A FIRST AND SECOND LAW ANALYSIS OF PHASE CHANGE HEAT EXCHANGERS FOR ENERGY STORAGE

1998 ◽  
Author(s):  
K. Poornathresan ◽  
K.N. Ramesh ◽  
A. Venkata Ramayya
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Heat Exchangers ◽  
Second Law ◽  
Second Law Analysis

Second Law Analysis of Tree-Shaped Fins for the Heat Transfer Enhancement in a PCM Thermal Storage System

2013 ◽  
Author(s):  
Adriano Sciacovelli ◽  
Elisa Guelpa ◽  
Vittorio Verda
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Heat Transfer Enhancement ◽  
Solidification Rate ◽  
High Energy ◽  
Second Law ◽  
Transfer Enhancement ◽  
Energy Storage Devices ◽  
Second Law Analysis ◽  
Melting And Solidification

Latent heat thermal energy storage (LHTES) systems based on phase change materials (PCMs) are a promising option to be employed as effective energy storage devices. PCM allows one to achieve high energy storage density and almost constant temperature energy retrieval, however LHTES systems performance is limited by poor thermal conductivity of the PCMs which leads to unacceptably low melting and solidification rates. Thus, heat transfer enhancement techniques are required in order to obtain acceptable melting and solidification rates. The preliminary design of a shell-and-tube LHTES unit is investigated by means of computational fluid-dynamics (CFD). Three different fin designs are considered: a conventional radial fin, a constructal Y-shaped fin design and a non-constructal Y-shaped configuration previously investigated by the authors. The performances of each fin configuration are evaluated by means of a Second-law analysis. Moreover, local and global entropy generation rates are analyzed in order to show the main source of thermodynamic irreversibilities occurring in the system. The analysis indicates that solidification rate is significantly enhanced when Y-shaped fins are adopted in the LHTES unit, however the constructal Y-shaped geometry is not optimal since further improvements can be achieved by means of a Y-shaped fins with elongated secondary branches.

Latent Heat Storage: Container Geometry, Enhancement Techniques, and Applications—A Review

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
S. Arunachalam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Heat Exchangers ◽  
Phase Change Materials ◽  
Heat Storage ◽  
Low Thermal Conductivity

Energy storage helps in waste management, environmental protection, saving of fossil fuels, cost effectiveness, and sustainable growth. Phase change material (PCM) is a substance which undergoes simultaneous melting and solidification at certain temperature and pressure and can thereby absorb and release thermal energy. Phase change materials are also called thermal batteries which have the ability to store large amount of heat at fixed temperature. Effective integration of the latent heat thermal energy storage system with solar thermal collectors depends on heat storage materials and heat exchangers. The practical limitation of the latent heat thermal energy system for successful implementation in various applications is mainly from its low thermal conductivity. Low thermal conductivity leads to low heat transfer coefficient, and thereby, the phase change process is prolonged which signifies the requirement of heat transfer enhancement techniques. Typically, for salt hydrates and organic PCMs, the thermal conductivity range varies between 0.4–0.7 W/m K and 0.15–0.3 W/m K which increases the thermal resistance within phase change materials during operation, seriously affecting efficiency and thermal response. This paper reviews the different geometry of commercial heat exchangers that can be used to address the problem of low thermal conductivity, like use of fins, additives with high thermal conductivity materials like metal strips, microencapsulated PCM, composite PCM, porous metals, porous metal foam matrix, carbon nanofibers and nanotubes, etc. Finally, different solar thermal applications and potential PCMs for low-temperature thermal energy storage were also discussed.

scholarly journals The Impact of Heat Exchangers’ Constructions on the Melting and Solidification Time of Phase Change Materials

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4840
Author(s):  
Ewelina Radomska ◽  
Lukasz Mika ◽  
Karol Sztekler ◽  
Lukasz Lis
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Exchangers ◽  
Phase Change Materials ◽  
Storage Systems ◽  
Energy Storage Systems ◽  
Thermal Energy Storage Systems

