Effect of Properties and Turgor Pressure on the Indentation Response of Plant Cells

2018 ◽  
Vol 85 (6) ◽  
Author(s):  
Viggo Tvergaard ◽  
Alan Needleman
Keyword(s):  
Cell Wall ◽  
Outer Layer ◽  
Loading Rate ◽  
Turgor Pressure ◽  
Plant Cells ◽  
Wall Material ◽  
Indentation Hardness ◽  
Viscoelastic Solid ◽  
Rapid Decay ◽  
Depth Response

The indentation of plant cells by a conical indenter is modeled. The cell wall is represented as a spherical shell consisting of a relatively stiff thin outer layer and a softer thicker inner layer. The state of the interior of the cell is idealized as a specified turgor pressure. Attention is restricted to axisymmetric deformations, and the wall material is characterized as a viscoelastic solid with different properties for the inner and outer layers. Finite deformation, quasi-static calculations are carried out. The effects of outer layer stiffness, outer layer thickness, turgor pressure, indenter sharpness, cell wall thickness, and loading rate on the indentation hardness are considered. The calculations indicate that the small indenter depth response is dominated by the cell wall material properties, whereas for a sufficiently large indenter depth, the value of the turgor pressure plays a major role. The indentation hardness is found to increase approximately linearly with a measure of indenter sharpness over the range considered. The value of the indentation hardness is affected by the rate of indentation, with a much more rapid decay of the hardness for slow loading, because there is more time for viscous relaxation during indentation.

scholarly journals Cell wall biosynthesis and the molecular mechanism of plant enlargement

2009 ◽  
Vol 36 (5) ◽  
pp. 383 ◽  
Author(s):  
John S. Boyer
Keyword(s):  
Cell Wall ◽  
Critical Level ◽  
Turgor Pressure ◽  
Chara Corallina ◽  
Wall Material ◽  
Primary Wall ◽  
Terrestrial Plants ◽  
Green Plants ◽  
Wall Deposition ◽  
Wall Growth

Recently discovered reactions allow the green alga Chara corallina (Klien ex. Willd., em. R.D.W.) to grow well without the benefit of xyloglucan or rhamnogalactan II in its cell wall. Growth rates are controlled by polygalacturonic acid (pectate) bound with calcium in the primary wall, and the reactions remove calcium from these bonds when new pectate is supplied. The removal appears to occur preferentially in bonds distorted by wall tension produced by the turgor pressure (P). The loss of calcium accelerates irreversible wall extension if P is above a critical level. The new pectate (now calcium pectate) then binds to the wall and decelerates wall extension, depositing new wall material on and within the old wall. Together, these reactions create a non-enzymatic but stoichiometric link between wall growth and wall deposition. In green plants, pectate is one of the most conserved components of the primary wall, and it is therefore proposed that the acceleration-deceleration-wall deposition reactions are of wide occurrence likely to underlie growth in virtually all green plants. C. corallina is one of the closest relatives of the progenitors of terrestrial plants, and this review focuses on the pectate reactions and how they may fit existing theories of plant growth.

scholarly journals Structure and Biomechanics during Xylem Vessel Transdifferentiation in Arabidopsis thaliana

Plants ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1715
Author(s):  
Eleftheria Roumeli ◽  
Leah Ginsberg ◽  
Robin McDonald ◽  
Giada Spigolon ◽  
Rodinde Hendrickx ◽  
...  
Keyword(s):  
Arabidopsis Thaliana ◽  
Cell Wall ◽  
Cell Walls ◽  
Turgor Pressure ◽  
Plant Cells ◽  
Building Blocks ◽  
Xylem Vessel ◽  
Primary Cell Wall ◽  
Individual Plant ◽  
Vessel Elements

