Fast Floor Response Spectra Generation Technique

1983 ◽  
Vol 105 (1) ◽  
pp. 35-41
Author(s):  
M. J. Yan
Keyword(s):  
Nuclear Reactor ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Computer Time ◽  
Coupled Systems ◽  
Mass System ◽  
Floor Response Spectra ◽  
History Analysis ◽  
Response Spectral Analysis

A consistent technique is derived for generating floor response spectra for equipment in nuclear reactor systems using response spectral analysis. The use of this technique eliminates the requirement for a time history analysis. The technique is based on the dynamic theory of coupling the supporting building with a very light spring-mass system representing the equipment. The response of the spring-mass system in the coupled systems is the floor response spectrum at the spring-mass system frequency. Resonant and off-resonant cases are derived separately. This technique is more efficient in the use of computer time than the conventional time history techniques. Moreover, a more realistic response spectrum is generated by this technique.

Use of RVT for Computation of In-Structure Response Spectra and Peak Responses and Comparison to Time History and Response Spectrum Analysis

2018 ◽  
Vol 34 (4) ◽  
pp. 1913-1930 ◽  
Author(s):  
Irmela Zentner
Keyword(s):  
Response Spectrum ◽  
Structural Response ◽  
Time History ◽  
Strong Motion ◽  
Response Spectra ◽  
Combination Rules ◽  
Floor Response Spectra ◽  
Power Spectral ◽  
Time Histories ◽  
Definition Of

The random vibration theory offers a framework for the conversion of response spectra into power spectral densities (PSDs) and vice versa. The PSD is a mathematically more suitable quantity for structural dynamics analysis and can be straightforwardly used to compute structural response in the frequency domain. This allows for the computation of in-structure floor response spectra and peak responses by conducting only one structural analysis. In particular, there is no need to select or generate spectrum-compatible time histories to conduct the analysis. Peak response quantities and confidence intervals can be computed without any further simplifications such as currently used in the response spectrum method, where modal combination rules have to be derived. In contrast to many former studies, the Arias intensity-based definition of strong-motion duration is adopted here. This paper shows that, if the same definitions of strong-motion duration and modeling assumptions are used for time history and RVT computations, then the same result can be expected. This is illustrated by application to a simplified model of a reactor building.

Study on Piping Response Under Multiple Excitation: Part 2 — Validation for Multiple Excitation Analysis of Piping

2013 ◽  
Author(s):  
Satoru Kai ◽  
Tomoyoshi Watakabe ◽  
Naoaki Kaneko ◽  
Kunihiro Tochiki ◽  
Makoto Moriizumi ◽  
...  
Keyword(s):  
Seismic Response ◽  
Seismic Design ◽  
Nuclear Power ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Shaking Table ◽  
Response Analysis ◽  
Multiple Time ◽  
Floor Response Spectra

The piping in a nuclear power plant is laid across multiple floors of a single building or two buildings, which are supported at many points. As the piping is excited by multiple-inputs from the supporting points during an earthquake, seismic response analysis by multiple excitations is needed to obtain the exact seismic response of the piping. However, few experiments involving such multiple excitation have been performed to verify the validity of multiple excitation analysis. Therefore, analysis of the seismic design of piping in Japan is performed by the enveloped Floor Response Spectrum (FRS), which covers all floor response spectra at all supporting points. The piping response estimated by enveloped FRS is conservative in most cases compared with the actual seismic response by multiple excitations. To perform rational seismic design and evaluation, it is important to investigate the seismic response by multiple excitations and to verify the validity of the analytical method by multiple excitation test. This paper reports the validation results of the multiple-excitation analysis of piping compared with the results of the multiple excitations shaking test using triple uni-axial shaking table and a 3-dimensional piping model (89.1mm diameter and 5.5mm thickness). Three directional moments from the analysis and the shaking test were compared on the validation. As the result, it is confirmed that the analysis by multiple time history excitation corresponds with the test result.

Design Applicability of the Advanced Spectrum Method Assisted by Time History Analysis for Multiply Supported Piping System

2020 ◽  
Author(s):  
Ayaka Yoshida ◽  
Yoshihiro Takayama ◽  
Hiromichi Shudo
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Time History Analysis ◽  
Piping System ◽  
Acceleration Time ◽  
Spectrum Method ◽  
History Analysis ◽  
Acceleration Time Histories

Abstract The independent support motion response spectrum method (ISM) is currently used for seismic analysis to calculate the response of multiply supported piping system with independent inputs of support excitations. This approach may derive considerable overestimation in the combination of group responses under the absolute sum rule of NUREG-1061. To reduce the excessive overestimation, an advanced method named “Spectrum Method Assisted by Time History Analysis (SATH)” has been proposed. In the SATH method, modal responses by multiple excitations are combined with correlation coefficients which are calculated from the covariances and the standard deviations of time history responses of the oscillators having each of modal frequencies of piping system by each of the floor acceleration time history excitations. In this paper, the applicability of the SATH method to actual design which uses broadened Floor Response Spectra (FRS) was examined. Conservativeness of the SATH method is also discussed with presenting that responses derived from the SATH method tend to exceed responses by the time history analysis even when many different time intervals of acceleration time histories are used within the range of the FRS broadening.

