Irreversibility and Second Law Analysis in a Solar Cooker Box-Type

2015 ◽  
Author(s):  
Hilario Terres ◽  
Sandra Chavez ◽  
Raymundo Lopez ◽  
Arturo Lizardi ◽  
Araceli Lara ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Solar Radiation ◽  
Heat Radiation ◽  
Second Law ◽  
Heating Process ◽  
Water Heating ◽  
Glass Cover ◽  
Heated Water ◽  
Available Energy ◽  
Second Law Analysis

In this work, four different arrangements of solar cooker box-type with internal reflectors results, for irreversibility and second law efficiency are presented. The solar cooker has two glasses in its cover to diminish the losses of heat radiation and convection, which in turn creates the hot house effect inside the cooker. The interior of the cooker has flat mirrors placed at different angles to reflect the solar radiation toward recipient with water. The obtained results are based on the heated water temperatures. These are obtained by means of numerical simulation, which in turn allows the comparison under identical conditions for the cookers. The results reveal that the energy reaching the cookers, less than 5%, is used in the water heating process. Most of the available energy is “stored” into the cooker glass cover, which shows the need for further work on improving cover materials in order to diminish such a situation.

Second Law Analysis of Gas Power Cycles

1989 ◽  
Author(s):  
D. D. Agrawal ◽  
I. S. Chandrakar
Keyword(s):  
Second Law ◽  
Brayton Cycle ◽  
Work Output ◽  
Power Cycles ◽  
Available Energy ◽  
Exchange Processes ◽  
Second Law Analysis ◽  
The Universe ◽  
Selection Of ◽  
The Ideal

Second Law analysis of Gas Power Cycles, used in practice, is presented. The objective of this analysis was to compute the available energy degradations and entropy creations caused by the departures from the ideal standard such as finite temperature difference in heat exchange processes and fluid friction in different pieces of equipment. Various combinations of Brayton cycle with varying irreversibilities were analysed. It was demonstrated that the decrease of shaft work output from ideal maximum, available energy degraded and the increase in the unavailable energy of the Universe are all equal. This analysis will facilitate the selection of combination of equipment which gives more favourable work output.

Loss Coefficients in Laminar Flows: Indispensable for the Design of Micro Flow Systems

2010 ◽  
Author(s):  
H. Herwig ◽  
B. Schmandt ◽  
M.-F. Uth
Keyword(s):  
Numerical Simulation ◽  
Laminar Flow ◽  
Turbulent Flows ◽  
Head Loss ◽  
Laminar Flows ◽  
Second Law ◽  
Second Law Analysis ◽  
Micro Flow ◽  
Loss Coefficients

The concept of head loss coefficients K for the determination of losses in conduit components is discussed in detail. While so far it has mainly been applied to fully turbulent flows it is extended here to also cover the laminar flow regime. Specific numbers of K can be determined by integration of the entropy generation field (second law analysis) obtained from a numerical simulation. This general approach is discussed and illustrated for various conduit components.

scholarly journals Analytical Assessment of (Al2O3–Ag/H2O) Hybrid Nanofluid Influenced by Induced Magnetic Field for Second Law Analysis with Mixed Convection, Viscous Dissipation and Heat Generation

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 498
Author(s):  
Wasim Ullah Khan ◽  
Muhammad Awais ◽  
Nabeela Parveen ◽  
Aamir Ali ◽  
Saeed Ehsan Awan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Heat Generation ◽  
Transfer Rate ◽  
Second Law ◽  
Hybrid Nanofluid ◽  
Entropy Generation Number ◽  
Generation Number ◽  
Second Law Analysis

The current study is an attempt to analytically characterize the second law analysis and mixed convective rheology of the (Al2O3–Ag/H2O) hybrid nanofluid flow influenced by magnetic induction effects towards a stretching sheet. Viscous dissipation and internal heat generation effects are encountered in the analysis as well. The mathematical model of partial differential equations is fabricated by employing boundary-layer approximation. The transformed system of nonlinear ordinary differential equations is solved using the homotopy analysis method. The entropy generation number is formulated in terms of fluid friction, heat transfer and Joule heating. The effects of dimensionless parameters on flow variables and entropy generation number are examined using graphs and tables. Further, the convergence of HAM solutions is examined in terms of defined physical quantities up to 20th iterations, and confirmed. It is observed that large λ1 upgrades velocity, entropy generation and heat transfer rate, and drops the temperature. High values of δ enlarge velocity and temperature while reducing heat transport and entropy generation number. Viscous dissipation strongly influences an increase in flow and heat transfer rate caused by a no-slip condition on the sheet.

Sign in / Sign up

Export Citation Format

Share Document