Design, Construction and Control of a Remotely Operated Vehicle (ROV)

2011 ◽  
Author(s):  
Alireza Marzbanrad ◽  
Jalil Sharafi ◽  
Mohammad Eghtesad ◽  
Reza Kamali
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Remotely Operated Vehicle ◽  
Six Degrees Of Freedom ◽  
Depth Sensors ◽  
Control Schemes ◽  
On Line ◽  
Operation Unit ◽  
And Control ◽  
Design Construction

This is report of design, construction and control of “Ariana-I”, an Underwater Remotely Operated Vehicle (ROV), built in Shiraz University Robotic Lab. This ROV is equipped with roll, pitch, heading, and depth sensors which provide sufficient feedback signals to give the system six degrees-of-freedom actuation. Although its center of gravity and center of buoyancy are positioned in such a way that Ariana-I ROV is self-stabilized, but the combinations of sensors and speed controlled drivers provide more stability of the system without the operator involvement. Video vision is provided for the system with Ethernet link to the operation unit. Control commands and sensor feedbacks are transferred on RS485 bus; video signal, water leakage alarm, and battery charging wires are provided on the same multi-core cable. While simple PI controllers would improve the pitch and roll stability of the system, various control schemes can be applied for heading to track different paths. The net weight of ROV out of water is about 130kg with frame dimensions of 130×100×65cm. Ariana-I ROV is designed such that it is possible to be equipped with different tools such as mechanical arms, thanks to microprocessor based control system provided with two directional high speed communication cables for on line vision and operation unit.

Development of a Special Inertial Measurement Unit for UAV Applications

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
Khaled S. Hatamleh ◽  
Ou Ma ◽  
Angel Flores-Abad ◽  
Pu Xie
Keyword(s):  
Degrees Of Freedom ◽  
Measurement Unit ◽  
Dynamics Modeling ◽  
Dynamics Model ◽  
Inertial Measurement ◽  
Six Degrees Of Freedom ◽  
On Line ◽  
Measurement Units ◽  
Sensor Models ◽  
And Control

Dynamics modeling is becoming more and more important in the development and control of unmanned aerial vehicles (UAV). An accurate model of a vehicle requires good knowledge of the dynamics properties and motion states, which are usually estimated with the help of integrated inertial measurement units (IMUs). This work develops a special six degrees of freedom IMU, which has the capability of measuring the angular accelerations. This paper introduces the design of the new IMU along with its sensor models and calibration procedures. The work introduces two experimental methods to verify the calibrated IMU readings. The IMU was designed to support an on-line methodology to estimate the parameters of UAV’s dynamics model that is currently being developed by the authors.

Control of processing at multi-tool two-support setup

2020 ◽  
pp. 67-73
Author(s):  
N.D. YUsubov ◽  
G.M. Abbasova
Keyword(s):  
Degrees Of Freedom ◽  
Factor Model ◽  
Angular Displacement ◽  
Factor Models ◽  
Technological System ◽  
Displacement Control ◽  
Model Accuracy ◽  
Six Degrees Of Freedom ◽  
Angular Displacements ◽  
And Control

The accuracy of two-tool machining on automatic lathes is analyzed. Full-factor models of distortions and scattering fields of the performed dimensions, taking into account the flexibility of the technological system on six degrees of freedom, i. e. angular displacements in the technological system, were used in the research. Possibilities of design and control of two-tool adjustment are considered. Keywords turning processing, cutting mode, two-tool setup, full-factor model, accuracy, angular displacement, control, calculation [email protected]

Demonstration of aircraft dynamic stability and response for aeronautical engineering students

1994 ◽  
Vol 98 (975) ◽  
pp. 192-193
Author(s):  
A.W. Bloy
Keyword(s):  
Dynamic Stability ◽  
Degrees Of Freedom ◽  
Engineering Students ◽  
Six Degrees Of Freedom ◽  
Stability And Control ◽  
Good Grasp ◽  
Aircraft Motion ◽  
Aeronautical Engineering ◽  
And Control ◽  
Aircraft Stability And Control

The teaching of aircraft stability and control at university usually progresses to the complexity of six degrees of freedom with a large array of aerodynamic, gravitational and inertial terms. It is therefore essential to ensure that students have a good grasp of fundamental dynamic characteristics such as damping and natural frequency, and any demonstration in which students observe aircraft motion is particularly helpful. At Manchester University this is achieved by a windtunnel demonstration of aircraft dynamic stability and response in pitch to a sinusoidal gust generator.

