A Comprehensive Model for Pilot-Ignited, Coal-Water Mixture Combustion in a Direct-Injection Diesel Engine

1990 ◽  
Vol 112 (3) ◽  
pp. 384-390
Author(s):  
S. Wahiduzzaman ◽  
P. N. Blumberg ◽  
R. Keribar ◽  
C. I. Rackmil
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Accurate Determination ◽  
Engine Performance ◽  
Operating Conditions ◽  
Combustion Model ◽  
Water Mixture ◽  
Engine Design ◽  
Pilot Fuel

A combustion model has been developed for a direct-injected diesel engine fueled with coal-water slurry mixture (CWM) and assisted by diesel pilot injection. The model combines the unique heat and mass transport and chemical kinetic processes of CWM combustion with the normal in-cylinder processes of a diesel engine. It includes a two-stage evaporation submodel for the drying of the CWM droplet, a global kinetic submodel for devolatilization, and a char combustion submodel describing surface gasification by oxygen, carbon dioxide, and water vapor. The combustion volume is discretized into multiple zones, each of whose individual thermochemistry is determined by in-situ equilibrium calculations. This provides an accurate determination of the boundary conditions for the CWM droplet combustion submodels and the gas phase heat release. A CWM fuel jet development, entrainment, and mixing submodel is used to calculate the mass of unburned air in each of the burned zones. A separate submodel of diesel pilot fuel combustion is incorporated into the overall model, as it has been found that pilot fuel is required to achieve satisfactory combustion under many operating conditions. The combustion model is integrated with an advanced engine design analysis code. The integrated model can be used as a tool for exploration of the effects of fuel characteristics, fuel injection parameters, and engine design variables on engine performance, and in the assessment of the effects of component design modifications on the overall efficiency of the engine and the degree of coal burnout achieved.

1D Engine Simulation of a Small HSDI Diesel Engine Applying a Predictive Combustion Model

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
T. Cerri ◽  
A. Onorati ◽  
E. Mattarelli
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Fuel Injection ◽  
Direct Injection ◽  
Combustion Process ◽  
Numerical Approach ◽  
Operating Conditions ◽  
Combustion Model ◽  
Full Load ◽  
Partial Load

The paper analyzes the operations of a small high speed direct injection (HSDI) turbocharged diesel engine by means of a parallel experimental and computational investigation. As far as the numerical approach is concerned, an in-house 1D research code for the simulation of the whole engine system has been enhanced by the introduction of a multizone quasi-dimensional combustion model, tailored for multijet direct injection diesel engines. This model takes into account the most relevant issues of the combustion process: spray development, air-fuel mixing, ignition, and formation of the main pollutant species (nitrogen oxide and particulate). The prediction of the spray basic patterns requires previous knowledge of the fuel injection rate. Since the direct measure of this quantity at each operating condition is not a very practical proceeding, an empirical model has been developed in order to provide reasonably accurate injection laws from a few experimental characteristic curves. The results of the simulation at full load are compared to experiments, showing a good agreement on brake performance and emissions. Furthermore, the combustion model tuned at full load has been applied to the analysis of some operating conditions at partial load, without any change to the calibration parameters. Still, the numerical simulation provided results that qualitatively agree with experiments.

1D Engine Simulation of a Small HSDI Diesel Engine Applying a Predictive Combustion Model

2006 ◽  
Author(s):  
T. Cerri ◽  
A. Onorati ◽  
E. Mattarelli
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Combustion Process ◽  
Numerical Approach ◽  
Injection Rate ◽  
Operating Conditions ◽  
Combustion Model ◽  
Full Load ◽  
Partial Load

The paper analyses, by means of a parallel experimental and computational investigation, the performances of a small HSDI turbocharged Diesel engine. As far as the numerical approach is concerned, an in-house ID research code for the simulation of the whole engine system has been enhanced by the introduction of a multi-zone quasi-dimensional combustion model, tailored for multi-jet direct injection Diesel engines. This model takes into account the most relevant issues of the combustion process: the spray development, the in-cylinder air-fuel mixing process, the ignition and formation of the main pollutant species, such as nitrogen oxides and particulate. The prediction of the spray basic patterns requires the previous knowledge of the fuel injection rate. Since the direct measure of this quantity at each operating condition is not a very practical proceeding, an empirical model has been developed in order to provide reasonably accurate injection laws from a few experimental characteristic curves. The results of the simulation at full load are compared to experiments, showing a good agreement on brake performance and emissions. Furthermore, the combustion model tuned at full load has been applied without any change to the analysis of some operating conditions at partial load. Still, the numerical simulation provided results which qualitatively agree with experiments.

