  
Xi Nan ◽  
Feng Lin
Keyword(s):  
Numerical Study ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Peak Efficiency ◽  
Leakage Loss ◽  
Casing Treatment ◽  
Axial Compressors ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Casing Treatments

Axial compressors can obtain substantial improvement on stall margin by using axial-slot casing treatments. However, this type of casing treatment usually yields large peak efficiency penalty due to the interaction between the slots and rotor tip region where the tip leakage flow plays an important role. Therefore, as a main factor that influences the peak efficiency, the tip leakage loss was examined in this paper with a variety of slot geometries. Unsteady numerical simulations were performed on both low speed and transonic compressors with axial skewed slot casing treatments with different geometric parameters. In addition, an equation which can be applied to evaluate the tip leakage loss under casing treatment cases was derived from Denton’s leakage mixing model. The leakage loss can be expressed in terms of the cube of the tip leakage flow rate. Combined with the simulation results, the effects of the number, depth and width of the slots on both the leakage loss and peak efficiency deficit were investigated. For the transonic compressor, the impacts of shock wave and its interaction with the tip leakage flow /vortex were assessed as well. Lastly, two axial-slot casing treatments with an isosceles-trapezoid shaped opening were designed to reduce the loss in the rotor tip region. It was shown that the newly designed axial-slot casing treatments were capable of improving the peak efficiency of both compressors.

Effect of Rotor Tip Casing Treatment on the Performance and Stability of a Transonic Axial Compressor

2021 ◽  
Author(s):  
Subbaramu Shivaramaiah ◽  
Mahesh K. Varpe ◽  
Mohammed Afzal
Keyword(s):  
Research Work ◽  
Stability Margin ◽  
Leakage Flow ◽  
Compressor Stage ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Stage Efficiency

Abstract In a transonic compressor rotor, tip leakage flow interacts with passage shock, casing boundary layer and secondary flow. This leads to increase in total pressure loss and reduction of compressor stability margin. Casing treatment is one of the passive endwall geometry modification technique to control tip leakage flow interaction. In the present investigation effect of rotor tip casing treatment is investigated on performance and stability of a NASA 37 transonic compressor stage. Existing literature reveals, that endwall casing treatment slots i.e., porous casing treatment, axial slots axially skewed slots, circumferential grooves, recirculating casing treatment etc. are able to improve compressor stability margin with penalty on stage efficiency. Turbomachinery engineers and scientists are still focusing their research work to identify an endwall casing treatment configuration with improves both compressor stall margin as well as stage efficiency. Hence in the current work, as an innovative idea, effect of casing treatment slot along rotor tip mean camber line is investigated on NASA 37 compressor stage. Casing treatment slot with rectangular cross-section was created along the rotor tip mean camber line. Four different casing treatment configurations were created by changing number of slots on rotor casing surface. In all four configurations casing treatment slot width and height remains same. Flow simulation of NASA 37 compressor stage was performed with all these four casing treatment configurations. A maximum stall margin improvement of 3% was achieved with a particular slot configuration, but without any increase in compressor stage efficiency.

scholarly journals Numerical Simulation of Compressor Endwall and Casing Treatment Flow Phenomena

1992 ◽  
Author(s):  
A. J. Crook ◽  
E. M. Greitzer ◽  
C. S. Tan ◽  
J. J. Adamczyk
Keyword(s):  
Total Pressure ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Field Measurements ◽  
Compressor Blade ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Dominant Feature

A numerical study is presented of the flow in the endwall region of a compressor blade row, in conditions of operation with both smooth and grooved endwalls. The computations are first compared to velocity field measurements in a cantilevered stator/rotating hub configuration to confirm that the salient features are captured. Computations are then interrogated to examine the tip leakage flow structure since this is a dominant feature of the endwall region. In particular, the high blockage that can exist near the endwalls at the rear of a compressor blade passage appears to be directly linked to low total pressure fluid associated with the leakage flow. The fluid dynamic action of the grooved endwall, representative of the casing treatments that have been most successful in suppressing stall, is then simulated computationally and two principal effects are identified. One is suction of the low total pressure, high blockage fluid at the rear of the passage. The second is energizing of the tip leakage flow, most notably in the core of the leakage vortex, thereby suppressing the blockage at its source.

