An Experimental and Numerical Investigation into the Mechanisms of Rotating Instability

2002 ◽  
Vol 124 (3) ◽  
pp. 367-374 ◽  
Author(s):  
Joachim Ma¨rz ◽  
Chunill Hah ◽  
Wolfgang Neise
Keyword(s):  
Experimental Study ◽  
Numerical Investigation ◽  
Axial Flow ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Stable Mode ◽  
Tip Clearance Flow ◽  
Double Phase ◽  
Clearance Flow ◽  
Rotating Instability

This paper reports on an experimental and numerical investigation aimed at understanding the mechanisms of rotating instabilities in a low speed axial flow compressor. The phenomena of rotating instabilities in the current compressor were first identified with an experimental study. Then, an unsteady numerical method was applied to confirm the phenomena and to interrogate the physical mechanisms behind them. The experimental study was conducted with high-resolution pressure measurements at different clearances, employing a double phase-averaging technique. The numerical investigation was performed with an unsteady 3-D Navier-Stokes method that solves for the entire blade row. The current study reveals that a vortex structure forms near the leading edge plane. This vortex is the result of interactions among the classical tip-clearance flow, axially reversed endwall flow, and the incoming flow. The vortex travels from the suction side to the pressure side of the passage at roughly half of the rotor speed. The formation and movement of this vortex seem to be the main causes of unsteadiness when rotating instability develops. Due to the nature of this vortex, the classical tip clearance flow does not spill over into the following blade passage. This behavior of the tip clearance flow is why the compressor operates in a stable mode even with the rotating instability, unlike traditional rotating stall phenomena.

An Experimental and Numerical Investigation Into the Mechanisms of Rotating Instability

2001 ◽  
Author(s):  
Joachim März ◽  
Chunill Hah ◽  
Wolfgang Neise
Keyword(s):  
Experimental Study ◽  
Numerical Investigation ◽  
Axial Flow ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Stable Mode ◽  
Tip Clearance Flow ◽  
Double Phase ◽  
Clearance Flow ◽  
Rotating Instability

This paper reports on an experimental and numerical investigation aimed at understanding the mechanisms of rotating instabilities in a low speed axial flow compressor. The phenomena of rotating instabilities in the current compressor were first identified with an experimental study. Then, an unsteady numerical method was applied to confirm the phenomena and to interrogate the physical mechanisms behind them. The experimental study was conducted with high-resolution pressure measurements at different clearances, employing a double phase-averaging technique. The numerical investigation was performed with an unsteady 3-D Navier-Stokes method that solves for the entire blade row. The current study reveals that a vortex structure forms near the leading edge plane. This vortex is the result of interactions among the classical tip-clearance flow, axially reversed endwall flow, and the incoming flow. The vortex travels from the suction side to the pressure side of the passage at roughly half of the rotor speed. The formation and movement of this vortex seem to be the main causes of unsteadiness when rotating instability develops. Due to the nature of this vortex, the classical tip-clearance flow does not spill over into the following blade passage. This behavior of the tip-clearance flow is why the compressor operates in a stable mode even with the rotating instability, unlike traditional rotating stall phenomena.

Tip Clearance Flow Induced Endwall Boundary Layer Separation in a Single–Stage Axial–Flow Low–Speed Compressor

2000 ◽  
Author(s):  
Horst Saathoff ◽  
Udo Stark
Keyword(s):  
Axial Flow ◽  
Boundary Layer Separation ◽  
Single Stage ◽  
Tip Clearance ◽  
Compressor Cascade ◽  
Tip Clearance Flow ◽  
Low Speed ◽  
Pressure Distributions ◽  
Oil Flow ◽  
Clearance Flow

The paper describes an investigation of the overtip end-wall flow in a single–stage axial–flow low–speed compressor utilizing an oil flow technique and a periodic multisampling pressure measurement technique. Representative oil flow pictures and ensemble averaged casingwall pressure distributions with standard deviations — supplemented by selected endwall oil flow pictures from a corresponding 2D compressor cascade — are shown and carefully analysed. The results enable the key features of the overtip endwall flow to be identified and changes with flow rate — or inlet angle — to be determined.

