Effect of Two-to-One Internal Resonances in a Nonlinearly Restrained Fluid Valve

1999 ◽  
Vol 121 (1) ◽  
pp. 59-63 ◽  
Author(s):  
G. Anlas¸
Keyword(s):  
Nonlinear Response ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Primary Resonance ◽  
Distributed Parameter ◽  
Parameter System ◽  
Response Curves ◽  
Internal Resonances ◽  
Relief Valve ◽  
Steady State Solutions

The effect of two-to-one internal resonances on the nonlinear response of a pressure relief valve is studied. The fluid valve is modeled as a distributed parameter system at one end and nonlinearly restrained at the other. The method of multiple scales is used to solve the system of partial differential equation and boundary conditions. Frequency-response curves are presented for the primary resonance of either mode in the presence of a two-to-one internal resonance. Stability of the steady-state solutions is investigated. Parameters of the system leading to two-to-one internal resonances are tabulated.

Nonlinear Vibrations of a Beam-Spring-Mass System

1994 ◽  
Vol 116 (4) ◽  
pp. 433-439 ◽  
Author(s):  
M. Pakdemirli ◽  
A. H. Nayfeh
Keyword(s):  
Nonlinear Response ◽  
Nonlinear Vibrations ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Nonlinear Partial Differential Equations ◽  
Primary Resonance ◽  
Fast Time ◽  
Lagrange Equations ◽  
Response Curves ◽  
Mass System

The nonlinear response of a simply supported beam with an attached spring-mass system to a primary resonance is investigated, taking into account the effects of beam midplane stretching and damping. The spring-mass system has also a cubic nonlinearity. The response is found by using two different perturbation approaches. In the first approach, the method of multiple scales is applied directly to the nonlinear partial differential equations and boundary conditions. In the second approach, the Lagrangian is averaged over the fast time scale, and then the equations governing the modulation of the amplitude and phase are obtained as the Euler-Lagrange equations of the averaged Lagrangian. It is shown that the frequency-response and force-response curves depend on the midplane stretching and the parameters of the spring-mass system. The relative importance of these effects depends on the parameters and location of the spring-mass system.

Primary Resonance of the Current-Carrying Beam in Thermal-Magneto-Elasticity Field

2010 ◽  
Vol 29-32 ◽  
pp. 16-21 ◽  
Author(s):  
Xiao Yan Xi ◽  
Zhian Yang ◽  
Li Li Meng ◽  
Chang Jian Zhu
Keyword(s):  
Response Curve ◽  
Nonlinear Vibrations ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Primary Resonance ◽  
Response Curves ◽  
Bending Vibration ◽  
Approximation Solution ◽  
System Parameters ◽  
Practical Engineering

On base of the electro-magneto-elastic theory and the theory of the bending vibration of the electric beam, nonlinear vibration equation of current-carrying beam subjected to thermal-magneto-elasticity field is studied. The Lorentz force and thermal force on the beam are derived. According to the method of multiple scales for nonlinear vibrations the approximation solution of the primary resonance of the system is obtained. Numerical analysis results show that the amplitude changed with the system parameters. With the decrease of magnetic intensity, the amplitude increases rapidly. The response curve occurs bending phenomenon and soft features is increased gradually. Increasing current, the amplitudes increase. With the decrease of temperature, the peak of response curves decrease. With the increase of temperature, natural frequency decreased. It is useful in practical engineering.

On the Nonlinear Response of a Relief Valve

1978 ◽  
Vol 100 (4) ◽  
pp. 675-680 ◽  
Author(s):  
M. A. Dokainish ◽  
M. M. Elmadany
Keyword(s):  
Nonlinear Response ◽  
Forced Response ◽  
Distributed Parameter ◽  
Response Curves ◽  
Relief Valve ◽  
Single Degree Of Freedom ◽  
Third Harmonic ◽  
Valve System ◽  
Subharmonic Response ◽  
Subharmonic Vibration

The free and forced response of a relief valve system has been analyzed. The valve system consists of a valve having a mass, resting on a seat having nonlinear spring characteristics, and retained by a helical spring which is considered to be a distributed parameter element. The response curves of the first and third harmonic and one-third subharmonic, the amplitudes of which vary with the frequency of the external force, are investigated and presented graphically. It is found that harmonic, higher-harmonic, and subharmonic response of the system may become unstable within certain frequency ranges. Jump and hysteresis phenomena analogous to that of nonlinear single-degree-of-freedom systems are observed. It is also observed that subharmonic vibration may exist in a number of specified frequency ranges.

