Static Modes Switching: On-Line Variable Static Augmentation for Efficient Flexible Multibody Simulation

2011 ◽  
Author(s):  
Tommaso Tamarozzi ◽  
Gert H. K. Heirman ◽  
Wim Desmet
Keyword(s):  
Computational Efficiency ◽  
Degrees Of Freedom ◽  
A Priori ◽  
The Body ◽  
Multibody Simulation ◽  
External Excitation ◽  
Flexible Bodies ◽  
General Methodology ◽  
On Line ◽  
Gear Contact

This paper discusses and further investigates a new methodology, “Static Modes Switching” (SMS), improving computational efficiency for elastic multibody (EMBS) systems. This method focuses on mechanisms in which loading is possible in many degrees of freedom, but only few of them are simultaneously loaded at a given moment in time (e.g. sliding elements, gear contact, etc.). The methodology adapts during simulation the mode set used to represent component flexibility, by judiciously choosing only those static modes that are contributing actively to the body deformation. First, the general methodology is presented, then the current work and its original contributions are discussed; namely SMS is tested on a 3D mechanism including multiple flexible bodies on which sliding elements are present. Moreover, as opposed to previous studies, the locations where external excitation is acting is not known a priori. Finally, some limitations of the proposed methodology are treated with focus on the numerical discontinuities introduced by the switching of the modal base and their propagation to neighbouring bodies.

Force strategies for on-line obstacle avoidance for redundant manipulators

Robotica ◽  
2003 ◽  
Vol 21 (6) ◽  
pp. 633-644 ◽  
Author(s):  
Leon Zlajpah ◽  
Bojan Nemec
Keyword(s):  
Obstacle Avoidance ◽  
Degrees Of Freedom ◽  
Null Space ◽  
Tactile Sensor ◽  
The Body ◽  
Stiff Systems ◽  
Task Space ◽  
Planar Manipulators ◽  
On Line ◽  
Time Varying Environment

The paper deals with on-line obstacle avoidance in an unstructured environment based on the force strategy. The obstacle avoidance is considered as a control problem. We discuss three approaches regarding the sensors used to detect the obstacles. First we investigate how obstacles can be avoided without using any sensors to detect them. To solve the problem we make use of a very basic principle: an action causes a reaction. For backdrivable manipulators we propose a controller which ensures stiff behaviour in the task space and compliant behaviour in the null space. Using such control the tracking capabilities in the task space can be preserved and the redundant degrees of freedom are used to avoid the obstacle after the collision. The tactile sensors are proposed to be used as the alternative for stiff systems. A tactile sensor detects an obstacle and the controller generates the avoiding motion. Last, we present a virtual forces approach which can be applied to the systems with proximity sensors. The objective is to assign each point on the body of the manipulator, which is close to the obstacle force component in a direction that is away from the obstacle. The proposed formulation avoids the problem of singular configurations and is very suitable when many obstacles are present in the neighbourhood of the manipulator. The computational efficiency of the proposed algorithms allows real-time application in a unstructured or time-varying environment. The efficiency of the proposed control algorithms is illustrated by simulations of highly redundant planar manipulators and by experiments on a four link planar manipulator.

scholarly journals Contact Model Between Superelements in Dynamic Multibody Systems

2013 ◽  
Author(s):  
Geoffrey Virlez ◽  
Olivier Brüls ◽  
Valentin Sonneville ◽  
Emmanuel Tromme ◽  
Pierre Duysinx ◽  
...  
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Element Model ◽  
The Body ◽  
Elastic Model ◽  
Flexible Bodies ◽  
Contact Formulation ◽  
Rigid Contact ◽  
Contact Models ◽  
Corotational Frame

In this paper, a new contact formulation defined between flexible bodies modeled as superelements is investigated. Unlike rigid contact models, this approach enables to study the deformation and vibration phenomena induced by hard contacts. Compared with full-scale finite element models of flexible bodies, the proposed method is computationally more efficient, especially in case of a large number of bodies and contact conditions. The compliance of each body is described using a reduced-order elastic model which is defined in a corotational frame that follows the gross motion of the body. The basis used to reduce the initial finite element model relies on the Craig-Bampton method which uses both static boundary modes and internal vibration modes. The formulation of the contact condition couples all degrees of freedom of the reduced model in a nonlinear way. The relevance of the approach is demonstrated by simulation results first on a simple example, and then on a gear pair model.

Representing utility and deploying the body

2020 ◽  
Vol 43 ◽  
Author(s):  
David Spurrett
Keyword(s):  
Functional Activity ◽  
Degrees Of Freedom ◽  
The Body ◽  
Target Article ◽  
Processing Demands ◽  
The Many

Abstract Comprehensive accounts of resource-rational attempts to maximise utility shouldn't ignore the demands of constructing utility representations. This can be onerous when, as in humans, there are many rewarding modalities. Another thing best not ignored is the processing demands of making functional activity out of the many degrees of freedom of a body. The target article is almost silent on both.