Individual plant cells are the building blocks for all plantae and artificially constructed plant biomaterials, like biocomposites. Secondary cell walls (SCWs) are a key component for mediating mechanical strength and stiffness in both living vascular plants and biocomposite materials. In this paper, we study the structure and biomechanics of cultured plant cells during the cellular developmental stages associated with SCW formation. We use a model culture system that induces transdifferentiation of Arabidopsis thaliana cells to xylem vessel elements, upon treatment with dexamethasone (DEX). We group the transdifferentiation process into three distinct stages, based on morphological observations of the cell walls. The first stage includes cells with only a primary cell wall (PCW), the second covers cells that have formed a SCW, and the third stage includes cells with a ruptured tonoplast and partially or fully degraded PCW. We adopt a multi-scale approach to study the mechanical properties of cells in these three stages. We perform large-scale indentations with a micro-compression system in three different osmotic conditions. Atomic force microscopy (AFM) nanoscale indentations in water allow us to isolate the cell wall response. We propose a spring-based model to deconvolve the competing stiffness contributions from turgor pressure, PCW, SCW and cytoplasm in the stiffness of differentiating cells. Prior to triggering differentiation, cells in hypotonic pressure conditions are significantly stiffer than cells in isotonic or hypertonic conditions, highlighting the dominant role of turgor pressure. Plasmolyzed cells with a SCW reach similar levels of stiffness as cells with maximum turgor pressure. The stiffness of the PCW in all of these conditions is lower than the stiffness of the fully-formed SCW. Our results provide the first experimental characterization of the mechanics of SCW formation at single cell level.

scholarly journals Ultrastructural plasma membrane asymmetries in tension and curvature promote yeast cell fusion

2021 ◽  
Author(s):  
Olivia Muriel ◽  
Laetitia Michon ◽  
Wanda Kukulski ◽  
Sophie G Martin
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Sexual Reproduction ◽  
Membrane Fusion ◽  
Cell Fusion ◽  
Turgor Pressure ◽  
Wall Material ◽  
M Cells ◽  
P Cells ◽  
Cell Cell

Cell-cell fusion is central to the process of fertilization for sexual reproduction. This necessitates the remodeling of peri-cellular matrix or cell wall material and the merging of plasma membranes. In walled fission yeast S. pombe, the fusion of P and M cells during sexual reproduction relies on the fusion focus, an actin structure that concentrates glucanase-containing secretory vesicles for local cell wall digestion necessary for membrane fusion. Here, we present a correlative light and electron microscopy (CLEM) quantitative study of a large dataset of 3D tomograms of the fusion site, which revealed the ultrastructure of the fusion focus as an actin-containing, vesicle-dense structure excluding other organelles. Unexpectedly, the data revealed asymmetries between the two gametes: M-cells exhibit a taut and convex plasma membrane that progressively protrudes into P-cells, which exhibit a more slack, wavy plasma membrane. These asymmetries are relaxed upon plasma membrane fusion, with observations of ramified pores that may result from multiple initiations or inhomogeneous expansion. We show that P-cells have a higher exo- to endocytosis ratio than M-cells, and that local reduction in exocytosis abrogates membrane waviness and compromises cell fusion significantly more in P- than M-cells. Reciprocally, reduction of turgor pressure specifically in M-cells prevents their protrusions into P-cells and delays cell fusion. Thus, asymmetric membrane conformations, which result from differential turgor pressure and exocytosis/endocytosis ratios between mating types, favor cell-cell fusion.

Role of Golgi Apparatus in the Formation of Plant Slimes, Cuticles and Extraneous Wall Material

1974 ◽  
Vol 32 ◽  
pp. 86-87
Author(s):  
Hilton H. Mollenhauer
Keyword(s):  
Cell Wall ◽  
Golgi Apparatus ◽  
Cell Walls ◽  
Growth And Development ◽  
Characteristic Property ◽  
Plant Cells ◽  
Plant Biology ◽  
Wall Material ◽  
Wall Properties

Cell walls are fundamentally involved in many aspects of plant biology including the morphology, growth, and development of plant cells and the interactions between plant hosts and their pathogens. Intuitively, one can recognize that these wall properties result from the sum total of the various components of which the wall is composed and that there are classes of substances each of which impart a characteristic property to the cell wall.