scholarly journals Nonlinear Dynamic Response of Ropeway Roller Batteries via an Asymptotic Approach

2021 ◽  
Vol 11 (20) ◽  
pp. 9486
Author(s):  
Andrea Arena
Keyword(s):  
Nonlinear Dynamic ◽  
Multiple Scales ◽  
Equations Of Motion ◽  
Primary Resonance ◽  
Resonance Excitation ◽  
Dynamic Features ◽  
Response Curves ◽  
Internal Resonances ◽  
The Third ◽  
Fold Bifurcation

The nonlinear dynamic features of compression roller batteries were investigated together with their nonlinear response to primary resonance excitation and to internal interactions between modes. Starting from a parametric nonlinear model based on a previously developed Lagrangian formulation, asymptotic treatment of the equations of motion was first performed to characterize the nonlinearity of the lowest nonlinear normal modes of the system. They were found to be characterized by a softening nonlinearity associated with the stiffness terms. Subsequently, a direct time integration of the equations of motion was performed to compute the frequency response curves (FRCs) when the system is subjected to direct harmonic excitations causing the primary resonance of the lowest skew-symmetric mode shape. The method of multiple scales was then employed to study the bifurcation behavior and deliver closed-form expressions of the FRCs and of the loci of the fold bifurcation points, which provide the stability regions of the system. Furthermore, conditions for the onset of internal resonances between the lowest roller battery modes were found, and a 2:1 resonance between the third and first modes of the system was investigated in the case of harmonic excitation having a frequency close to the first mode and the third mode, respectively.

The Nonlinear Response of a Simply Supported Rectangular Metallic Plate to Transverse Harmonic Excitation

2000 ◽  
Vol 67 (3) ◽  
pp. 621-626 ◽  
Author(s):  
O. Elbeyli and ◽  
G. Anlas
Keyword(s):  
Critical Points ◽  
Internal Resonance ◽  
Nonlinear Response ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Primary Resonance ◽  
Harmonic Excitation ◽  
Stability Of Solutions ◽  
Metallic Plate ◽  
Simply Supported

In this study, the nonlinear response of a simply supported metallic rectangular plate subject to transverse harmonic excitations is analyzed using the method of multiple scales. Stability of solutions, critical points, types of bifurcation in the presence of a one-to-one internal resonance, together with primary resonance, are determined. [S0021-8936(00)00603-6]

Nonlinear Dynamics of Electrostatically Actuated Coupled MEMS Parallel Cantilever Resonators

2012 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Kyle N. Taylor
Keyword(s):  
Nonlinear Response ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Equations Of Motion ◽  
Lagrange Equations ◽  
Electrostatically Actuated ◽  
Frequency Responses ◽  
Beam System ◽  
Ground Plate ◽  
Steady State Solutions

This paper deals with the nonlinear response of a coupled cantilever system composed of two micro beams electrostatically actuated. The AC frequency of actuation is near natural frequency of the cantilevers. The two cantilevers are identical. Lagrange equations are used to develop a mathematical model of the system. These equations of motion are nondimensionalized and subjected to the method of multiple scales in order to find steady state solutions. Alternating Current (AC) and Direct Current (DC) actuation voltages are applied between the first cantilever and ground plate with DC voltage applied between the first and second cantilevers. Amplitude-frequency and phase-frequency responses of the system are provided for typical micro beam system structures.

On Direct Methods for Constructing Nonlinear Normal Modes of Continuous Systems

1995 ◽  
Vol 1 (4) ◽  
pp. 389-430 ◽  
Author(s):  
Ali H. Nayfeh
Keyword(s):  
Normal Forms ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Direct Method ◽  
Normal Modes ◽  
Nonlinear Normal Modes ◽  
Continuous Systems ◽  
Internal Resonances ◽  
Relief Valve ◽  
Nonlinear Normal

A direct method based on the method of normal forms is proposed for constructing the nonlinear normal modes of continuous systems. The proposed method is compared with the method of multiple scales and the methods of Shaw and Pierre and King and Vakakis by applying them to three conservative systems with cubic nonlinearities: (a) a hinged-hinged beam resting on a nonlinear elastic foundation, (b) a model of a relief valve (linear elastic spring attached to a nonlinear spring with a mass), and (c) a simply supported linear beam with nonlinear torsional springs at both ends. In the absence of internal resonance, the constructed nonlinear modes with all four methods are the same. The method of multiple scales seems to be the simplest and the least computationally demanding. The methods of multiple scales and normal forms are applicable to problems with and without internal resonances, whereas the present forms of the methods of Shaw and Pierre and King and Vakakis are not applicable to problems with internal resonances.