Simulation of a Single Cylinder Diesel Engine Under Cold Start Conditions Using Simulink

2000 ◽  
Vol 123 (1) ◽  
pp. 117-124 ◽  
Author(s):  
H.-Q. Liu ◽  
N. G. Chalhoub ◽  
N. Henein
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Cold Start ◽  
Operating Conditions ◽  
Combustion Model ◽  
Nonlinear Dynamic Model ◽  
Single Cylinder ◽  
Engine Model ◽  
Simulink Model ◽  
Engine Components

A nonlinear dynamic model is developed in this study to simulate the overall performance of a naturally aspirated, single cylinder, four-stroke, direct injection diesel engine under cold start and fully warmed-up conditions. The model considers the filling and emptying processes of the cylinder, blowby, intake, and exhaust manifolds. A single zone combustion model is implemented and the heat transfer in the cylinder, intake, and exhaust manifolds are accounted for. Moreover, the derivations include the dynamics of the crank-slider mechanism and employ an empirical model to estimate the instantaneous frictional losses in different engine components. The formulation is coded in modular form whereby each module, which represents a single process in the engine, is introduced as a single block in an overall Simulink engine model. The numerical accuracy of the Simulink model is verified by comparing its results to those generated by integrating the engine formulation using IMSL stiff integration routines. The engine model is validated by the close match between the predicted and measured cylinder gas pressure and engine instantaneous speed under motoring, steady-state, and transient cold start operating conditions.

Analysis of Throttle Opening Variation Impact on a Diesel Engine Performance Using Second Law of Thermodynamics

2009 ◽  
Author(s):  
B. B. Sahoo ◽  
U. K. Saha ◽  
N. Sahoo ◽  
P. Prusty
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Fuel Efficiency ◽  
Engine Performance ◽  
Second Law Of Thermodynamics ◽  
Operating Conditions ◽  
Second Law ◽  
Engine Fuel ◽  
Availability Analysis ◽  
Second Law Analysis

The fuel efficiency of a modern diesel engine has decreased due to the recent revisions to emission standards. For an engine fuel economy, the engine speed is to be optimum for an exact throttle opening (TO) position. This work presents an analysis of throttle opening variation impact on a multi-cylinder, direct injection diesel engine with the aid of Second Law of thermodynamics. For this purpose, the engine is run for different throttle openings with several load and speed variations. At a steady engine loading condition, variation in the throttle openings has resulted in different engine speeds. The Second Law analysis, also called ‘Exergy’ analysis, is performed for these different engine speeds at their throttle positions. The Second Law analysis includes brake work, coolant heat transfer, exhaust losses, exergy efficiency, and airfuel ratio. The availability analysis is performed for 70%, 80%, and 90% loads of engine maximum power condition with 50%, 75%, and 100% TO variations. The data are recorded using a computerized engine test unit. Results indicate that the optimum engine operating conditions for 70%, 80% and 90% engine loads are 2000 rpm at 50% TO, 2300 rpm at 75% TO and 3250 rpm at 100% TO respectively.

Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, and Particulate Investigations of Gasohols Fuelled Gasoline Direct Injection Engine

2019 ◽  
Vol 142 (4) ◽  
Author(s):  
Nikhil Sharma ◽  
Avinash Kumar Agarwal
Keyword(s):  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Driving Forces ◽  
Direct Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Operating Conditions ◽  
Gasoline Direct Injection ◽  
Primary Alcohols ◽  
Renewable Fuel

Abstract Fuel availability, global warming, and energy security are the three main driving forces, which determine suitability and long-term implementation potential of a renewable fuel for internal combustion engines for a variety of applications. Comprehensive engine experiments were conducted in a single-cylinder gasoline direct injection (GDI) engine prototype having a compression ratio of 10.5, for gaining insights into application of mixtures of gasoline and primary alcohols. Performance, emissions, combustion, and particulate characteristics were determined at different engine speeds (1500, 2000, 2500, 3000 rpm), different fuel injection pressures (FIP: 40, 80, 120, 160 bars) and different test fuel blends namely 15% (v/v) butanol, ethanol, and methanol blended with gasoline, respectively (Bu15, E15, and M15) and baseline gasoline at a fixed (optimum) spark timing of 24 deg before top dead center (bTDC). For a majority of operating conditions, gasohols exhibited superior characteristics except minor engine performance penalty. Gasohols therefore emerged as serious candidate as a transitional renewable fuel for utilization in the existing GDI engines, without requirement of any major hardware changes.

