Analyses of Feedwater Trip With SBO Sequence of VVER1000 Reactor

2016 ◽  
Vol 2 (4) ◽  
Author(s):  
Guido Mazzini ◽  
Miloš Kynčl ◽  
Marek Ruščák
Keyword(s):  
Nuclear Power ◽  
Lessons Learned ◽  
Severe Accident ◽  
Research Centre ◽  
Stress Tests ◽  
Research Organizations ◽  
Trace Model ◽  
Station Blackout ◽  
Project Prevention

In the Czech Republic, as a follow-up, a consortium of research organizations and universities has decided to simulate selected stress tests’ scenarios, in station blackout (SBO) and the loss of ultimate heat sink (LoUHS), with the aim to verify the national stress report and to analyze time response of respective source term releases. These activities are carried out in the frame of the project prevention, preparedness, and mitigation of consequences of severe accident (SA) at Czech NPPs in relation to lessons learned from stress tests after Fukushima, financed by the Ministry of Interior. The Research Centre Rez has been working on a methods for estimation of leakages and consequences of releases (MELCOR) model for VVER1000 nuclear power plant (NPP) starting with a plant systems nodalization. The aim was to benchmark the MELCOR model with the validated TRAC/RELAP advanced computational engine (TRACE) model, first comparing the steady state and continuing in a long-term SBO plus another event until the beginning of the SA. The presented work is based on the previous paper from the ICONE 23rd Conference hosted in Japan. It focuses mainly on the comparison of the thermohydraulics of the two models created in MELCOR and TRACE codes as outcome of the “Fukushima project.” After that, preliminary general results of the SA progression showing the hydrogen production and the relocation phenomena will be shortly discussed. This scenario is considered closed after some seconds to the break of the lower head. It is important to note that this paper is a substantial update of a previous one (Mazzini et al., 2015, “Analyses of SBO Sequence of VVER1000 Reactor Using TRACE and MELCOR Codes,” 23rd International Conference on Nuclear Engineering (ICONE23)) and although it contains the same descriptive sections, all the results are new.

Severe Accident Context Quantification for Long-Term Station Blackout in Boiling Water Reactor Nuclear Power Plants

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Gueorgui I. Petkov ◽  
Monica Vela-Garcia
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Boiling Water ◽  
Severe Accident ◽  
Boiling Water Reactor ◽  
Water Reactor ◽  
Accident Scenario ◽  
Station Blackout ◽  
Fukushima Daiichi

The realistic study of dynamic accident context is an invaluable tool to address the uncertainties and their impact on safety assessment and management. The capacities of the performance evaluation of teamwork (PET) procedure for dynamic context quantification and determination of alternatives, coordination, and monitoring of human performance and decision-making are discussed in this paper. The procedure is based on a thorough description of symptoms during the accident scenario progressions with the use of thermo-hydraulic (TH) model and severe accident (SA) codes (melcor and maap). The opportunities of PET procedure for context quantification are exemplified for the long-term station blackout (LT SBO) accident scenario at Fukushima Daiichi #1 and a hypothetic unmitigated LT SBO at peach bottom #1 boiling water reactor (BWR) reactor nuclear power plants (NPPs). The context quantification of these LT SBO scenarios is based on the IAEA Fukushima Daiichi accident report, “State-of-the-Art Reactor Consequence Analysis” and TH calculations made by using maap code at the EC Joint Research Centre.

scholarly journals Long-Term Station Blackout Accident Analyses of a PWR with RELAP5/MOD3.3

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Andrej Prošek ◽  
Leon Cizelj
Keyword(s):  
Management Strategies ◽  
Severe Accident ◽  
Stress Tests ◽  
Pressurized Water ◽  
Makeup Water ◽  
Reactor Coolant ◽  
The Core ◽  
Station Blackout ◽  
Accident Sequences

Stress tests performed in Europe after accident at Fukushima Daiichi also required evaluation of the consequences of loss of safety functions due to station blackout (SBO). Long-term SBO in a pressurized water reactor (PWR) leads to severe accident sequences, assuming that existing plant means (systems, equipment, and procedures) are used for accident mitigation. Therefore the main objective was to study the accident management strategies for SBO scenarios (with different reactor coolant pumps (RCPs) leaks assumed) to delay the time before core uncovers and significantly heats up. The most important strategies assumed were primary side depressurization and additional makeup water to reactor coolant system (RCS). For simulations of long term SBO scenarios, including early stages of severe accident sequences, the best estimate RELAP5/MOD3.3 and the verified input model of Krško two-loop PWR were used. The results suggest that for the expected magnitude of RCPs seal leak, the core uncovery during the first seven days could be prevented by using the turbine-driven auxiliary feedwater pump and manually depressurizing the RCS through the secondary side. For larger RCPs seal leaks, in general this is not the case. Nevertheless, the core uncovery can be significantly delayed by increasing RCS depressurization.