Modelling and Simulation of a Isoglide T3R1 Parallel Robot

2010 ◽  
Vol 166-167 ◽  
pp. 457-462
Author(s):  
Dan Verdes ◽  
Radu Balan ◽  
Máthé Koppány
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Practical Implementation ◽  
Medical Robots ◽  
The Past ◽  
And Control ◽  
Workspace Design ◽  
Human Systems

Parallel robots find many applications in human-systems interaction, medical robots, rehabilitation, exoskeletons, to name a few. These applications are characterized by many imperatives, with robust precision and dynamic workspace computation as the two ultimate ones. This paper presents kinematic analysis, workspace, design and control to 3 degrees of freedom (DOF) parallel robots. Parallel robots have received considerable attention from both researchers and manufacturers over the past years because of their potential for high stiffness, low inertia and high speed capability. Therefore, the 3 DOF translation parallel robots provide high potential and good prospects for their practical implementation in human-systems interaction.

The Integrated Mission Simulator

SIMULATION ◽  
1964 ◽  
Vol 2 (2) ◽  
pp. R-9-R-23
Author(s):  
Edward E. Markson ◽  
John L. Stricker
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Landing Site ◽  
Euler Angle ◽  
Space Mission ◽  
Six Degrees Of Freedom ◽  
Guidance And Control ◽  
Manned Space ◽  
And Control ◽  
Guidance Technique

Space mission simulator programs may be divided into two broad categories: (1) training tools (quali tative devices often simulating a continuous mission), and (2) laboratory tools (quantitative devices treating the mission in phases, each phase being programmed separately to obtain optimum scaling). This paper describes the development of an analog program capable of continuously simulating an entire lunar mission in six degrees of freedom with high resolu tion throughout. The reported work logically traces the program development through the equations of motion, the guidance and control equations, and the analog mechanization. The translation equations are de veloped using a modified form of Encke's method; two reference origins are utilized at the two points of primary interest—the landing site and the target vehicle—such that the displacements are approach ing a minimum in the regions where the highest reso lution is required. The variables are rescaled as this region is approached to obtain maximum accuracy. Relays, stepping switches and diode gates are used for rescaling and to re-reference origins. A particular Euler angle sequence is selected based on matrix validity criteria applied to the mission. A previously reported guidance technique is shown to be appli cable to all phases of the mission. It is concluded that the method demonstrated in this paper leads to minimum computer loading for simulating a manned space mission without program discontinuities. Supporting data include an analog- computed trajectory representative of a long-dura tion mission, which is compared in detail with a digital solution.

Design and Testing Outline for a Free Running Model of a High Speed Craft

2020 ◽  
Author(s):  
Xinguo Wang ◽  
Jack Bonoli ◽  
Madeline Cohen ◽  
Mirjam Fürth
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Six Degrees Of Freedom ◽  
High Interest ◽  
Outdoor Environments ◽  
Free Running ◽  
Industry Professionals ◽  
Design And Testing ◽  
Very High ◽  
Testing Plan

Hydrodynamics of High Speed Craft is a topic of very high interest for recreational boaters and industry professionals alike. This project aims to be a first step toward conducting such experiments in exposed outdoor environments. This paper will outline a preliminary design and testing plan of a free running model of a high speed craft. The proposed free running model will be subjected to all six degrees of freedom, self propelled, autonomously controlled, and will be exposed to weather elements.