Analytical Estimation of Structural Integrity for a Thermocouple in Nuclear Power Plant

2012 ◽  
Vol 569 ◽  
pp. 572-575
Author(s):  
Bang Hyun Cho ◽  
Hoon Hyung Jung ◽  
Jae Duk Hwang ◽  
Chae Sil Kim ◽  
Hun Oh Choi
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Response Spectrum ◽  
Response Spectra ◽  
Seismic Load ◽  
Response Curves ◽  
Floor Response Spectra ◽  
Analytical Estimation

Thermocouples used for temperature measurement in nuclear power plants should meet the seismic qualification regulations of -IEEE Std 323 and 344 so as to withstand big vibrations such as earthquakes. In this paper, we establish a model for the estimation of the structural integrity of the thermocouples that are used in nuclear reactor building models. We then review the need for seismic measure using modal analysis and the boundary condition. If the natural frequency is less than 33 Hz for the installation environment, response spectrum analysis was carried out taking into consideration the weight of this interpretation and that of the seismic load models in the input response curves (Floor Response Spectra) OBE (Operation Base Earthquake), and SSE (Safe Shutdown Earthquake). Finally, analytical estimation of the structural integrity of a thermocouple is performed by making a comparison of the maximum stress and the allowable stress.

Application of Earthquake Resistance Analysis Technique in the Design of Constructional Engineering

2013 ◽  
Vol 756-759 ◽  
pp. 4482-4486
Author(s):  
Chun Gan ◽  
Xue Song Luo
Keyword(s):  
Response Spectrum ◽  
Structural Response ◽  
Time History ◽  
Economic Losses ◽  
Element Analysis ◽  
Architectural Engineering ◽  
Analysis Technique ◽  
History Analysis ◽  
Earthquake Resistant ◽  
History Of

In recent years, frequent earthquakes have caused great casualties and economic losses in China. And in the earthquake, damage of buildings and the collapse is the main reason causing casualties. Therefore, in the design of constructional engineering, a seismicity of architectural structure is the pressing task at issue. Through time history analysis method, this paper analyzes the time history of building structural response and then it predicts the peak response of mode by response spectrum analysis. Based on this, this paper constructs a numerical simulation model for the architecture by using finite element analysis software SATWE. At the same time, this paper also calculates the structure seismic so as to determine the design of each function structure in architectural engineering design and then provides reference for the realization of earthquake-resistant building.

scholarly journals Review on Seismic Analysis of Multistoried Building in Hilly Region

2021 ◽  
Vol 9 (12) ◽  
pp. 73-79
Author(s):  
Harsh Joshi
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Center Of Mass ◽  
Time History ◽  
Lateral Loads ◽  
Base Shear ◽  
Building Frames ◽  
Building Frame ◽  
History Analysis ◽  
Hilly Region

Abstract: Due to sloping land and high seismically active zones, designing and construction of multistory buildings in hilly regions is always a challenge for structural engineers. This review paper focuses to establish a review study on the Possible Types of building frame configuration in the hilly region and he behavior of Such building frames under seismic loading conditions, and (3) The recent research and developments to make such frames less vulnerable to earthquakes. This paper concludes that the dynamics characteristics of such buildings are significantly different in both horizontal and vertical directions, resulting in the center of mass and center of stiffness having eccentricity at point of action and not vertically aligned for different floors. When such frames are subjected to lateral loads, due to eccentricity it generates torsion in the frame. Most of the studies agree that the buildings resting on slanting ground have higher displacement and base shear compared to buildings resting on plain ground and the shorter column attracts more forces and undergoes damage when subjected to earthquake. Keywords: Building frame configuration, Seismic behavior, Dynamic characteristics, Response spectrum analysis, time history analysis.

