scholarly journals Synthesis of a Novel Filtrate Reducer and Its Application in Water-Based Drilling Fluid for Ultra-High-Temperature Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Dongyu Qiao ◽  
Zhongbin Ye ◽  
Lei Tang ◽  
Yiping Zheng ◽  
Xindong Wang ◽  
...  
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Adsorption Capacity ◽  
Fresh Water ◽  
Drilling Fluid ◽  
Salt Resistance ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Water Based ◽  
Water Base

The high-temperature stability and filtration property controlling of ultra-high-temperature water-based drilling fluids is a worldwide problem. To resolve this problem, a high-temperature-resistant quaternary copolymer (HTRTP) was synthesized based on molecular structure optimization design and monomer optimization. The physical and chemical properties were characterized by infrared spectroscopy, thermal weight, and spectrophotometry, and their temperature and salt resistance was evaluated in different drilling fluids, combined with adsorption, particle size analysis, and stability test. The results show that the thermal stability of HTRTP is very strong, and the initial temperature of thermal decomposition is above 320°C. The salt resistance of HTRTP is more than 162 g/L, and the calcium resistance is more than 5000 mg/L, which is equivalent to the foreign temperature-resistant polymer DCL-a, and is superior to the domestic metal ion viscosity increasing fluid loss agent PMHA-II for drilling fluids. It has excellent high-temperature resistance (245°C) and fluid loss reduction effect in fresh water base mud, fresh water weighted base mud, saturated brine base mud, and composite salt water base mud, which is better than foreign DCL-a (245°C) and domestic PMHA (220°C). The adsorption capacity of HTRTP on clay particles is large and firm, and the adsorption capacity changes little under the change of chemical environment and temperature. Both before and after HTRTP aging (245°C/16 h), the permeability of filter cake can be significantly reduced and its compressibility can be improved. By optimizing the particle size gradation of the drilling fluid and enhancing the colloid stability of the system, HTRTP can improve the filtration building capacity of the drilling fluid and reduce the filtration volume. The development of antithermal polymer provides a key treatment agent for the study of anti-high-temperature-resistant saline-based drilling fluid.

Rheology and fluid loss of a polyacrylamide-based micro-gel particles in a water-based drilling fluid

2020 ◽  
Vol 10 (5) ◽  
pp. 657-662
Author(s):  
Gang Wang ◽  
Honghai Fan ◽  
Guancheng Jiang ◽  
Wanjun Li ◽  
Yu Ye ◽  
...  
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Drilling Fluid ◽  
Crosslinking Agent ◽  
Fluid Loss ◽  
Temperature Property ◽  
Water Based ◽  
The Cross

In this paper, the cross-linked micro-gel polymer between acrylamide (AM) and N, N-Methylenebisacrylamide (MBA) was synthesized by dispersion polymerization. The initiator and crosslinking agent concentration were used to control the particle size of micro-gel polymer. The filtration property and mechanism of micro-gel were investigated comprehensively. The characteristics of micro-gel were checked by means of Fourier transform infrared spectroscopy, thermogravimetry, transmission electron microscopy, and particle size distribution, respectively. The results indicated that the cross-linked micro-gel polymer exhibited several outstanding merits, such as thermal stability (up to 200 °C), filtration control and rheological property. Microstructure analysis and particle size distribution examinations showed that the scale of micro-gel polymer was micro, which is in accord with design. Rheological tests demonstrated that the nonlinear structure of micro-gel polymer showed less impact on the apparent viscosity. The anti-high temperature property of micro-gel polymer was better than poly anioniccellulose (PAC) and asphalt widely applied in drilling fluid for anti-high temperature fluid-loss additive. As a result, the cross-linked micro-gel polymer had great potential to be applied in high temperature water-based mud.