The Influence of Loading Position in A Priori High Stress Detection using Mode Superposition

2020 ◽  
Vol 1 (1) ◽  
pp. 93-102
Author(s):  
Carsten Strzalka ◽  
◽  
Manfred Zehn ◽  
Keyword(s):  
Finite Element ◽  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
A Priori ◽  
High Stress ◽  
Von Mises Stress ◽  
Detailed Knowledge ◽  
Variable Loading ◽  
Numerical Effort ◽  
Von Mises

For the analysis of structural components, the finite element method (FEM) has become the most widely applied tool for numerical stress- and subsequent durability analyses. In industrial application advanced FE-models result in high numbers of degrees of freedom, making dynamic analyses time-consuming and expensive. As detailed finite element models are necessary for accurate stress results, the resulting data and connected numerical effort from dynamic stress analysis can be high. For the reduction of that effort, sophisticated methods have been developed to limit numerical calculations and processing of data to only small fractions of the global model. Therefore, detailed knowledge of the position of a component’s highly stressed areas is of great advantage for any present or subsequent analysis steps. In this paper an efficient method for the a priori detection of highly stressed areas of force-excited components is presented, based on modal stress superposition. As the component’s dynamic response and corresponding stress is always a function of its excitation, special attention is paid to the influence of the loading position. Based on the frequency domain solution of the modally decoupled equations of motion, a coefficient for a priori weighted superposition of modal von Mises stress fields is developed and validated on a simply supported cantilever beam structure with variable loading positions. The proposed approach is then applied to a simplified industrial model of a twist beam rear axle.

scholarly journals A Traveler’s Guide to the Multiverse: Promises, Pitfalls, and a Framework for the Evaluation of Analytic Decisions

2021 ◽  
Vol 4 (1) ◽  
pp. 251524592095492
Author(s):  
Marco Del Giudice ◽  
Steven W. Gangestad
Keyword(s):  
Degrees Of Freedom ◽  
A Priori ◽  
Simulated Data ◽  
Style Analysis ◽  
Data Set ◽  
Scant Attention ◽  
Equivalence Type ◽  
The Impact ◽  
Biased Estimates

Decisions made by researchers while analyzing data (e.g., how to measure variables, how to handle outliers) are sometimes arbitrary, without an objective justification for choosing one alternative over another. Multiverse-style methods (e.g., specification curve, vibration of effects) estimate an effect across an entire set of possible specifications to expose the impact of hidden degrees of freedom and/or obtain robust, less biased estimates of the effect of interest. However, if specifications are not truly arbitrary, multiverse-style analyses can produce misleading results, potentially hiding meaningful effects within a mass of poorly justified alternatives. So far, a key question has received scant attention: How does one decide whether alternatives are arbitrary? We offer a framework and conceptual tools for doing so. We discuss three kinds of a priori nonequivalence among alternatives—measurement nonequivalence, effect nonequivalence, and power/precision nonequivalence. The criteria we review lead to three decision scenarios: Type E decisions (principled equivalence), Type N decisions (principled nonequivalence), and Type U decisions (uncertainty). In uncertain scenarios, multiverse-style analysis should be conducted in a deliberately exploratory fashion. The framework is discussed with reference to published examples and illustrated with the help of a simulated data set. Our framework will help researchers reap the benefits of multiverse-style methods while avoiding their pitfalls.

Where is the body in the mental model for a story?

1997 ◽  
Vol 20 (1) ◽  
pp. 25-25 ◽  
Author(s):  
Arthur C. Graesser
Keyword(s):  
Mental Models ◽  
Mental Model ◽  
The Body ◽  
Discourse Processing ◽  
On Line

Researchers in the field of discourse processing have investigated how mental models are constructed when adults comprehend stories. They have explored the process of encoding various classes of inferences “on-line” when these mental microworlds are constructed during comprehension. This commentary addresses the extent to which these inferences and mental microworlds are “embodied.”

Estimation of the Thermodynamic Properties of Branched Hydrocarbons

2000 ◽  
Vol 122 (3) ◽  
pp. 147-152 ◽  
Author(s):  
Hui He ◽  
Mohamad Metghalchi ◽  
James C. Keck
Keyword(s):  
Thermodynamic Properties ◽  
Degrees Of Freedom ◽  
Statistical Thermodynamic ◽  
Motion Modes ◽  
Branched Alkanes ◽  
Branched Hydrocarbons ◽  
Wide Range ◽  
On Line ◽  
Kinetic Calculations ◽  
Good Agreement

