Copper tailings reprocessing

in English Copper is widely used in the modern world. An excellent conductor of electricity, it is used in the electrical industry, in the construction industry because of its good corrosion resistance, and in the manufacture of heat exchangers in heating and cooling systems owing to its excellent thermal conductivity. Copper production has increased throughout the twentieth century, and this trend has continued over the last twenty years. The demand for copper is expected to increase significantly by the year 2030. Owing to the high prices of this metal and the lack of deposits, part of the demand can be met by extraction from copper-bearing tailings. In the past, owing to the lower level of technological development and lower copper prices, materials comparable in copper content to the copper ores mined today have ended up in tailings. Since these are already processed materials, the costs of mining, crushing and milling are largely eliminated, making them promising raw materials. The article presents the technological possibilities of reprocessing and also estimates the amount of copper that could be obtained worldwide in this way.

When social practices produce space and create passive cooling systems in hot arid region

Practice social of people is the key to produce space and give a possibility to maintain thermal comfort and energy efficiency. The main objective of this research is to adapt the traditional strategies in the architecture actual, to achieved a thermal comfort and improve on reducing cooling load through the using of vernacular gait. Today, it is necessary to practice these systems in the current or conventional architecture of household. The study is especially for arid cities namely the region of Saoura, in the hot and dry climatic zone in Algeria, considered for this study. Two main factors is considered such as design and urban where taken into account in order to select the appropriate and specific passive cooling strategy. The results show that the passive cooling strategy of courtyard would be appropriate for arid regions, however a high thermal mass would be suitable for construction. In conclusion, this work made it possible to choose a suitable passive cooling strategy for all types of construction in hot and dry climates. Finally, this paper puts forward a set of recommendations to improve the passive design of future buildings in hot and arid climates.

Improving Energy Efficiency by Utilizing Wetted Cellulose Pads in Passive Cooling Systems

The effectiveness of using wetted cellulose pads on improving the performance of two conventional passive cooling systems has been evaluated. First, an experimental design was developed to determine the impact of using a wetted cellulose pad on the temperature and velocity of the airflow. A cellulose pad (7090 model) with a cross-sectional area of 0.5 × 0.5 m2 and three different thicknesses of 10, 15, and 30 cm were selected and tested. The results indicated that using wetted cellulose pads with thicknesses ranging from 10–30 cm decreased the outlet airflow temperature from 11.3 to 13.7 °C on average. For free airflow at velocity 3.5 m/s, the outlet airflow velocity from the wetted cellulose pad decreased to 0.9, 0.7 and 0.6 m/s, respectively, for cellulose pads with thicknesses of 10, 15, and 30 cm. By applying experimental results on a psychrometric chart, the humidity ratio of outlet airflow was obtained between 40–70%. The study established airflow velocity as the critical parameter in passive cooling systems. With the novel concept of combining wetted cellulose pads for passive cooling systems (i.e., wind catchers and induced ventilation), there is good potential to reduce the energy requirements for thermal comfort in buildings in regions with a hot and arid climate.

2022 Roadmap on 3D Printing for Energy

This roadmap aims to define the guidelines to maximise the impact of the 3D printing revolution on the next generation of devices for the energy transition. It also outlines the current status, challenges and required advances in Science and Technology for a series of power generation technologies (fuel cells, solar cells, thermoelectric generators and turbomachinery) and energy storage technologies (electrolysers, batteries and supercapacitors). Finally, the roadmap discusses the role of 3D printing in improving the mass and heat transfer to improve the energy efficiency of chemical reactors (CO2 conversion) and novel cooling systems. With this document, the authors intend to provide a valuable tool for researchers, technology developers, and policymakers when defining their strategies for the energy sector's future.

Design of an adiabatic air conditioning package system

Air conditioning plays a significant role to maintain a cool atmosphere in warm conditions, However, the power consumed by the machine is higher. The commercial prevailing cooling systems are required to operate ventilation and cooling systems in buildings and in turn consumes more power. These systems apart from consuming electricity it also adds to the CO2 emissions to our environment. These energy consumption and CO2 emissions can be decreased by the assistance of energy effective frameworks to the prevailing air conditioning system. The study was conducted on a package unit of 414.2 kW by measuring the relative humidity, dry bulb, and wet bulb temperature to investigate the effect of indirect evaporative cooling on the systems COP. Also, the modelling of the package unit was done using Creo software and the analysis was carried out using ANSYS considering the flow and thermal analysis for different components of the package units. From this analysis it can be observed that by implementing the adiabatic cooling in package unit it is possible to save energy consumption. From the results it can be concluded that energy efficiency was more and the return on investment is high. Also, coefficient of performance of this machine is high and consumes less electricity and the expected energy savings is 20%.