A Study on the Effects of Date Pit-Based Additive on the Performance of Water-Based Drilling Fluid

2017 ◽  
Vol 140 (5) ◽  
Author(s):  
Jimoh K. Adewole ◽  
Musa O. Najimu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Date Seed ◽  
Water Based ◽  
Filtration Properties ◽  
Loss Control

This study investigates the effect of using date seed-based additive on the performance of water-based drilling fluids (WBDFs). Specifically, the effects of date pit (DP) fat content, particle size, and DP loading on the drilling fluids density, rheological properties, filtration properties, and thermal stability were investigated. The results showed that dispersion of particles less than 75 μm DP into the WBDFs enhanced the rheological as well as fluid loss control properties. Optimum fluid loss and filter cake thickness can be achieved by addition of 15–20 wt % DP loading to drilling fluid formulation.

scholarly journals Experimental Investigation of the Rheological Behavior of an Oil-Based Drilling Fluid with Rheology Modifier and Oil Wetter Additives

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 4877
Author(s):  
Mobeen Murtaza ◽  
Sulaiman A. Alarifi ◽  
Muhammad Shahzad Kamal ◽  
Sagheer A. Onaizi ◽  
Mohammed Al-Ajmi ◽  
...  
Keyword(s):  
High Temperature ◽  
Zeta Potential ◽  
Hot Rolling ◽  
Emulsion Stability ◽  
Drilling Fluid ◽  
Temperature Tolerance ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Before And After ◽  
Rheology Modifier

Drilling issues such as shale hydration, high-temperature tolerance, torque and drag are often resolved by applying an appropriate drilling fluid formulation. Oil-based drilling fluid (OBDF) formulations are usually composed of emulsifiers, lime, brine, viscosifier, fluid loss controller and weighting agent. These additives sometimes outperform in extended exposure to high pressure high temperature (HPHT) conditions encountered in deep wells, resulting in weighting material segregation, high fluid loss, poor rheology and poor emulsion stability. In this study, two additives, oil wetter and rheology modifier were incorporated into the OBDF and their performance was investigated by conducting rheology, fluid loss, zeta potential and emulsion stability tests before and after hot rolling at 16 h and 32 h. Extending the hot rolling period beyond what is commonly used in this type of experiment is necessary to ensure the fluid’s stability. It was found that HPHT hot rolling affected the properties of drilling fluids by decreasing the rheology parameters and emulsion stability with the increase in the hot rolling time to 32 h. Also, the fluid loss additive’s performance degraded as rolling temperature and time increased. Adding oil wetter and rheology modifier additives resulted in a slight loss of rheological profile after 32 h and maintained flat rheology profile. The emulsion stability was slightly decreased and stayed close to the recommended value (400 V). The fluid loss was controlled by optimizing the concentration of fluid loss additive and oil wetter. The presence of oil wetter improved the carrying capacity of drilling fluids and prevented the barite sag problem. The zeta potential test confirmed that the oil wetter converted the surface of barite from water to oil and improved its dispersion in the oil.

scholarly journals Experimental study on thermal, rheological and filtration control characteristics of drilling fluids: effect of nanoadditives

2020 ◽  
Vol 75 ◽  
pp. 36
Author(s):  
Erfan Veisi ◽  
Mastaneh Hajipour ◽  
Ebrahim Biniaz Delijani
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Drilling Fluid ◽  
Formation Damage ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Drill Bit ◽  
Rheological Characteristics ◽  
Cu Nanoparticles ◽  
Water Based

Cooling the drill bit is one of the major functions of drilling fluids, especially in high temperature deep drilling operations. Designing stable drilling fluids with proper thermal properties is a great challenge. Identifying appropriate additives for the drilling fluid can mitigate drill-bit erosion or deformation caused by induced thermal stress. The unique advantages of nanoparticles may enhance thermal characteristics of drilling fluids. The impacts of nanoparticles on the specific heat capacity, thermal conductivity, rheological, and filtration control characteristics of water‐based drilling fluids were experimentally investigated and compared in this study. Al2O3, CuO, and Cu nanoparticles were used to prepare the water-based drilling nanofluid samples with various concentrations, using the two-step method. Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) were utilized to study the nanoparticle samples. The nanofluids stability and particle size distribution were, furthermore, examined using Dynamic Light Scattering (DLS). The experimental results indicated that thermal and rheological characteristics are enhanced in the presence of nanoparticles. The best enhancement in drilling fluid heat capacity and thermal conductivity was obtained as 15.6% and 12%, respectively by adding 0.9 wt% Cu nanoparticles. Furthermore, significant improvement was observed in the rheological characteristics such as the apparent and plastic viscosities, yield point, and gel strength of the drilling nanofluids compared to the base drilling fluid. Addition of nanoparticles resulted in reduced fluid loss and formation damage. The permeability of filter cakes decreased with increasing the nanoparticles concentration, but no significant effect in filter cake thickness was observed. The results reveal that the application of nanoparticles may reduce drill-bit replacement costs by improving the thermal and drilling fluid rheological characteristics and decrease the formation damage due to mud filtrate invasion.