Numerical Study on the Effects of Casing Treatment on Unsteadiness of Tip Leakage Flow in an Axial Compressor

2012 ◽  
Author(s):  
Yoojun Hwang ◽  
Shin-Hyoung Kang
Keyword(s):  
Numerical Study ◽  
Axial Compressor ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Operating Range ◽  
Compressor Rotor ◽  
Flow Through

A low speed axial compressor with casing treatment of axial slots was numerically investigated. Time-accurate numerical calculations were performed to simulate unsteady flow in the rotor tip region and the effects of casing treatment on the flow. Since the compressor rotor had a large tip clearance, it was found that the tip leakage flow had an inherent unsteady feature that was not associated with rotor rotation. The unsteadiness of the tip leakage flow was induced by changes in the blade loading due to the pressure distribution formed by the tip leakage flow. This characteristic is called rotating instability or self-induced unsteadiness. The frequency of the flow oscillation was found to decrease as the flow rate was reduced. On the other hand, as expected, the operating range was improved by casing treatment, as shown by calculations in good agreement with the experimentally measured data. The unsteadiness of the tip leakage flow was alleviated by the casing treatment. The interaction between the flow in the tip region and the re-circulated flow through the axial slots was observed in detail. The removal and injection of flow through the axial slots were responsible not only for the extension of the operating range but also for the alleviation of the unsteadiness. Analyses of instantaneous flow fields explained the mechanism of the interaction between the casing treatment and the unsteady oscillation of the tip leakage flow. Furthermore, the effects of changes in the amount of re-circulation and the location of the removal and injection flow on the unsteadiness of the tip leakage flow were examined.

Numerical Simulation of Compressor Endwall and Casing Treatment Flow Phenomena

1993 ◽  
Vol 115 (3) ◽  
pp. 501-512 ◽  
Author(s):  
A. J. Crook ◽  
E. M. Greitzer ◽  
C. S. Tan ◽  
J. J. Adamczyk
Keyword(s):  
Total Pressure ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Field Measurements ◽  
Compressor Blade ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Dominant Feature

A numerical study is presented of the flow in the endwall region of a compressor blade row, in conditions of operation with both smooth and grooved endwalls. The computations are first compared to velocity field measurements in a cantilevered stator/rotating hub configuration to confirm that the salient features are captured. Computations are then interrogated to examine the tip leakage flow structure since this is a dominant feature of the endwall region. In particular, the high blockage that can exist near the endwalls at the rear of a compressor blade passage appears to be directly linked to low total pressure fluid associated with the leakage flow. The fluid dynamic action of the grooved endwall, representative of the casing treatments that have been most successful in suppressing stall, is then simulated computationally and two principal effects are identified. One is suction of the low total pressure, high blockage fluid at the rear of the passage. The second is energizing of the tip leakage flow, most notably in the core of the leakage vortex, thereby suppressing the blockage at its source.

Effect of Sloped Trench Casing Treatment on Performance and Stability of Axial Compressors

2020 ◽  
Author(s):  
Hou Jiexuan ◽  
Liu Yangwei
Keyword(s):  
Working Environment ◽  
Leakage Flow ◽  
Compressor Cascade ◽  
Tip Leakage Flow ◽  
Tip Leakage Vortex ◽  
Casing Treatment ◽  
Axial Compressors ◽  
Tip Leakage ◽  
Inflow Condition ◽  
The Stability

Abstract Numerical simulations are carried out to investigate the effect of the sloped trench casing treatment on the performance and stability of a compressor cascade, an isolated rotor, and a single compressor stage. The research objects alter from a simplified flow model to an actual compressor working environment. Firstly, a detailed study of how the sloped trench casing treatment effects the tip leakage flow structure, especially the tip leakage vortex of a compressor cascade, is presented. Results show that the strength of the tip leakage vortex is weakened as the sloped trench casing treatment transforms the structure of the tip leakage vortex. Then the simulation results of the isolated rotor and the single stage are studied. For both cases, the effect of the sloped trench casing treatment on the tip leakage flow is analogous to that of the cascade case. For the isolated rotor, the improvement on the performance is not obvious. While under the stage environment, different from the traditional casing treatment, both the performance and the stability of the compressor are advanced, by getting the tip leakage vortex under control and letting the downstream stator working under a better inflow condition.

Numerical Analysis of Flow in a Transonic Compressor With a Single Circumferential Casing Groove: Application to Two Different Compressor Rotors

2014 ◽  
Author(s):  
Yasunori Sakuma ◽  
Toshinori Watanabe ◽  
Takehiro Himeno ◽  
Dai Kato ◽  
Takeshi Murooka ◽  
...  
Keyword(s):  
Flow Field ◽  
Flow Behavior ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Stall Inception ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
The Stability

The effect of a single circumferential casing groove on the stability enhancement of two different transonic compressors has been examined with CFD analysis. The differences in flow field and stall inception mechanism between two rotors are presented with principal focus on passage blockage and tip leakage flow behavior. Detailed observation showed that the blockage flow which leads the compressor to stall was different between each other. A parametric study conducted with respect to the axial location of the groove has clarified that the effect which groove has on the tip leakage flow behavior changes according to the blade tip loading and the design tip clearance gap at the location where the groove is applied. When the casing treatment was applied to the compressors with different instability mechanism, whether the casing treatment could enhance the stability of compressor or not was not only dependant on the extent of the influence which it had on the flow field but also on whether it could affect the original stall-initiating phenomena at the adequate location.

scholarly journals Effects of Tip Leakage Flow on the Aerodynamic Performance and Stability of an Axial-Flow Transonic Compressor Stage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4168
Author(s):  
Botao Zhang ◽  
Xiaochen Mao ◽  
Xiaoxiong Wu ◽  
Bo Liu
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Transonic Compressor

To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.