Cell wall structures of Epicoccum nigrum (Hyphomycetes)

1973 ◽  
Vol 51 (5) ◽  
pp. 1071-1073 ◽  
Author(s):  
J. A. Brushaber ◽  
R. H. Haskins
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Outer Layer ◽  
Secondary Wall ◽  
Outer Wall ◽  
Wall Layer ◽  
Wall Material ◽  
Primary Wall ◽  
Electron Dense Material ◽  
Wall Structures

Two structurally distinct types of secondary wall layers are present in older hyphae in addition to the primary wall. A coarsely fibrous outer wall layer often becomes quite massive and frequently fuses with the outer wall layers of adjacent cells in the formation of hyphal strands. The uneven deposition of this outer layer often produces large verrucosities. The inner secondary wall layer is relatively electron transparent and contains a reticulum of electron-dense lines. The interface of the inner secondary wall with the cytoplasm is often very irregular, and sections of the plasma membrane are frequently overlain by wall material. The outer secondary wall of conidia is composed of an electron-dense material different from that of the outer wall of hyphae. Cells in the multicellular conidia tend to be polyhedral in shape with either very thick primary walls or thin primary walls having a thick inner wall deposit.

scholarly journals A Microrobotic System for Simultaneous Measurement of Turgor Pressure and Cell-Wall Elasticity of Individual Growing Plant Cells

2019 ◽  
Vol 4 (2) ◽  
pp. 641-646 ◽  
Author(s):  
Jan T. Burri ◽  
Hannes Vogler ◽  
Gautam Munglani ◽  
Nino F. Laubli ◽  
Ueli Grossniklaus ◽  
...  
Keyword(s):  
Cell Wall ◽  
Simultaneous Measurement ◽  
Turgor Pressure ◽  
Plant Cells ◽  
Cell Wall Elasticity

scholarly journals Pectin homogalacturonan nanofilament expansion drives morphogenesis in plant epidermal cells

Science ◽  
2020 ◽  
Vol 367 (6481) ◽  
pp. 1003-1007 ◽  
Author(s):  
Kalina T. Haas ◽  
Raymond Wightman ◽  
Elliot M. Meyerowitz ◽  
Alexis Peaucelle
Keyword(s):  
Cell Wall ◽  
Plant Cell ◽  
Cell Shape ◽  
Plant Cell Wall ◽  
Growth Models ◽  
Turgor Pressure ◽  
Plant Cells ◽  
Active Participant ◽  
Chemically Induced ◽  
Expansion Capacity

The process by which plant cells expand and gain shape has presented a challenge for researchers. Current models propose that these processes are driven by turgor pressure acting on the cell wall. Using nanoimaging, we show that the cell wall contains pectin nanofilaments that possess an intrinsic expansion capacity. Additionally, we use growth models containing such structures to show that a complex plant cell shape can derive from chemically induced local and polarized expansion of the pectin nanofilaments without turgor-driven growth. Thus, the plant cell wall, outside of the cell itself, is an active participant in shaping plant cells. Extracellular matrix function may similarly guide cell shape in other kingdoms, including Animalia.

Multivesicular structures and cell wall growth

1969 ◽  
Vol 47 (12) ◽  
pp. 1873-1877 ◽  
Author(s):  
L. C. Fowke ◽  
George Setterfield
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Physiological State ◽  
Plant Cells ◽  
Wall Material ◽  
Golgi Bodies ◽  
Wall Growth ◽  
Cell Wall Deposition ◽  
Applied Auxin ◽  
In Cells

Applied auxin caused cells of artichoke tuber slices to expand and deposit significant amounts of new wall material while cells in slices held on water remained essentially inert in both respects. Cells in all physiological treatments showed multivesicular structures at the plasma membrane (plasmalemmasomes, lomasomes), within the cytoplasm and within the central vacuoles. The number of plasmalemmasomes was considerably greater in cells not depositing wall than in cells treated with auxin to stimulate wall synthesis. Multivesicular structures showed no relation to Golgi bodies, which increase in number and apparent activity in response to auxin treatment. It is concluded that plasmalemmasomes are not involved in cell wall deposition. Multivesicular structures in plant cells could have several origins and it is suggested that some may represent artifactual reorganization of plasmalemma and tonoplast membranes during cytological processing. Such reorganization would presumably be sensitive to the physiological state of the tissue.

