Power Plant Output Augmentation by Evaporative Cooling Based on HRSG Blowdown Water Recycling in the Kingdom of Saudi Arabia: A Novel Approach

2017 ◽  
Vol 139 (11) ◽  
Author(s):  
Jose Carmona

Water is a scarce natural resource fundamental for human life. Power plant architects, engineers, and power utilities owners must do everything within their hands and technical capabilities to decrease the usage of water in power plants. This paper illustrates the research carried out by Pöyry Switzerland to reduce the water consumption on power and desalination combined cycle power plants, on which there are gas turbine evaporative cooling systems in operation. The present study analyzed the potential re-utilization and integration of the heat recovery steam generator (HRSG) blowdown into the evaporative cooling system. Relatively clean demineralized water, coming from the HRSG blowdown, is routed to a large water tank, where it is blended with distillate water to achieve the required water quality, before being used on the gas turbine evaporative cooling system. To prove the feasibility of the HRSG blowdown recycling concept, the Ras Al Khair Power and Desalination Plant owned and operated by the Saline Water Conversion Corporation (SWCC), located in the Eastern Province of the Kingdom of Saudi Arabia, was used as case study. Nevertheless, it is important to mention that the principles and methodology presented on this paper are applicable to every power and desalination combined cycle power plant making use of evaporative cooling. Sea water desalination is the primary source for potable water production on Saudi Arabia, with secondary sources being surface water and groundwater extracted from deep wells and aquifers. Saving water is of utmost importance for power plants located in locations where water is scarce, and as such, this paper aims to demonstrate that it is possible to decrease the water consumption of power and desalination combined cycle plants, on which evaporative cooling is used as gas turbine power booster, without having to curtail power production. The outcome of the study indicates that during the summer season, recycling the HRSG water blowdown into the gas turbine evaporative cooling systems would result on the internal water consumption for the gas turbine evaporative coolers decreasing by 545 ton/day, or 23.79%, compared with the original plant design which does not contemplate blowdown re-use. Using evaporative cooling results on an overall gain of 186 MW, or 10.27%, on gross power output, while CO2 emissions decrease by 46.8 ton CO2/h, which represents a 13.8% reduction compared with the case on which the evaporative cooling system is not in operation. A brief cost analysis demonstrated that implementation of the changes would result in a negligible increase of the operational expenses (OPEX) of the plant, i.e., implementation of the suggested modification has an unnoticeable impact on the cost of electricity (CoE). The payback of the project, due to limited operating hours on evaporative cooling every year, is of 12 years for a 30 year plant lifetime, while 2.22 M USD of extra-revenue on potable water sales are generated as a result of implementing the proposed solution. Although in principle this value is modest, the effect of government subsidies on water tariffs as well as political and strategic cost of water is not included on the calculations. In conclusion, the study results indicate that water recycling, and reduction of plant's water footprint for power and desalination combined cycle plants using evaporative cooling, is not only technically possible but commercially feasible.

Author(s):  
Jeffrey Goldmeer ◽  
Paul Glaser ◽  
Bassam Mohammad

Abstract The Kingdom of Saudi Arabia has seen significant transformation in power generation in the past 10 years. There has been an increase in the number of F-class combined cycle power plants being developed and brought into commercial operation. There has also been a shift to the use of natural gas as primary fuel. At the same time, there has been an interest in switching the back-up fuel for new power plants from refined distillates to domestic crude oils. Both Arabian Super Light (ASL) and Arabian Extra Light (AXL) have been proposed for use in new F-class gas turbine combined cycle power plants. This paper provides details on the combustion evaluations of ASL and AXL, as well as the first field usage of ASL in a gas turbine.


Author(s):  
Geoffrey Short ◽  
Addison K. Stark ◽  
Daniel Matuszak ◽  
James F. Klausner

Fresh water withdrawal for thermoelectric power generation in the U.S. is approximately 139 billion gallons per day (BGD), or 41% of total fresh water draw, making it the largest single use of fresh water in the U.S. Of the fresh water withdrawn for the power generation sector, 4.3 BGD is dissipated to the atmosphere by cooling towers and spray ponds. Dry-cooled power plants are attractive and sometimes necessary because they avoid significant withdrawal and consumption of freshwater resources that could otherwise be used for other purposes. This could become even more important when considering the potential effects of climate change (1). Additional benefits of dry-cooling include power plant site flexibility, reduced risk of water scarcity, and faster permitting (reducing project development time and cost). However, dry-cooling systems are known to be more costly and larger than their wet-cooling counterparts. Additionally, without the benefit of additional latent heat transfer through evaporation, the Rankine cycle condensing (cold) temperature for dry-cooling is typically higher than that for wet-cooling, affecting the efficiency of power production and the resultant levelized cost of electricity (LCOE). The Advanced Research Projects Agency - Energy (ARPA-E) has developed a technoeconomic analysis (TEA) model for the development of indirect dry-cooling systems employing steam condensation within a natural gas combined cycle power plant. The TEA model has been used to inform the Advanced Research in Dry-Cooling (ARID) Program on the performance metrics needed to achieve an economical dry-cooling technology. In order to assess the relationship between air-cooled heat exchanger (ACHX) performance, including air side heat transfer coefficient and pressure drop, and power plant economics, ARPA-E has employed a modified version of the National Energy Technology Laboratory (NETL) model of a 550 MW natural gas combined cycle (NGCC) plant employing an evaporative cooling system. The evaporative cooling system, including associated balance of system costs, was replaced with a thermodynamic model for an ACHX with the desired improved heat transfer performance and supplemental cooling and storage systems. Monte Carlo simulation determined an optimal ACHX geometry and associated ACHX cost. Allowing for an increase in LCOE of 5%, the maximum allowable additional cost of the supplemental cooling system was determined as a function of the degree of cooling of the working fluid required. This paper describes the methodologies employed in the TEA, details the results, and includes related models as supplemental material, while providing insight on how the open source tool might be used for thermal management innovation.