Severe Accident Context Evaluation for BWR NPPS Based on Long-Term Station Blackout

2016 ◽  
Author(s):  
Gueorgui I. Petkov ◽  
Monica Vela-Garcia
Keyword(s):  
Safety Assessment ◽  
Power Plants ◽  
Human Performance ◽  
Severe Accident ◽  
Research Centre ◽  
Joint Research ◽  
Accident Scenario ◽  
Station Blackout ◽  
Fukushima Daiichi

The realistic study of dynamic accident context is an invaluable tool to address the uncertainties and their impact on safety assessment and management. The capacities of the Performance Evaluation of Teamwork procedure for dynamic context quantification and determination of alternatives, coordination and monitoring of human performance and decision-making are discussed in this paper. The procedure is based on a thorough description of symptoms during the accident scenario progressions (timelines) with the use of thermo-hydraulic model and severe accident codes (MELCOR and MAAP). The opportunities of PET procedure for context quantification are exemplified for the long-term station blackout (LT SBO) accident scenario at Fukushima Daiichi #1 and an hypothetic unmitigated LT SBO at Peach Bottom #1 Boiling Water Reactor Nuclear Power Plants. The context quantification of these LT SBO scenarios is based on the IAEA Fukushima Daiichi accident report, “State-of-the-Art Reactor Consequence Analysis” and thermo-hydraulic calculations made by using MAAP code at the EC Joint Research Centre, Institute for Energy and Transport, Nuclear Reactor Safety Assessment Unit.

Source Term Analysis Considering B4C/Steel Interaction and Oxidation During Severe Accidents

2017 ◽  
Author(s):  
Jun Ishikawa ◽  
Tomoyuki Sugiyama ◽  
Yu Maruyama
Keyword(s):  
Source Term ◽  
Severe Accident ◽  
Water Pool ◽  
Energy Agency ◽  
Severe Accidents ◽  
Station Blackout ◽  
Carbon Dioxide Co2 ◽  
Accident Sequences ◽  
Term Analysis

The Japan Atomic Energy Agency (JAEA) is pursuing the development and application of the methodologies on fission product (FP) chemistry for source term analysis by using the integrated severe accident analysis code THALES2. In the present study, models for the eutectic interaction of boron carbide (B4C) with steel and the B4C oxidation were incorporated into THALES2 code and applied to the source term analyses for a boiling water reactor (BWR) with Mark-I containment vessel (CV). Two severe accident sequences with drywell (D/W) failure by overpressure initiated by loss of core coolant injection (TQUV sequence) and long-term station blackout (TB sequence) were selected as representative sequences. The analyses indicated that a much larger amount of species from the B4C oxidation was produced in TB sequence than TQUV sequence. More than a half of carbon dioxide (CO2) produced by the B4C oxidation was predicted to dissolve into the water pool of the suppression chamber (S/C), which could largely influence pH of the water pool and consequent formation and release of volatile iodine species.

Identification of Failure Modes Under Design Extension Conditions

2015 ◽  
Author(s):  
Naoto Kasahara ◽  
Izumi Nakamura ◽  
Hideo Machida ◽  
Hitoshi Nakamura ◽  
Koji Okamoto
Keyword(s):  
High Temperature ◽  
Nuclear Power ◽  
Failure Modes ◽  
Low Cycle Fatigue ◽  
External Pressure ◽  
Lessons Learned ◽  
Local Failure ◽  
Severe Accident ◽  
Mitigation Measures ◽  
Loading Mode

