Design of deployable mechanisms based on Wren parallel mechanism units

2021 ◽  
pp. 1-10
Author(s):  
Jieyu Wang ◽  
Xianwen Kong ◽  
Jingjun Yu
Keyword(s):  
Parallel Mechanism ◽  
Degree Of Freedom ◽  
Universal Joint ◽  
Planar Mechanisms ◽  
Movement Characteristics ◽  
Different Shapes

Abstract This paper presents a series of deployable mechanisms based on n-UU (universal joint) Wren parallel mechanism (PM) units, which undergo one degree-of-freedom (DOF) Borel-Bricard motion. First, the PM unit is developed into ortho-planar mechanisms by adopting an R-R joint. The link parameters of the mechanism are optimized to maximize the folding ratio while avoiding interference. Then, the optimized PM units are piled up to construct a novel 1-DOF multi-layer mechanism which has the largest folding ratio among similar structures in the literature. Moreover, polyhedral deployable mechanisms are obtained by connecting the PM unit using U joint or U-U joint. Apart from saving space, the polyhedral mechanisms can transform among different shapes of polyhedrons. Finally, variations of the n-UU PM are investigated with different shapes of platforms, and each mechanism has its unique movement characteristics.

An Omnidirectional Rolling 8U Parallel Mechanism

2012 ◽  
Vol 4 (3) ◽  
Author(s):  
Chang-huan Liu ◽  
Rui-ming Li ◽  
Yan-an Yao
Keyword(s):  
Stability Analysis ◽  
Parallel Mechanism ◽  
Simple Structure ◽  
Degree Of Freedom ◽  
Rolling Motion ◽  
Mobility Analysis ◽  
Universal Joint ◽  
Compact Structure ◽  
Loose Soil

A novel 8U (universal joint) parallel mechanism, being able to do omnidirectional rolling motion is proposed in this paper. This mobile mechanism owns the priority of simple structure and rolling easily on terrains with loose soil, dirt or sand with only a few actuations. Its spatial closed compact structure is described firstly. In addition, the omnidirectional locomotion accompanied with DOF (degree of freedom) alternation between one and two is revealed by mobility analysis. After that, the feasibility of rolling motion is verified theoretically by stability analysis. Finally, the omnidirectinoal rolling motion is testified both by virtual and prototype experiments.

KINEMATICS AND WORKSPACE ANALYSIS OF A 3 DEGREE OF FREEDOM PARALLEL MECHANISM WITH PARALLELOGRAM LINKAGE

2017 ◽  
Vol 41 (5) ◽  
pp. 922-935
Author(s):  
HongJun San ◽  
JunSong Lei ◽  
JiuPeng Chen ◽  
ZhengMing Xiao ◽  
JunJie Zhao
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Analytical Method ◽  
Theoretical Basis ◽  
Parallel Mechanism ◽  
Graphical Method ◽  
Degree Of Freedom ◽  
Workspace Analysis ◽  
Fixed Base ◽  
Moving Platform

In this paper, a 3-DOF translational parallel mechanism with parallelogram linkage was studied. According to the space vector relation between the moving platform and the fixed base, the direct and inverse position solutions of this mechanism was deduced through analytical method. In addition, the error of the algorithm was analyzed, and the algorithm had turned out to be effective and to have the satisfactory computational precision. On the above basis, the workspace of this mechanism was found through graphical method, which was compared with that of finding through Monte Carlo method, and there was the feasibility for analyzing the workspace of the mechanism by graphical method. The characteristic of the mechanism was analyzed by comparing the results of two analysis methods, which provided a theoretical basis for the application of the mechanism.

Parameter calibration of 6-degree-of-freedom parallel mechanism based on orthogonal displacement measuring system

Optik ◽  
2021 ◽  
Vol 226 ◽  
pp. 165806
Author(s):  
Yang Liwei ◽  
Fan Yanchao ◽  
Chai Fangmao ◽  
Pang Xinyuan ◽  
Dong deyi
Keyword(s):  
Parallel Mechanism ◽  
Degree Of Freedom ◽  
Measuring System ◽  
Parameter Calibration

Dynamics of a Two-DOF Parallel Pointing Mechanism

2005 ◽  
Author(s):  
Alessandro Cammarata ◽  
Rosario Sinatra
Keyword(s):  
Numerical Simulation ◽  
Parallel Mechanism ◽  
Inverse Dynamics ◽  
Kinematic Model ◽  
Degree Of Freedom ◽  
Numerical Examples ◽  
Proposed Model ◽  
Dynamic Analyses ◽  
Moving Platform ◽  
Two Degree Of Freedom

This paper presents kinematic and dynamic analyses of a two-degree-of-freedom pointing parallel mechanism. The mechanism consists of a moving platform, connected to a fixed platform by two legs of type PUS (prismatic-universal-spherical). At first a simplified kinematic model of the pointing mechanism is introduced. Based on this proposed model, the dynamics equations of the system using the Natural Orthogonal Complement method are developed. Numerical examples of the inverse dynamics results are presented by numerical simulation.

