The application of modified thermodynamic system correction method to secondary reheat steam turbine

In order to calculation the enthalpy of wet steam in the secondary reheat turbine thermal system the thermodynamic system of the secondary reheat steam turbine based on the isentropic ideal expansion process line was corrected, This method simplifies the correction calculation step and increases the accuracy of the correction result. Analysis of the rationality of the improved method shows that: Compared with the existing secondary reheat steam turbine thermal system correction method, the maximum error of the improved thermal system correction method is 0.14%. Therefore, this method can better meet the test accuracy requirements.

Thermal System Simulation Study of Wide-Load Out-Of-Stock Technical Transformation to Reduce SCR Inlet Flue Gas Temperature of 300MW Subcritical Boiler

During the operation of a 300MW subcritical boiler of a power plant, there is a low temperature of the SCR inlet flue gas under medium and low load conditions. In order to effectively solve the problem of low SCR inlet temperature under low load conditions, and improve the adaptability of the coal type. Three kinds of wide load denitration technology reform schemes are proposed. With the boiler thermal system simulation software BESS, the thermal calculations of the three transformation schemes were carried out. The results show that: the Scheme C is the optimal solution. After the transformation, the temperature of the SCR inlet flue gas increased by 21°C under the ultra-low load condition, and the exhaust gas temperature increased by about 7°C. At the same time, the possible impacts of the reform of the Scheme C and the key issues that need to be paid attention to during the transformation process are evaluated and discussed.