scholarly journals Cytoskeletal organization in isolated plant cells under geometry control

2019 ◽  
Author(s):  
P. Durand-Smet ◽  
Tamsin A. Spelman ◽  
E. M. Meyerowitz ◽  
H. Jönsson
Keyword(s):  
Cell Wall ◽  
Plant Cell ◽  
Cell Shape ◽  
Plant Cells ◽  
Wall Material ◽  
Specific Cell ◽  
Microtubule Network ◽  
Living Plant ◽  
Cytoskeletal Organization ◽  
In Cells

AbstractSpecific cell and tissue form is essential to support many biological functions of living organisms. During development, the creation of different shapes at the cellular and tissue level fundamentally requires the integration of genetic, biochemical and physical inputs.It is well established that the cortical microtubule network plays a key role in the morphogenesis of the plant cell wall by guiding the organisation of new cell wall material. Moreover, it has been suggested that light or mechanical stresses can orient the microtubules thereby controlling wall architecture and plant cell shape. The cytoskeleton is thus a major determinant of plant cell shape. What is less clear is how cell shape in turn influences cytoskeletal organization.Recent in vitro experiments and numerical simulations predicted that a geometry-based rule is sufficient to explain some of the microtubule organization observed in cells. Due to their high flexural rigidity and persistence length of the order of a few millimeters, MTs are rigid over cellular dimensions and are thus expected to align along their long axis if constrained in specific geometries. This hypothesis remains to be tested in cellulo.Here we present an experimental approach to explore the relative contribution of geometry to the final organization of actin and microtubule cytoskeletons in single plant cells. We show that, in cells constrained in rectangular shapes, the cytoskeleton align along the long axis of the cells. By studying actin and microtubules in cells with the same system we show that while actin organisation requires microtubules to be present to align the converse is not the case. A model of self organizing microtubules in 3D predicts that severing of microtubules is an important parameter controlling the anisotropy of the microtubule network. We experimentally confirmed the model predictions by analysing the response to shape change in plant cells with altered microtubule severing dynamics. This work is a first step towards assessing quantitatively how cell geometry contributes to the control of cytoskeletal organization in living plant cells.

scholarly journals RADIOAUTOGRAPHIC STUDY OF CELL WALL DEPOSITION IN GROWING PLANT CELLS

1967 ◽  
Vol 35 (3) ◽  
pp. 659-674 ◽  
Author(s):  
Peter M. Ray
Keyword(s):  
Cell Wall ◽  
Indoleacetic Acid ◽  
Plant Cells ◽  
Outer Wall ◽  
Wall Material ◽  
Wall Structure ◽  
Cell Wall Material ◽  
Expansion Process ◽  
Cell Wall Deposition ◽  
Cell Wall Expansion

Segments cut from growing oat coleoptiles and pea stems were fed glucose-3H in presence and absence of the growth hormone indoleacetic acid (IAA). By means of electron microscope radioautography it was demonstrated that new cell wall material is deposited both at the wall surface (apposition) and within the preexisting wall structure (internally). Quantitative profiles for the distribution of incorporation with position through the thickness of the wall were obtained for the thick outer wall of epidermal cells. With both oat coleoptile and pea stem epidermal outer walls, it was found that a larger proportion of the newly synthesized wall material appeared to become incorporated within the wall in the presence of IAA. Extraction experiments on coleoptile tissue showed that activity that had been incorporated into the cell wall interior represented noncellulosic constituents, mainly hemicelluloses, whereas cellulose was deposited largely or entirely by apposition. It seems possible that internal incorporation of hemicelluloses plays a role in the cell wall expansion process that is involved in cell growth.

Sign in / Sign up

Export Citation Format

Share Document