Nonlinear Vibrations of a Beam-Spring-Large Mass System

2017 ◽  
Author(s):  
Mohammad A. Bukhari ◽  
Oumar R. Barry
Keyword(s):  
Natural Frequencies ◽  
Multiple Scales ◽  
Equations Of Motion ◽  
Primary Resonance ◽  
Large Mass ◽  
Mode Shapes ◽  
Resonance Excitation ◽  
Response Curves ◽  
Mass System ◽  
Spring System

This paper presents the nonlinear vibration of a simply supported Euler-Bernoulli beam with a mass-spring system subjected to a primary resonance excitation. The nonlinearity is due to the mid-plane stretching and cubic spring stiffness. The equations of motion and the boundary conditions are derived using Hamiltons principle. The nonlinear system of equations are solved using the method of multiple scales. Explicit expressions are obtained for the mode shapes, natural frequencies, nonlinear frequencies, and frequency response curves. The validity of the results is demonstrated via comparison with results in the literature. Exact natural frequencies are obtained for different locations, rotational inertias, and masses.

Electrostatically Actuated Coupled MEMS Resonators

2011 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Kyle N. Taylor
Keyword(s):  
Nonlinear Response ◽  
Multiple Scales ◽  
Equations Of Motion ◽  
System Structure ◽  
Lagrange Equations ◽  
Electrostatically Actuated ◽  
Beam System ◽  
Mems Resonators ◽  
The Mathematical Model ◽  
Steady State Solutions

This paper deals with the nonlinear response of an electrostatically actuated cantilever beam system composed of two micro beam resonators near natural frequency. The mathematical model of the system is obtained using Lagrange equations. The equations of motion are nondimensionalized and then the method of multiple scales is used to find steady state solutions. Both AC and DC actuation voltages of the first beam are considered, while the influence on the system of DC on the second beam is explored. Graphical representations of the influence of the detuning parameters are provided for a typical micro beam system structure.

scholarly journals Performance Analysis of an Electromagnetically Coupled Piezoelectric Energy Scavenger

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 845 ◽  
Author(s):  
Abdolreza Pasharavesh ◽  
Reza Moheimani ◽  
Hamid Dalir
Keyword(s):  
Energy Harvesting ◽  
Multiple Scales ◽  
Nonlinear Partial Differential Equations ◽  
Low Frequency ◽  
Primary Resonance ◽  
Excitation Amplitude ◽  
Load Resistance ◽  
Response Curves ◽  
Piezoelectric Energy ◽  
Resonance Frequencies

The deliberate introduction of nonlinearities is widely used as an effective technique for the bandwidth broadening of conventional linear energy harvesting devices. This approach not only results in a more uniform behavior of the output power within a wider frequency band through bending the resonance response, but also contributes to energy harvesting from low-frequency excitations by activation of superharmonic resonances. This article investigates the nonlinear dynamics of a monostable piezoelectric harvester under a self-powered electromagnetic actuation. To this end, the governing nonlinear partial differential equations of the proposed harvester are order-reduced and solved by means of the perturbation method of multiple scales. The results indicate that, according to the excitation amplitude and load resistance, different responses can be distinguished at the primary resonance. The system behavior may involve the traditional bending of response curves, Hopf bifurcations, and instability regions. Furthermore, an order-two superharmonic resonance is observed, which is activated at lower excitations in comparison to order-three conventional resonances of the Duffing-type resonator. This secondary resonance makes it possible to extract considerable amounts of power at fractions of natural frequency, which is very beneficial in micro-electro-mechanical systems (MEMS)-based harvesters with generally high resonance frequencies. The extracted power in both primary and superharmonic resonances are analytically calculated, then verified by a numerical solution where a good agreement is observed between the results.

Sign in / Sign up

Export Citation Format

Share Document