Theory and Method of Dynamic Modeling for Multilayer Vibration Isolation System

2000 ◽  
Author(s):  
Liao Dao-Xun ◽  
Lu Yong-Zhong ◽  
Huang Xiao-Cheng
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Vibration Isolation ◽  
Rigid Bodies ◽  
Design Calculation ◽  
Isolation System ◽  
Dry Land ◽  
Vibration Isolation System ◽  
Six Degrees Of Freedom ◽  
Floating Raft

Abstract The multilayer vibration isolation system has been widely applied to isolate vibration in dynamic devices of ships, high-speed vehicles forging hammer and precise instruments. The paper is based on the coordinate transformation of space general motion for mass blocks (rigid bodies) and Lagrangian equation of multilayer vibration isolation system. It gives a strict mathematical derivation on the differential equation of the motion for the system with six degrees of freedom of relative motion between mass blocks (including base). The equations are different from the same kind of equations in the reference literatures. It can be used in the floating raft of ships in order to isolates vibration and decrease noise, also used in design calculation of the multilayer vibration isolation for dynamic machines and precise instruments on the dry land.

Multiscale Control to Meet the Conflicting Nanoscale Performance Requirements

2005 ◽  
Author(s):  
Huzefa Shakir ◽  
Won-Jong Kim
Keyword(s):  
Degrees Of Freedom ◽  
Reference Model ◽  
Control Strategies ◽  
Mass Model ◽  
Integral Term ◽  
Six Degrees Of Freedom ◽  
Performance Requirements ◽  
Model Following ◽  
Control Schemes ◽  
Domain Performance

In this paper, we consider the problem of designing a multiscale control for plants with conflicting time-domain performance requirements. These results follow from the conventional optimal proportional-integral (PI) control. Four different design methods are proposed: (1) a controller-switch technique which makes use of employing two different controllers designed to meet two different performances and are switched during the course of operation, (2) an integral-reset scheme, which resets the integral term in the control law when the new reference point is reached, (3) controller-switch and integral-reset schemes put together to take benefits of both of them, (4) a model-following approach that uses a dynamic reference model without increasing the overall dimension of the system. The objective of the last scheme is to make the output of the plant track the output of the model as closely as possible. Stability analyses and a comparison between the performances of these methods are given. All these methods give better performances as compared with conventional control schemes. Block diagrams are given and step responses are obtained to demonstrate the proposed methods. A six degrees-of-freedom (DOFs) magnetically levitated (maglev) stage with a second-order pure-mass model has been used to demonstrate the capabilities of the aforementioned control strategies. These strategies are not plant-specific and may be generalized to any higher-order plant.

Heading control of a novel finless high-speed supercavitating vehicle with an internal oscillating pendulum

2020 ◽  
pp. 107754632094834
Author(s):  
Mojtaba Mirzaei ◽  
Hossein Taghvaei
Keyword(s):  
High Speed ◽  
Degrees Of Freedom ◽  
Sliding Mode ◽  
Six Degrees Of Freedom ◽  
Supercavitating Vehicles ◽  
Supercavitating Vehicle ◽  
High Speeds ◽  
Heading Control ◽  
Heading Angle ◽  
Control Surfaces

High-speed supercavitating vehicles are surrounded by a huge cavity of gas and only a small portion of the nose and the tail of the vehicle are in contact with the water which leads to a considerable reduction in skin friction drag and reaching very high speeds. High-speed supercavitating vehicles are usually controlled by the cavitator at the nose which controls the pitch and depth of the vehicle and the control surfaces or fins which control the roll and heading angle of the vehicle using the bank-to-turn maneuvering method. However, control surfaces have disadvantages such as the high drag force and ineffectiveness due to the supercavity. Therefore, the purpose of the present study is to eliminate the fins from high-speed supercavitating vehicles and propose a new bank-to-turn heading control of this novel finless high-speed supercavitating vehicle which is composed of the cavitator at the nose and an oscillating pendulum as the internal actuator. Sliding mode control as a robust method is used for the six-degrees-of-freedom model of this finless high-speed vehicle against exposed disturbances. Some design criteria for the design of the internal pendulum in this finless supercavitating vehicle are presented for the damping coefficient, pendulum mass, and radius.

Sign in / Sign up

Export Citation Format

Share Document