scholarly journals Laponite: a promising nanomaterial to formulate high-performance water-based drilling fluids

2020 ◽  
Author(s):  
Xian-Bin Huang ◽  
Jin-Sheng Sun ◽  
Yi Huang ◽  
Bang-Chuan Yan ◽  
Xiao-Dong Dong ◽  
...  
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Nitrogen Adsorption ◽  
Drill String ◽  
Wellbore Stability ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Mechanism Analysis ◽  
Water Based ◽  
Inhibition Performance

Abstract High-performance water-based drilling fluids (HPWBFs) are essential to wellbore stability in shale gas exploration and development. Laponite is a synthetic hectorite clay composed of disk-shaped nanoparticles. This paper analyzed the application potential of laponite in HPWBFs by evaluating its shale inhibition, plugging and lubrication performances. Shale inhibition performance was studied by linear swelling test and shale recovery test. Plugging performance was analyzed by nitrogen adsorption experiment and scanning electron microscope (SEM) observation. Extreme pressure lubricity test was used to evaluate the lubrication property. Experimental results show that laponite has good shale inhibition property, which is better than commonly used shale inhibitors, such as polyamine and KCl. Laponite can effectively plug shale pores. It considerably decreases the surface area and pore volume of shale, and SEM results show that it can reduce the porosity of shale and form a seamless nanofilm. Laponite is beneficial to increase lubricating property of drilling fluid by enhancing the drill pipes/wellbore interface smoothness and isolating the direct contact between wellbore and drill string. Besides, laponite can reduce the fluid loss volume. According to mechanism analysis, the good performance of laponite nanoparticles is mainly attributed to the disk-like nanostructure and the charged surfaces.

scholarly journals Effect of Cycloaliphatic Amine on the Shale Inhibitive Properties of Water-Based Drilling Fluid

2015 ◽  
Vol 8 (1) ◽  
pp. 19-27 ◽  
Author(s):  
Hanyi Zhong ◽  
Dong Sun ◽  
Weian Huang ◽  
Yunfeng Liu ◽  
Zhengsong Qiu
Keyword(s):  
High Temperature ◽  
Drilling Fluid ◽  
Hardness Test ◽  
Drilling Fluids ◽  
The Novel ◽  
Potential Measurement ◽  
Clay Particles ◽  
Water Based ◽  
Bulk Hardness ◽  
Dispersion Test

In order to improve the inhibitive properties and high temperature resistance of shale inhibitor, cycloaliphatic amines were introduced as shale hydration inhibitors in water-based drilling fluids. Bulk hardness test, shale cuttings dispersion test, bentonite inhibition test and water adsorption test were carried out to characterize the inhibitive properties of the novel amines. Surface tension measurement, zeta potential measurement, XRD, contact angle test, SEM and TGA were performed to investigate the interaction between the cycloaliphatic amines and clay particles. The results indicated that cycloaliphatic amines exhibited superior inhibitive properties to the state of the art inhibitors. Moreover, the amines were high temperature resistant. The hydrophobic amine could intercalate into the clay gallery with monolayer orientation. The protonated ammonium ions neutralized the negatively charged surface. After adsorption, the hydrophobic segment covered the clay surface and provided a shell preventing the ingress of water.

Sign in / Sign up

Export Citation Format

Share Document