Accurate prediction of the rate of heat release in a modern direct injection diesel engine

2002 ◽  
Vol 216 (8) ◽  
pp. 663-675 ◽  
Author(s):  
P A Lakshminarayanan ◽  
Y V Aghav ◽  
A D Dani ◽  
P S Mehta
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Direct Injection ◽  
Turbulent Energy ◽  
Operating Conditions ◽  
Combustion Model ◽  
Injection Velocity ◽  
Mixing Rate ◽  
Di Diesel Engine ◽  
Rate Of Heat Release

An accurate model for the heat release rate in a modern direct injection (DI) diesel engine is newly evolved from the known mixing controlled combustion model. The combustion rate could be precisely described by relating the mixing rate to the turbulent energy created at the exit of the nozzle as a function of the injection velocity and by considering the dissipation of energy in free air and along the wall. The complete absence of tuning constants distinguishes the model from the other zero-dimensional or pseudomultidimensional models, at the same time retaining the simplicity. Successful prediction of the history of heat release in engines widely varying in bores, rated speeds and types of aspirations, at all operating conditions, validated the model.

Multidimensional Modeling of Combustion for a Six-Mode Emissions Test Cycle on a DI Diesel Engine

1997 ◽  
Vol 119 (3) ◽  
pp. 683-691 ◽  
Author(s):  
J. Xin ◽  
D. Montgomery ◽  
Z. Han ◽  
R. D. Reitz
Keyword(s):  
Diesel Engine ◽  
Time Scale ◽  
Characteristic Time ◽  
Direct Injection ◽  
Chemical Species ◽  
Operating Conditions ◽  
Scale Model ◽  
Combustion Model ◽  
Multiple Time ◽  
Multiple Characteristic

Numerical simulations of direct injection (DI) heavy-duty diesel engine combustion over the entire engine operating range were conducted using the KIVA code, with modifications to the spray, combustion, turbulence, and heat transfer models. In this work, the effect of the rates of species conversion from reactants to products in the combustion model was investigated, and a characteristic time combustion model was formulated to allow consideration of multiple characteristic time scales for the major chemical species. In addition, the effect of engine operating conditions on the model formulation was assessed, and correlations were introduced into the combustion model to account for the effects of residual gas and Exhaust Gas Recirculation (EGR). The predictions were compared with extensive engine test data. The calculation results, had good overall agreement with the experimental cylinder pressure and heat release results, and the multiple-time-scale combustion model is shown to give improved emissions predictions compared to a previous single-time-scale model. Overall, the NOx predictions are in good agreement with the experiments. The soot predictions are also in reasonable agreement with the measured particulates at medium and high loads. However, at light loads, the agreement deteriorates, possibly due to the neglect of the contribution of SOF in the soot model predictions.

Effect of Fuel Injection Pressure and Preheating on the Performance and Emissions of a Vegetable Oil Fuelled Diesel Engine

2004 ◽  
Author(s):  
Pugazhvadivu Serane ◽  
Jeyachandran Krishnamurthy
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Fuel Injection ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Injection Pressure ◽  
Operating Conditions ◽  
Frying Oil ◽  
Waste Frying Oil ◽  
Performance And Emission

In the present investigation, waste frying oil, a non-edible vegetable oil is used as a diesel fuel substitute. Performance and emission tests were carried out in a naturally aspirated, single cylinder, direct injection diesel engine with and without preheating the waste frying oil and with fuel injection pressures of 190 bar, 210 bar, 230 bar and 250 bar. Performance parameters such as brake specific energy consumption and brake thermal efficiency and emission parameters such as NOx and smoke density were evaluated at various operating conditions. Increasing the injection pressure with and without preheating the fuel is found to improve the performance and reduce smoke emissions. At these conditions, the NOx concentration is seen to increase, however it is lower than pure diesel operation.

Sign in / Sign up

Export Citation Format

Share Document