On the Seven Position Synthesis of a 5-SS Platform Linkage

1997 ◽  
Vol 123 (1) ◽  
pp. 74-79 ◽  
Author(s):  
Qizheng Liao ◽  
J. Michael McCarthy
Keyword(s):  
Rigid Body ◽  
Reference Point ◽  
Polynomial Solution ◽  
Degree Of Freedom ◽  
Prismatic Joint ◽  
Movement Characteristics ◽  
Position Synthesis ◽  
Freedom Movement

This paper builds on Innocenti’s polynomial solution for the 5-SS platform that generates a one-degree of freedom movement through seven specified spatial positions of a rigid body. We show that his 60×60 resultant can be reduced to one that is 10×10. We then actuate the linkage using a prismatic joint on the sixth leg and determine the trajectory of the reference point through the specified positions. The singularity submanifold of this associated 6-SS platform provides information about the movement characteristics of the 5-SS linkage.

Dimensional Synthesis of Planar Eight-Bar Linkages Based on a Parallel Robot With a Prismatic Base Joint

2013 ◽  
Author(s):  
Gim Song Soh ◽  
Fangtian Ying
Keyword(s):  
Rigid Body ◽  
Design Process ◽  
Parallel Robot ◽  
Degree Of Freedom ◽  
Dimensional Synthesis ◽  
End Effector ◽  
Prismatic Joint ◽  
Serial Chain ◽  
Different Types

This paper details the dimensional synthesis for the rigid body guidance of planar eight-bar linkages that could be driven by a prismatic joint at its base. We show how two RR cranks can be added to a planar parallel robot formed by a PRR and 3R serial chain to guide its end-effector through a set of five task poses. This procedure is useful for designers who require the choice of ground pivot locations. The results are eight different types of one-degree of freedom planar eight-bar linkages. We demonstrate the design process with the design of a multifunctional wheelchair that could transform its structure between a self-propelled wheelchair and a walking guide.

Four-Position Synthesis for Spatial Mechanisms With Two Independent Loops

1992 ◽  
Author(s):  
Chien H. Chiang ◽  
Wei Hua Chieng ◽  
David A. Hoeltzel
Keyword(s):  
Rigid Body ◽  
Mathematical Models ◽  
Analytical Methods ◽  
Degree Of Freedom ◽  
Single Degree Of Freedom ◽  
Practical Applications ◽  
Single Degree ◽  
Spatial Mechanisms ◽  
Position Synthesis ◽  
Independent Loops

Abstract Mathematical models that have been employed to synthesize spatial mechanisms for rigid body guidance have been found to be too complicated to implement in practical applications, especially for four-position guidance synthesis. This paper describes simple analytical methods for synthesizing single degree-of-freedom spatial mechanisms having two independent loops for four precision positions. In addition, prescribed timing has been simultaneously considered for several spatial mechanisms.

Kinematic Synthesis of Binary Actuated Mechanisms for Rigid Body Guidance

2000 ◽  
Author(s):  
Michael S. Hanchak ◽  
Andrew P. Murray
Keyword(s):  
Rigid Body ◽  
Design Space ◽  
Kinematic Synthesis ◽  
Prismatic Joint ◽  
Revolute Joints ◽  
Binary State ◽  
Parallel Arrangement ◽  
Position Problem ◽  
Position Synthesis ◽  
Kinematic Solution

Abstract This paper presents a method for designing mechanisms composed of Revolute-Binary state prismatic-Revolute (RBR) chains for rigid body guidance. Where a prismatic joint allows for any distance between two revolute joints, a binary state prismatic joint reaches two distances precisely. A single RBR chain can be designed to reach six positions. A parallel arrangement of three RBR chains can be assembled at the six positions but, in general, is not a viable kinematic solution. By requiring the arrangement of three RBR chains to share specific fixed and moving pivots, called an N-type arrangement, four positions are reachable. Further, the design space is quickly searchable for singularity-free solutions. Examples illustrate a solution to a four position synthesis problem and a ten position problem using a serial assembly of these mechanisms.