A simple model has been developed to estimate the sensible thermodynamic properties such as Gibbs free energy, enthalpy, heat capacity, and entropy of hydrocarbons over a wide range of temperatures with special attention to the branched molecules. The model is based on statistical thermodynamic expressions incorporating translational, rotational and vibrational motions of the atoms. A method to determine the number of degrees of freedom for different motion modes (bending and torsion) has been established. Branched rotational groups, such as CH3 and OH, have been considered. A modification of the characteristic temperatures for different motion mode has been made which improves the agreement with the exact values for simple cases. The properties of branched alkanes up to 2,3,4,-trimthylpentane have been calculated and the results are in good agreement with the experimental data. A relatively small number of parameters are needed in this model to estimate the sensible thermodynamic properties of a wide range of species. The model may also be used to estimate the properties of molecules and their isomers, which have not been measured, and is simple enough to be easily programmed as a subroutine for on-line kinetic calculations. [S0195-0738(00)00902-X]

Design, Construction and Control of a Remotely Operated Vehicle (ROV)

2011 ◽  
Author(s):  
Alireza Marzbanrad ◽  
Jalil Sharafi ◽  
Mohammad Eghtesad ◽  
Reza Kamali
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Remotely Operated Vehicle ◽  
Six Degrees Of Freedom ◽  
Depth Sensors ◽  
Control Schemes ◽  
On Line ◽  
Operation Unit ◽  
And Control ◽  
Design Construction

This is report of design, construction and control of “Ariana-I”, an Underwater Remotely Operated Vehicle (ROV), built in Shiraz University Robotic Lab. This ROV is equipped with roll, pitch, heading, and depth sensors which provide sufficient feedback signals to give the system six degrees-of-freedom actuation. Although its center of gravity and center of buoyancy are positioned in such a way that Ariana-I ROV is self-stabilized, but the combinations of sensors and speed controlled drivers provide more stability of the system without the operator involvement. Video vision is provided for the system with Ethernet link to the operation unit. Control commands and sensor feedbacks are transferred on RS485 bus; video signal, water leakage alarm, and battery charging wires are provided on the same multi-core cable. While simple PI controllers would improve the pitch and roll stability of the system, various control schemes can be applied for heading to track different paths. The net weight of ROV out of water is about 130kg with frame dimensions of 130×100×65cm. Ariana-I ROV is designed such that it is possible to be equipped with different tools such as mechanical arms, thanks to microprocessor based control system provided with two directional high speed communication cables for on line vision and operation unit.

Efficient Simulation of Gear Contacts Including Transient Elastohydrodynamic Effects

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Peter Fietkau ◽  
Bernd Bertsche
Keyword(s):  
Three Dimensional ◽  
Direct Determination ◽  
Simulation Method ◽  
Elastic Half Space ◽  
Operating Conditions ◽  
Multibody Simulation ◽  
Multibody Model ◽  
Gear Contact ◽  
Oil Films ◽  
Lubrication Conditions

This paper describes an efficient transient elastohydrodynamic simulation method for gear contacts. The model uses oil films and elastic deformations directly in the multibody simulation, and is based on the Reynolds equation including squeeze and wedge terms as well as an elastic half-space. Two transient solutions to this problem, an analytical and a numerical one, were developed. The analytical solution is accomplished using assumptions for the gap shape and the pressure in the middle of the gap. The numerical problem is solved using multilevel multi-integration algorithms. With this approach, tooth impacts during gear rattling as well as highly loaded power-transmitting gear contacts can be investigated and lubrication conditions like gap heights or type of friction may be determined. The method was implemented in the multibody simulation environment SIMPACK. Therefore it is easy to transfer the developed element to other models and use it for a multitude of different engineering problems. A detailed three-dimensional elastic multibody model of an experimental transmission is used to validate the developed method. Important values of the gear contact like normal and tangential forces, proportion of dry friction, and minimum gap heights are calculated and studied for different conditions. In addition, pressure distributions on tooth flanks as well as gap forms are determined based on the numerical solution method. Finally, the simulation approach is validated with measurements and shows good consistency. The simulation model is therefore capable of predicting transient gear contact under different operating conditions such as load vibrations or gear rattling. Simulations of complete transmissions are possible and therefore a direct determination of transmission vibration behavior and structure-borne noise as well as of forces and lubrication conditions can be done.

Decentralized Fixed-Interval Smoothing Algorithms

1986 ◽  
Vol 108 (1) ◽  
pp. 86-89 ◽  
Author(s):  
Keigo Watanabe
Keyword(s):  
Computational Efficiency ◽  
A Priori ◽  
Superposition Principle ◽  
Fixed Interval ◽  
Central Processor ◽  
Decentralized Estimation ◽  
Information Filter

The Weineret-Desai smoother formula is applied to derive new decentralized fixed-interval smoothing algorithms for a decentralized estimation structure consisting of a central processor and of M local processors. Such algorithms are based on decentralizing the estimates of global backward information filter and obtained from the use of the superposition principle in scattering framework. The smoothing update problem is also investigated to illustrate the application of the proposed algorithms. The emphasis is on computational efficiency, independence of local a priori statistics, and flexibility of implementation.

Sign in / Sign up

Export Citation Format

Share Document