On the Seven Position Synthesis of a 5-SS Platform Linkage

1997 ◽  
Vol 123 (1) ◽  
pp. 74-79 ◽  
Author(s):  
Qizheng Liao ◽  
J. Michael McCarthy
Keyword(s):  
Rigid Body ◽  
Reference Point ◽  
Polynomial Solution ◽  
Degree Of Freedom ◽  
Prismatic Joint ◽  
Movement Characteristics ◽  
Position Synthesis ◽  
Freedom Movement

This paper builds on Innocenti’s polynomial solution for the 5-SS platform that generates a one-degree of freedom movement through seven specified spatial positions of a rigid body. We show that his 60×60 resultant can be reduced to one that is 10×10. We then actuate the linkage using a prismatic joint on the sixth leg and determine the trajectory of the reference point through the specified positions. The singularity submanifold of this associated 6-SS platform provides information about the movement characteristics of the 5-SS linkage.

Kinematic and Workspace Modelling of a 6-PUS Parallel Mechanism

2018 ◽  
Author(s):  
Jérôme Landuré ◽  
Clément Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Inverse Kinematic ◽  
Degree Of Freedom ◽  
Accurate Description ◽  
Transmission Ratio ◽  
Inverse Kinematic Problem ◽  
Jacobian Matrices ◽  
Six Degree Of Freedom

This article presents the kinematic analysis of a six-degree-of-freedom six-legged parallel mechanism of the 6-PUS architecture. The inverse kinematic problem is recalled and the Jacobian matrices are derived. Then, an algorithm for the geometric determination of the workspace is presented, which yields a very fast and accurate description of the workspace of the mechanism. Singular boundaries and a transmission ratio index are then introduced and studied for a set of architectural parameters. The proposed analysis yields conceptual architectures whose properties can be adjusted to fit given applications.

scholarly journals Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

2020 ◽  
Author(s):  
Chen Zhao ◽  
Jingke Song ◽  
Xuechan Chen ◽  
Ziming Chen ◽  
Huafeng Ding
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Universal Joint ◽  
Prismatic Joint ◽  
Transmission Index ◽  
Redundant Actuators ◽  
Force Transmissibility ◽  
Singular Configuration

Abstract This paper focuses on a 2R1T 3-UPU (U for universal joint and P for prismatic joint) parallel mechanism (PM) with two rotational and one translational (2R1T) degrees of freedom (DOFs) and the ability of multiple remote centers of motion (M-RCM). The singularity analysis based on the indexes of motion/force transmissibility and constraint shows that this PM has transmission singularity, constraint singularity, mixed singularity and limb singularity. To solve these singularproblems, the quantifiable redundancy transmission index (RTI) and the redundancy constraint index (RCI) are proposed for optimum seeking of redundant actuators for this PM. Then the appropriate redundant actuators are selected and the working scheme for redundant actuators near the corresponding singular configuration are given to help the PM go through the singularity.

scholarly journals Reconfiguration Analysis of a 3-DOF Parallel Mechanism

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 66
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Kinematic Chains ◽  
Constraint Equations ◽  
The Third ◽  
Equilateral Triangles ◽  
Moving Platform

This paper deals with the reconfiguration analysis of a 3-DOF (degrees-of-freedom) parallel manipulator (PM) which belongs to the cylindrical parallel mechanisms family. The PM is composed of a base and a moving platform shaped as equilateral triangles connected by three serial kinematic chains (legs). Two legs are composed of two universal (U) joints connected by a prismatic (P) joint. The third leg is composed of a revolute (R) joint connected to the base, a prismatic joint and universal joint in sequence. A set of constraint equations of the 1-RPU−2-UPU PM is derived and solved in terms of the Euler parameter quaternion (a.k.a. Euler-Rodrigues quaternion) representing the orientation of the moving platform and of the Cartesian coordinates of the reference point on the moving platform. It is found that the PM may undergo either the 3-DOF PPR or the 3-DOF planar operation mode only when the base and the moving platform are identical. The transition configuration between the operation modes is also identified.

Sign in / Sign up

Export Citation Format

Share Document