scholarly journals Optimization of Trailing-Edge Serrations to Reduce Open-Rotor Tonal Interaction Noise

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Robert Jaron ◽  
Antoine Moreau ◽  
Sébastien Guérin ◽  
Rainer Schnell
Keyword(s):  
Steady State ◽  
Noise Reduction ◽  
Hybrid Approach ◽  
Prediction Method ◽  
Rotor Blades ◽  
Spanwise Direction ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Open Rotor ◽  
Trailing Edge Serrations

A major source of contra-rotating open rotor (CROR) tonal noise is caused by the interaction of the front-rotor (FR) wakes with the aft-rotor blades. Inspired by chevron nozzles, which increase the mixing process in jet shear layers, serrations are implemented at the FR trailing-edge in order to increase the wake mixing and thus reduce the tones. The depth and width of the serrations are optimized with a multi-objective, metamodel-assisted evolutionary algorithm. For each member, a steady-state Reynolds-averaged Navier–Stokes (RANS) simulation is performed, which is coupled with an analytical noise prediction method in order to evaluate the noise reduction due to the serrations. The results confirm that tonal interaction noise can be reduced by means of trailing-edge serrations. It is found that the major noise reduction mechanism for wake interaction is attributed to increased destructive interferences occurring in spanwise direction. The tonal noise generated through the interaction of the rear rotor (RR) potential field with the FR trailing edge is also slightly reduced because of the circumferential and axial shift of the serrated trailing edge. Furthermore, the present study demonstrates the feasibility of performing an acoustic optimization with a hybrid approach that predicts the noise analytically and extracts the aerodynamic input data from a steady-state RANS flow solution.

Experimental study of wavy trailing edge serrations on flat rotor blades

2021 ◽  
Vol 263 (5) ◽  
pp. 1855-1866
Author(s):  
Sai Manikanta Kaja ◽  
K. Sriinivasan ◽  
A. Jaswanth Kalyan Kumar
Keyword(s):  
Experimental Study ◽  
Noise Reduction ◽  
Pitch Angle ◽  
Acoustic Emissions ◽  
Broadband Noise ◽  
Rotor Blades ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Low Speeds ◽  
Trailing Edge Serrations

A detailed experimental study is conducted to observe the effect of various parameters like wavelength, depth of serrations, and pitch angle on serrated blades' acoustic emissions at low speeds up to 2000 rpm. Experiments are conducted on flat blade rotors with sinusoidal serrations on the trailing edge of blades with different amplitudes and wavelengths. A total of 7 blades with different serration configurations, including a base configuration, are studied, five of them have serrations throughout the span of the blade, and one configuration has serration of varying amplitude on the farther half of the blade. It is observed that some blade configurations have resulted in tonal noise reduction noise as much as 8dB, whereas some of the serration configurations reduce very little to none, there is no significant effect of T.E serrations on the broadband noise emitted by the rotor. Directivity of noise generated from the rotor, the effect of serrations on the directivity of the noise is studied.

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

2021 ◽  
pp. 095441002098822
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Lei Wang ◽  
Fujia Hu ◽  
Guang Xi
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Numerical Study ◽  
Barn Owl ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Trailing Edge ◽  
Reduction Mechanisms ◽  
Trailing Edge Serrations ◽  
Bionic Airfoil

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

scholarly journals Aerofoil self-noise radiations subjected to serration flap angles

2021 ◽  
Vol 62 (7) ◽  
Author(s):  
P. C. Woodhead ◽  
T. P. Chong ◽  
P. F. Joseph ◽  
A. Vathylakis
Keyword(s):  
Noise Reduction ◽  
Flat Plate ◽  
High Frequency ◽  
Cross Flow ◽  
Broadband Noise ◽  
The Self ◽  
Spanwise Direction ◽  
Trailing Edge ◽  
Blade Loading ◽  
Loading Effect

Abstract Besides the investigation of the aeroacoustics responses of an asymmetric aerofoil subjected to serrated trailing edge flap angles from negative (flap-down) to positive (flap-up), this paper also provides a new perspective on the physical mechanisms of broadband noise reduction by a serrated trailing edge. The blade-loading effect, which is a function of the length and flap angle for a straight/non-serrated trailing edge flat plate, plays a considerable role in the self-noise radiation that is hitherto less recognised. When the same trailing edge flat plate is cut into a sawtooth serration shape, the self-noise reduction will be underpinned simultaneously by both the serration effect (dominant) and the blade-loading effect. The results demonstrate that the far-field radiation of a serrated aerofoil can be manipulated significantly depending on the direction of the flap angle. In the flap-down configuration, the blade-loading will become a negative factor that causes a deterioration of the noise reduction performance across the entire frequency range. In the flap-up configuration, three spectral frequencies zones can be defined. At the low-frequency zone, the diminished cross-flow at the sawtooth gaps will impede the noise reduction capability. At the central-frequency zone, the re-distribution of the turbulence sources and reduction in the turbulence spanwise length scales will enhance the noise reduction performance. Improvement in the noise performance can also be achieved at the high-frequency zone owing to the lack of interaction between the cross-flow and sawtooth structure. A new concept is positively demonstrated by varying the serration flap angle as a periodic function across the spanwise direction (spanwise wavy serration). When compared to a non-flap serrated trailing edge, the spanwise wavy serration is found to further increase the noise reduction level between the central and high-frequency regions. Graphic abstract

Sign in / Sign up

Export Citation Format

Share Document