Response spectral matching of horizontal ground motion components to an orientation-independent spectrum (RotDnn)

2020 ◽  
pp. 875529302097098
Author(s):  
Luis A Montejo
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Major Axis ◽  
Component Level ◽  
Nonlinear Characteristics ◽  
Target Spectrum ◽  
Horizontal Ground Motion ◽  
Median Spectrum

This article presents a methodology to spectrally match two horizontal ground motion components to an orientation-independent target spectrum (RotDnn). The algorithm is based on the continuous wavelet transform decomposition and iterative manipulation of the two horizontal components of a seed record. The numerical examples presented follow current ASCE/SEI 7 specifications and therefore maximum-direction spectra (RotD100) are used as target for the match. However, the proposed methodology can be used to match other RotDnn spectra, like the median spectrum (RotD50). It is shown that with the proposed methodology the resulting RotDnn from the modified horizontal components closely match the smooth target RotDnn spectrum, while the response spectrum for each horizontal component continue to exhibit a realistic jagged behavior. The response spectra variability at the component level within suites of spectrally matched motions was found to be of the same order than the variability measured in suites composed of amplitude scaled records. Moreover, the spectrally matched records generated preserved most of the characteristics of the seed records, including the nonlinear characteristics of the time history traces and the period-dependent major axis orientations.

Direct Displacement Procedure for Performance-Based Seismic Design of Mid-Rise Wood-Framed Structures

2009 ◽  
Vol 25 (3) ◽  
pp. 583-605 ◽  
Author(s):  
Wei Chiang Pang ◽  
David V. Rosowsky
Keyword(s):  
Seismic Design ◽  
Response Spectrum ◽  
Design Procedure ◽  
Time History ◽  
Time History Analysis ◽  
Nonlinear Time History Analysis ◽  
Framed Structures ◽  
History Analysis ◽  
Performance Based Seismic Design ◽  
Nonlinear Time History

This paper presents a direct displacement design (DDD) procedure that can be used for seismic design of multistory wood-framed structures. The proposed procedure is applicable to any pure shear deforming system. The design procedure is a promising design tool for performance-based seismic design since it allows consideration of multiple performance objectives (e.g., damage limitation, safety requirements) without requiring the engineer to perform a complex finite element or nonlinear time-history analysis of the complete structure. A simple procedure based on normalized modal analysis is used to convert the code-specified acceleration response spectrum into a set of interstory drift spectra. These spectra can be used to determine the minimum stiffness required for each floor based on the drift limit requirements. Specific shear walls can then be directly selected from a database of backbone curves. The procedure is illustrated on the design of two three-story ATC-63 archetype buildings, and the results are validated using nonlinear time-history analysis.

Study on Seismic Performance of Reinforced Concrete Masonry High-Rise Building

2012 ◽  
Vol 166-169 ◽  
pp. 2164-2170
Author(s):  
Xu Jie Sun ◽  
Hou Zhang ◽  
Da Gang Lu ◽  
Feng Lai Wang
Keyword(s):  
Reinforced Concrete ◽  
Response Spectrum ◽  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Masonry Building ◽  
Analysis Method ◽  
Concrete Masonry ◽  
History Analysis ◽  
Earthquake Action

The design process of the 100 m high reinforced concrete masonry building in China was firstly presented, deformation check calculation under earthquake action by mode-superposition response spectrum method and time-history analysis method were detailed and deformation under wind load was also checked. Then elastic-plastic deformation under earthquake action was checked by time-history analysis method and pushover analysis method with both under uniform load and reverse triangle load. The conclusion is construct 100 m high office building built in Fortification intensity 6 by reinforced concrete masonry is feasible. Then the building was redesigned as built in fortification 7, the same check was performed as that have been done in fortification 6, it is feasible too.

Floor Spectra Estimates for an Industrial Special Concentrically Braced Frame Structure

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Roberto Javier Merino Vela ◽  
Emanuele Brunesi ◽  
Roberto Nascimbene
Keyword(s):  
Time History ◽  
Response Spectra ◽  
Frame Structure ◽  
Eurocode 8 ◽  
Industrial Complex ◽  
Braced Frame ◽  
Nonstructural Components ◽  
Floor Response Spectra ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

Nonstructural components play an important role in the correct functioning of industrial facilities, which may suffer greatly from earthquake-induced actions, as demonstrated by past seismic events. Therefore, the correct evaluation of seismic demands acting upon them is of utmost importance when assessing or designing an industrial complex exposed to seismic hazard. Among others, nonlinear time history analyses (NLTHA) of structural systems including nonstructural elements and floor response spectra are well-known methods for computing these actions, the former being more accurate and the latter being less onerous. This work focuses on deriving floor spectra for a steel special concentrically braced frame (SCBF), which is a common type of lateral-load resisting system for industrial frames. The results are used to compute the seismic actions on a small liquid storage tank mounted on the case study frame. Additionally, the results are compared to those obtained by modeling the structure and the tank together, that is, by modeling the tank explicitly and incorporating it within the model of the support structure. To this end, a simple model, consisting of two uncoupled single degree-of-freedom systems, is used for the tank. The floor spectra resulting from both approaches are compared to establish differences in the behavior of the structure and nonstructural element/component. Finally, the seismic demand on the tank—obtained by direct and indirect analyses—is compared to that obtained by applying ASCE 7-10 and Eurocode 8 prescriptions.

Sign in / Sign up

Export Citation Format

Share Document