Seven-Position Synthesis of a Spatial Eight-Bar Linkage by Constraining a TRS Serial Chain

2009 ◽  
Author(s):  
Gim Song Soh ◽  
J. Michael McCarthy
Keyword(s):  
Degree Of Freedom ◽  
Upper Arm ◽  
End Effector ◽  
Serial Chain ◽  
Position Synthesis ◽  
Two Degree Of Freedom ◽  
Puma Robot

In this paper, we use seven-position synthesis to add four TS constraints to a TRS serial chain robot and obtain a two degree-of-freedom spatial eight-bar linkage. The TRS chain is an elbow manipulator, similar to a PUMA robot. We synthesize a TS dyad to connect the base of the robot to its forearm, and then we synthesize three TS dyads that connect the upper arm of the robot to its end-effector. The result is a two degree-of-freedom spatial eight-bar linkage that moves through seven prescribed positions. It consists of a TRST loop supporting a 3TS-RS platform, which we denote as a TS-TRS-3TS spatial linkage. We formulate and solve the design equations for the TS dyads, and analyze the resulting eight-bar linkage. An example demonstrates our results.

On the Motion of Lineal Bodies Subject to Linear Damping

1997 ◽  
Vol 64 (1) ◽  
pp. 227-229 ◽  
Author(s):  
M. F. Beatty
Keyword(s):  
Differential Equation ◽  
Dynamical Systems ◽  
Rigid Body ◽  
General Class ◽  
Plane Motion ◽  
Rigid Bodies ◽  
Degree Of Freedom ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Linear Damping

Wilms (1995) has considered the plane motion of three lineal rigid bodies subject to linear damping over their length. He shows that these plane single-degree-of-freedom systems are governed by precisely the same fundamental differential equation. It is not unusual that several dynamical systems may be formally characterized by the same differential equation, but the universal differential equation for these systems is unusual because it is exactly the same equation for the three very different systems. It is shown here that these problems belong to a more general class of problems for which the differential equation is exactly the same for every lineal rigid body regardless of its geometry.

Designing Planar Mechanisms Using a Bi-Invariant Metric in the Image Space of SO (3)

1994 ◽  
Author(s):  
Pierre Larochelle ◽  
J. Michael McCarthy
Keyword(s):  
Rigid Body ◽  
Numerical Results ◽  
Image Space ◽  
Dimensional Synthesis ◽  
Invariant Metric ◽  
Planar Mechanisms ◽  
Position And Orientation ◽  
Position Synthesis

Abstract In this paper we present a technique for using a bi-invariant metric in the image space of spherical displacements for designing planar mechanisms for n (> 5) position rigid body guidance. The goal is to perform the dimensional synthesis of the mechanism such that the distance between the position and orientation of the guided body to each of the n goal positions is minimized. Rather than measure these distances in the plane, we introduce an approximating sphere and identify rotations which are equivalent to the planar displacements to a specified tolerance. We then measure distances between the rigid body and the goal positions using a bi-invariant metric on the image space of SO(3). The optimal linkage is obtained by minimizing this distance over all of the n goal positions. The paper proceeds as follows. First, we approximate planar rigid body displacements with spherical displacements and show that the error induced by such an approximation is of order 1/R2, where R is the radius of the approximating sphere. Second, we use a bi-invariant metric in the image space of spherical displacements to synthesize an optimal spherical 4R mechanism. Finally, we identify the planar 4R mechanism associated with the optimal spherical solution. The result is a planar 4R mechanism that has been optimized for n position rigid body guidance using an approximate bi-invariant metric with an error dependent only upon the radius of the approximating sphere. Numerical results for ten position synthesis of a planar 4R mechanism are presented.

Daily Labor Supply and Adaptive Reference Points

2021 ◽  
Vol 111 (8) ◽  
pp. 2417-2443
Author(s):  
Neil Thakral ◽  
Linh T. Tô
Keyword(s):  
Labor Supply ◽  
Reference Point ◽  
Structural Model ◽  
Reference Points ◽  
Degree Of Freedom ◽  
Reference Dependence ◽  
Field Evidence ◽  
Dynamic View ◽  
Expected Earnings ◽  
Dependence Models

This paper provides field evidence on how reference points adjust, a degree of freedom in reference-dependence models. Examining this in the context of cabdrivers’ daily labor-supply behavior, we ask how the within-day timing of earnings affects decisions. Drivers work less in response to higher accumulated income, with a strong effect for recent earnings that gradually diminishes for earlier earnings. We estimate a structural model in which drivers work toward a reference point that adjusts to deviations from expected earnings with a lag. This dynamic view of reference dependence reconciles conflicting “neoclassical” and “behavioral” interpretations of evidence on daily labor-supply decisions. (JEL J22, J31, L94)

Sign in / Sign up

Export Citation Format

Share Document