An application of latent heat thermal energy storage systems with phase change materials seems to be unavoidable in the present world. The latent heat thermal energy storage systems allow for storing excessive heat during low demand and then releasing it during peak demand. However, a phase change material is only one of the components of a latent heat thermal energy storage system. The second part of the latent heat thermal energy storage is a heat exchanger that allows heat transfer between a heat transfer fluid and a phase change material. Thus, the main aim of this review paper is to present and systematize knowledge about the heat exchangers used in the latent heat thermal energy storage systems. Furthermore, the operating parameters influencing the phase change time of phase change materials in the heat exchangers, and the possibilities of accelerating the phase change are discussed. Based on the literature reviewed, it is found that the phase change time of phase change materials in the heat exchangers can be reduced by changing the geometrical parameters of heat exchangers or by using fins, metal foams, heat pipes, and multiple phase change materials. To decrease the phase change material’s phase change time in the tubular heat exchangers it is recommended to increase the number of tubes keeping the phase change material’s mass constant. In the case of tanks filled with spherical phase change material’s capsules, the capsules’ diameter should be reduced to shorten the phase change time. However, it is found that some changes in the constructions of heat exchangers reduce the melting time of the phase change materials, but they increase the solidification time.

scholarly journals Evaluation and Improvement of Thermal Energy of Heat Exchangers with SWCNT, GQD Nanoparticles and PCM (RT82)

2020 ◽  
Vol 79 (1) ◽  
pp. 153-168
Author(s):  
Mohammadreza Hasandust Rostami ◽  
Gholamhassan Najafi ◽  
Ali Motevalli ◽  
Nor Azwadi Che Sidik ◽  
Muhammad Arif Harun
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Heat Exchange ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Efficiency ◽  
Heat Exchangers ◽  
Phase Change Materials ◽  
Single Wall Carbon Nanotubes ◽  
In Series

Today, due to the reduction of energy resources in the world and its pollutants, energy storage methods and increase the thermal efficiency of various systems are very important. In this research, the thermal efficiency and energy storage of two heat exchangers have been investigated in series using phase change materials (RT82) and single wall carbon nanotubes (SWCNT) and graphene quantum dot nanoparticles (GQD) In this research, two heat exchangers have been used in combination. The first heat exchanger was in charge of storing thermal energy and the second heat exchanger was in charge of heat exchange. The reason for this is to improve the heat exchange of the main exchanger (shell and tube) by using heat storage in the secondary exchanger, which has not been addressed in previous research. The results of this study showed that using two heat exchangers in series, the thermal efficiency of the system has increased. Also, the heat energy storage of the double tube heat exchanger was obtained using phase change materials in the single-walled carbon nanotube composition of about 3000 W. The average thermal efficiency of the two heat exchangers as the series has increased by 52%. In general, the effect of the two heat exchangers on each other was investigated in series with two approaches (energy storage and energy conversion) using fin and nanoparticles, which obtained convincing results.

scholarly journals Applicability of MCDM Algorithms for the Selection of Phase Change Materials for Thermal Energy Storage Heat Exchangers

2021 ◽  
pp. 611-622
Author(s):  
Paul Gregory Felix ◽  
Velavan Rajagopal ◽  
Kannan Kumaresan
Keyword(s):  
Energy Storage ◽  
Physical Properties ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Exchangers ◽  
Phase Change Materials ◽  
Weight Estimation ◽  
Thermo Physical Properties ◽  
Selection Of

Latent heat thermal energy storage heat exchangers store heat energy by virtue of the phase transition that occurs in the thermal storage media. Since phase change materials (PCMs) are utilized as the media, there is a critical necessity for the appropriate selection of the PCM utilized. Since multiple thermo-physical properties and multiple PCMs are required to be evaluated for the selection, there arises a need for multiple criteria decision making (MCDM) algorithms to be adopted for the selection. But owing to the different weight estimation techniques employed and the voluminous quantity of selection algorithms available, there arises a need for a comparative methodology to be adopted. This study was intended to select an optimal PCM for a sustainable steam cooking application coupled with a thermal energy storage system. In this research study, six PCMs were chosen as the alternatives and five thermo-physical properties were chosen as the criteria for the evaluation. 11 different algorithms were augmented with 3 different weight estimation techniques and therefore a total of 33 algorithms were employed in this study. All of the algorithms have chosen Erythritol as the optimal PCM for the application. The outcomes of the MCDM algorithms have been validated through an intricate Pearson’s correlation coefficient study.

Sign in / Sign up

Export Citation Format

Share Document