Experimental and Numerical Study of Honeycomb Tip on Suppressing Tip Leakage Flow in Turbine Cascade

2017 ◽  
Author(s):  
Yunfeng Fu ◽  
Fu Chen ◽  
Huaping Liu ◽  
Yanping Song
Keyword(s):  
Numerical Study ◽  
Flow Characteristics ◽  
Leakage Flow ◽  
Exit Section ◽  
Turbine Cascade ◽  
Tip Leakage Flow ◽  
Physical Processes ◽  
Tip Leakage ◽  
Gap Height ◽  
Positive Effect

In this paper, the effect of a novel honeycomb tip on suppressing tip leakage flow in a highly-loaded turbine cascade has been experimentally and numerically studied. The research focuses on the mechanisms of honeycomb tip on suppressing tip leakage flow and affecting the secondary flow in the cascade, as well as the influences of different clearance heights on leakage flow characteristics. In addition, two kinds of local honeycomb tip structures are pro-posed to explore the positive effect on suppressing leakage flow in simpler tip honeycomb structures. Based on the experimental and numerical results, the physical processes of tip leakage flow and its interaction with main flow are analyzed, the following conclusions can be obtained. Honeycomb tip rolls up a number of small vortices and radial jets in regular hexagonal honeycomb cavities, increasing the flow resistance in the clearance and reducing the velocity of leakage flow. As a result, the structure of honeycomb tip not only suppresses the leakage flow effectively, but also has positive effect on reducing the associated losses in cascade by reducing the strength of leakage vortex. Compare to the flat tip cascade at 1%H gap height, the relative leakage flow in honeycomb tip cascade reduces from 3.05% to 2.73%, and the loss at exit section is also decreased by 10.63%. With the increase of the gap height, the tip leakage flow and loss have variations of direct proportion with it, but their growth rates in the honeycomb tip cascade are smaller. Consider the abradable property of the honeycomb seal, a smaller gap height is allowed in the cascade with honeycomb tip, and that means honeycomb tip has better effect on suppressing leakage flow. Two various local honeycomb tip structures has also been discussed. It shows that local raised honeycomb tip has better suppressing leakage flow effect than honeycomb tip, while local concave honeycomb tip has no more effect than honeycomb tip. Compare to flat tip cascade, the leakage flow in honeycomb tip cascade, local concave tip cascade and local raised honeycomb tip cascade decrease by nearly 17.33%, 15.51% and 30.86% respectively, the losses at exit section is reduced by 13.38%, 12% and 28.17% respectively.

Aerodynamic Interaction Between Incoming Vortex and Tip Leakage Flow in a Turbine Cascade

2018 ◽  
Author(s):  
Kai Zhou ◽  
Chao Zhou
Keyword(s):  
Numerical Study ◽  
Aerodynamic Performance ◽  
Leakage Flow ◽  
Computational Domain ◽  
Turbine Cascade ◽  
Tip Leakage Flow ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Swirl Generator ◽  
Swirling Vortex

In turbines, secondary vortices and tip leakage vortices develop and interact with each other. In order to understand the flow physics of vortices interaction, the effects of incoming vortex on the downstream tip leakage flow are investigated in terms of the aerodynamic performance in a turbine cascade. Experimental, numerical and analytical methods are used. In the experiment, a swirl generator was used upstream near the casing to generate the incoming vortex, which interacted with the tip leakage vortex in the turbine cascade. The swirl generator was located at ten different pitchwise locations to simulate the quasi-steady effects. In the numerical study, a Rankine-like vortex was defined at the inlet of the computational domain to simulate the incoming swirling vortex. Incoming vortices with opposite directions were investigated. The vorticity of the positive incoming swirling vortex has a large vector in the same direction as that of the tip leakage vortex. In the case of the positive incoming swirling vortex, the vortex mixes with the tip leakage vortex to form one vortex near the tip as it transports downstream. The vortices interaction reduces the vorticity of the flow near the tip, as well as the loss by making up for the streamwise momentum within the tip leakage vortex core. In contrast, the negative incoming swirling vortex has little effects on the tip leakage vortex and the loss. As the negative incoming swirling vortex transports downstream, it is separated from the tip leakage vortex and forms two vortices. A triple-vortices-interaction kinetic analytical model and one-dimensional mixing model are proposed to explain the mechanism of vortex interaction on the aerodynamic performance.

Sign in / Sign up

Export Citation Format

Share Document