Use of Scanning Microphotometer to Determine the Evaporative Heat Transfer Characteristics of the Contact Line Region

1981 ◽  
Vol 103 (2) ◽  
pp. 325-330 ◽  
Author(s):  
R. Cook ◽  
C. Y. Tung ◽  
P. C. Wayner
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Heat Flux ◽  
Contact Line ◽  
Heat Transfer Characteristics ◽  
Thin Film Thickness ◽  
Thickness Profile ◽  
Line Region ◽  
Evaporative Heat Transfer

A scanning microphotometer was used to measure in situ the profile of an evaporating decane meniscus in the contact line region on a smooth inclined silicon substrate as a function of the evaporative heat flux. The use of this new experimental design to determine the effect of heat flux on the profile in the contact line region is discussed. The results support the hypothesis that fluid flow in the contact line region of an evaporating thin film results from a change in the thin film thickness profile.

Use of the Kelvin-Clapeyron Equation to Model an Evaporating Curved Microfilm

1994 ◽  
Vol 116 (4) ◽  
pp. 1007-1015 ◽  
Author(s):  
S. DasGupta ◽  
I. Y. Kim ◽  
P. C. Wayner
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
Contact Line ◽  
Transfer Model ◽  
Clapeyron Equation ◽  
Thickness Profile ◽  
Line Region ◽  
Evaporative Flux ◽  
The Heat Transfer Coefficient

A Kelvin–Clapeyron change-of-phase heat transfer model is used to evaluate experimental data for an evaporating meniscus. The details of the evaporating process near the contact line are obtained. The heat flux and the heat transfer coefficient are a function of the film thickness profile, which is a measure of both the intermolecular stress field in the contact line region and the resistance to conduction. The results indicate that a stationary meniscus with a high evaporative flux is possible. At equilibrium, the augmented Young–Laplace equation accurately predicts the meniscus slope. The interfacial slope is a function of the heat flux.

scholarly journals Thermal analysis in thin-film fluid regions of rectangular microgroove

2018 ◽  
Vol 22 (2) ◽  
pp. 899-897
Author(s):  
Xiaohong Gui ◽  
Xiange Song ◽  
Baisheng Nie
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Heat Flux ◽  
Contact Angle ◽  
Film Thickness ◽  
Flux Distribution ◽  
Total Heat ◽  
Heat Flux Distribution ◽  
Total Heat Transfer ◽  
Thin Film Thickness

The effects of contact angle and superheat on thin-film thickness and heat flux distribution occurring in a rectangle microgroove are numerically simulated. Accordingly, physical, and mathematical models are built in detail. Numerical results indicate that meniscus radius and thin-film thickness increase with the improvement of contact angle. The heat flux distribution in the thin-film region increases non-linearly as the contact angle decreases. The total heat transfer through the thin-film region increases with the improvement of superheat, and decreases as the contact angle increases. When the contact angle is equal to zero, the heat transfer in the thin-film region accounts for more than 80% of the total heat transfer. Intensive evaporation in the thin-film region plays a key role in heat transfer for the rectangle capillary microgroove. The liquid with higher wetting performance is more capable of playing the advantages of higher intensity heat transfer in thin- film region. The current investigation will result in a better understanding of thin- -film evaporation and its effect on the effective thermal conductivity in the rectangle microgroove.

Heat Transfer Characteristics of Downward Facing Hot Horizontal Surfaces Using Mist Jet Impingement

2017 ◽  
Author(s):  
Ashutosh Kumar Yadav ◽  
Parantak Sharma ◽  
Avadhesh Kumar Sharma ◽  
Mayank Modak ◽  
Vishal Nirgude ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Surface Heat Flux ◽  
Cooling System ◽  
Water Pressure ◽  
Jet Impingement ◽  
Surface Heat ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics

Impinging jet cooling technique has been widely used extensively in various industrial processes, namely, cooling and drying of films and papers, processing of metals and glasses, cooling of gas turbine blades and most recently cooling of various components of electronic devices. Due to high heat removal rate the jet impingement cooling of the hot surfaces is being used in nuclear industries. During the loss of coolant accidents (LOCA) in nuclear power plant, an emergency core cooling system (ECCS) cool the cluster of clad tubes using consisting of fuel rods. Controlled cooling, as an important procedure of thermal-mechanical control processing technology, is helpful to improve the microstructure and mechanical properties of steel. In industries for heat transfer efficiency and homogeneous cooling performance which usually requires a jet impingement with improved heat transfer capacity and controllability. It provides better cooling in comparison to air. Rapid quenching by water jet, sometimes, may lead to formation of cracks and poor ductility to the quenched surface. Spray and mist jet impingement offers an alternative method to uncontrolled rapid cooling, particularly in steel and electronics industries. Mist jet impingement cooling of downward facing hot surface has not been extensively studied in the literature. The present experimental study analyzes the heat transfer characteristics a 0.15mm thick hot horizontal stainless steel (SS-304) foil using Internal mixing full cone (spray angle 20 deg) mist nozzle from the bottom side. Experiments have been performed for the varied range of water pressure (0.7–4.0 bar) and air pressure (0.4–5.8 bar). The effect of water and air inlet pressures, on the surface heat flux has been examined in this study. The maximum surface heat flux is achieved at stagnation point and is not affected by the change in nozzle to plate distance, Air and Water flow rates.

Sign in / Sign up

Export Citation Format

Share Document