As the important lessons learned from the Fukushima-nuclear power plant accident, mitigation of failure consequences and prevention of catastrophic failure became essential against severe accident and excessive earthquake conditions. To improve mitigation measures and accident management, clarification of failure behaviors with locations is premise under design extension conditions such as severe accidents and earthquakes. Design extension conditions induce some different failure modes from design conditions. Furthermore, best estimation for these failure modes are required for preparing countermeasures and management. Therefore, this study focused on identification of failure modes under design extension conditions. To observe ultimate failure behaviors of structures under extreme loadings, new experimental techniques were adopted with simulation materials such as lead and lead-antimony alloy, which has very small yield stress. Postulated failure modes of main components under design extension conditions were investigated according three categories of loading modes. The first loading mode is high temperature and internal pressure. Under this mode, ductile fracture and local failure were investigated. At the structural discontinuities, local failure may become dominant. The second is high temperature and external pressure loading mode. Buckling and fracture were investigated. Buckling occurs however hardly break without additional loads or constraints. The last loading is excessive earthquake. Ratchet deformation, collapse, and fatigue were investigated. Among them, low-cycle fatigue is dominant.

The Severe Accident Analysis of CPR1000 Based on MELCOR Code

2013 ◽  
Author(s):  
Longze Li ◽  
Mingjun Wang ◽  
Wenxi Tian ◽  
Guanghui Su ◽  
Suizheng Qiu
Keyword(s):  
Power Plant ◽  
Nuclear Power ◽  
Failure Time ◽  
Water Pressure ◽  
Severe Accident ◽  
Feed Water ◽  
Calculation Results ◽  
Station Blackout ◽  
Accident Response ◽  
Basic Standard

The severe accident of CPR1000 caused by station blackout with the SG safety valve failure is simulated and analyzed using MELCOR code in this work. The CPR1000 power plant severe accident response process and the results with three different assumptions, which are no the seal leakage nor the auxiliary feed water, the seal leakage and auxiliary feed water exist, the seal leakage exist but no auxiliary feed water separately, are analyzed. According to the calculation results, without the seal leakage and auxiliary feed water, pressure vessel would fail at 9576 s. When auxiliary feed water was supplied, pressure vessel’s failure time would delay nearly 30000s. When the seal leakage exists, pressure vessel’s failure time would delay about 50 s. The results are meaningful and significant for comprehending the detailed process of severe accident for CPR1000 nuclear power plant, which is the basic standard for establishing the severe accident management guideline.

Issues Associated With the Development of Severe Accident Management Guidelines for NPPs in China

2013 ◽  
Author(s):  
Zhiyi Yang ◽  
Yimin Chong ◽  
Chun Li ◽  
Jian Deng ◽  
Xianhong Xu ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Severe Accident ◽  
Regulatory Body ◽  
Control Room ◽  
Technical Approach ◽  
Management Guidelines ◽  
Accident Management ◽  
Term Monitoring

After Fukushima nuclear accident, the Severe Accident Management Guidelines (SAMGs) are required according to the policy of the regulatory body in China. Most nuclear power plants (NPPs) in China adopt the technical approach of generic-SAMG of the Westinghouse Owner Group, consisting of severe accident control room guideline (SACRG), diagnostic flow chart (DFC), severe accident guideline (SAG), severe challenge status tree (SCST), severe challenge guideline (SCG), technical support center (TSC) long term monitoring guideline, and SAMG termination guideline (SAEG). A number of issues have been identified during the development of the SAMGs for M310+ NPPs, which is a dominant reactor type in China. The paper discussed these issues and identified some considerations for their resolution.

scholarly journals Extended Station Blackout Coping Capabilities of APR1400

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Sang-Won Lee ◽  
Tae Hyub Hong ◽  
Mi-Ro Seo ◽  
Young-Seung Lee ◽  
Hyeong-Taek Kim
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Water Injection ◽  
Severe Accident ◽  
Injection Strategy ◽  
Safety Improvement ◽  
External Injection ◽  
Station Blackout ◽  
The Government ◽  
External Water

The Fukushima Dai-ichi nuclear power plant accident shows that an extreme natural disaster can prevent the proper restoration of electric power for several days, so-called extended SBO. In Korea, the government and industry performed comprehensive special safety inspections on all domestic nuclear power plants against beyond design bases external events. One of the safety improvement action items related to the extended SBO is installation of external water injection provision and equipment to RCS and SG. In this paper, the extended SBO coping capability of APR1400 is examined using MAAP4 to assess the effectiveness of the external water injection strategy. Results show that an external injection into SG is applicable to mitigate an extended SBO scenario. However, an external injection into RCS is only effective when RCS depressurization capacity is sufficiently provided in case of high pressure scenarios. Based on the above results, the technical basis of external injection strategy will be reflected on development of revised severe accident management guideline.

Sign in / Sign up

Export Citation Format

Share Document