Author(s):  
Helmer Andersen ◽  
Pen-Chung Chen ◽  
Theo Hartmann

Alstom has developed a monitoring and optimization system to offer the power plant an integrated maintenance and diagnosis system. This system is capable of monitoring all Alstom machines and processes in a combined cycle power plant: the gas turbine, steam turbine, generator, HRSG, and cooling system. All data archived in a central database server. Any personal computer networked with the server can display the process data and calculated results. To limit the scope of current paper, only the gas turbine monitoring and diagnostic module is presented. The system concept, configuration, and the environment of gas turbine module as well as capability will be discussed in this paper. The Gas Turbine Module (GTM) provides continuous monitoring of the GT process and continuous displaying of certain calculated results. The GTM provides a tool aimed to help the operator to make decisions, which affect efficiency, reliability and damage control. The monitoring areas include combustion stability (pulsation analysis), exhaust temperature distribution, compressor fouling and surge margin, and thermal performance. Furthermore, the GTM can provide the thermodynamic variables at the gas turbine exhaust for other applications in the combined cycle calculation. The implementation of this module is based on the users’ requirements to optimize the operation, to increase plant reliability and availability, and to optimize equipment performance. The GTM is a PC-based monitoring and diagnostic system. A guiding principal is that the retrofit of the GTM should have minimal impact on the gas turbine control system. This is the reason the system is PC based. A remote connection can be made via network. Users can access and see all real time and historical data by means of a networked computer. The real key success of the GTM is to be able to detect an early component failure and abnormalities during normal plant operation. Therefore, this information can be used for plant management, production forecast, equipment maintenance, and part replacement decision strategy.


2012 ◽  
Vol 433-440 ◽  
pp. 7229-7233
Author(s):  
Karim Maghsoudi Mehraban ◽  
Seyyed Vahid Mahmoodi Jezeh ◽  
Seyyed Hossein Musa Kazemi

In the hot days of summer, the efficiency of gas turbine is extremely reduced because the input air to compressors becomes hot. For solving this problem, one can increase the efficiency of the power house by charging to decrease the input air temperature to the compressor of gas turbine. In this paper, all kinds of cooling the inlet air to the gas turbine are introduced and then the technical and economical evaluation of these installed cooling system in Shahid Rajaee, Qom, Fars and Yazd power plants are expressed and the results show that the fog system cannot prove its effectiveness in Shahid Rajaee and Qom power plants. Whereas the installation of media systems in Fars combined cycle power plant produces more megawatt than its guarantee conditions and no particular problem has been observed.


Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.


2010 ◽  
Vol 132 (12) ◽  
pp. 57-57
Author(s):  
Lee S. Langston

This article presents an overview of gas turbine combined cycle (CCGT) power plants. Modern CCGT power plants are producing electric power as high as half a gigawatt with thermal efficiencies approaching the 60% mark. In a CCGT power plant, the gas turbine is the key player, driving an electrical generator. Heat from the hot gas turbine exhaust is recovered in a heat recovery steam generator, to generate steam, which drives a steam turbine to generate more electrical power. Thus, it is a combined power plant burning one unit of fuel to supply two sources of electrical power. Most of these CCGT plants burn natural gas, which has the lowest carbon content of any other hydrocarbon fuel. Their near 60% thermal efficiencies lower fuel costs by almost half compared to other gas-fired power plants. Their installed capital cost is the lowest in the electric power industry. Moreover, environmental permits, necessary for new plant construction, are much easier to obtain for CCGT power plants.


Author(s):  
Albrecht H. Mayer ◽  
Noel W. Lively

To meet peaking power demands the E.W. Brown Station, owned and operated by Kentucky Utilities Company, was extended by two GT24 gas turbines. The project had to meet a 9-month engineering, construction and commissioning schedule. The conceptual design is based on ABB ALSTOM POWER’S reference plant design for combined cycle application. It was adjusted to the requirements of a simple cycle operation. Special plant features such as evaporative cooling of the inlet air, system design of the evaporative cooling system, performance and experience will be discussed in detail. The plant has an aggressive running and starting reliability goal; the approach to meet the required plant reliability will be discussed below. The initial operational feedback will be addressed as well as an outlook on how to meet all project goals.


Sign in / Sign up

Export Citation Format

Share Document