A Method for the Calculation of the Tip Clearance Flow Effects in Axial Flow Compressors: Part II — Calculation Procedure

1993 ◽  
Author(s):  
I. K. Nikolos ◽  
D. I. Douvikas ◽  
K. D. Papailiou
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Vorticity Distribution ◽  
Clearance Flow ◽  
Calculation Results ◽  
Flow Effects ◽  
Set Up ◽  
Induced Velocity ◽  
Theoretical Procedure

An algorithm was set up for the implementation of the tip clearance models, described in Part I, in a secondary flow calculation method. A complete theoretical procedure was, thus, developed, which calculates the circumferentially averaged flow quantities and their radial variation due to the tip clearance effects. The calculation takes place in successive planes, where a Poisson equation is solved in order to provide the kinematic field. The self induced velocity is used for the positioning of the leakage vortex and a diffusion model is adopted for the vorticity distribution. The calculated pressure deficit due to the vortex presence is used, through an iterative procedure, in order to modify the pressure difference in the tip region. The method of implementation and the corresponding algorithm are described in this part of the paper and calculation results are compared to experimental ones for cascades and single rotors. The agreement between theory and experiment is good.

Numerical Investigations of the Coupled Flow Through a Subsonic Compressor Rotor and Axial Skewed Slot

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Yangfeng Zhang
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Flow Through ◽  
Flow Compressor

In order to advance the understanding of the fundamental mechanisms of axial skewed slot casing treatment and their effects on the subsonic axial-flow compressor flow field, the coupled unsteady flow through a subsonic compressor rotor and the axial skewed slot was simulated with a state-of-the-art multiblock flow solver. The computational results were first compared with available measured data, that showed the numerical procedure calculates the overall effect of the axial skewed slot correctly. Then, the numerically obtained flow fields were interrogated to identify the physical mechanism responsible for improvement in stall margin of a modern subsonic axial-flow compressor rotor due to the discrete skewed slots. It was found that the axial skewed slot casing treatment can increase the stall margin of subsonic compressor by repositioning of the tip clearance flow trajectory further toward the trailing of the blade passage and retarding the movement of the incoming∕tip clearance flow interface toward the rotor leading edge plane.

Numerical Investigation of Relation Between Unsteady Behavior of Tip Leakage Vortex and Rotating Disturbance in a Transonic Axial Compressor Rotor

2008 ◽  
Author(s):  
K. Yamada ◽  
K. Funazaki ◽  
H. Sasaki
Keyword(s):  
Vortex Breakdown ◽  
Axial Compressor ◽  
Tip Clearance ◽  
Tip Leakage Vortex ◽  
Tip Clearance Flow ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Transonic Axial Compressor ◽  
Rotating Instability

The purpose of this study is to have a better understanding of the unsteady behavior of tip clearance flow at near-stall condition from a multi-passage simulation and to clarify the relation between such unsteadiness and rotating disturbance. This study is motivated by the following concern. A single passage simulation has revealed the occurrence of the tip leakage vortex breakdown at near-stall condition in a transonic axial compressor rotor, leading to the unsteadiness of the tip clearance flow field in the rotor passage. These unsteady flow phenomena were similar to those in the rotating instability, which is classified in one of the rotating disturbances. In other words it is possible that the tip leakage vortex breakdown produces a rotating disturbance such as the rotating instability. Three-dimensional unsteady RANS calculation was conducted to simulate the rotating disturbance in a transonic axial compressor rotor (NASA Rotor 37). The four-passage simulation was performed so as to capture a short length scale disturbance like the rotating instability and the spike-type stall inception. The simulation demonstrated that the unsteadiness of tip leakage vortex, which was derived from the vortex breakdown at near-stall condition, invoked the rotating disturbance in the rotor, which is similar to the rotating instability.

Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery

1970 ◽  
Vol 92 (3) ◽  
pp. 467-480 ◽  
Author(s):  
B. Lakshminarayana
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Theoretical Treatment ◽  
Tip Clearance Flow ◽  
Pressure Losses ◽  
Clearance Flow ◽  
Alternate Model ◽  
Fundamental Physical ◽  
Stage Efficiency ◽  
Physical Principles

Using the author’s earlier flow model for the tip clearance flow, an expression is derived for the decrease in stage efficiency due to tip clearance. The analysis which includes all the dominant flow and blade parameters that affect the flow in the clearance region is compatible with fundamental physical principles, though not precise mathematically. The predictions agree closely with several compressor, fan, pump, and turbine data available. An alternate model which takes into account the presence of the vortex core is proposed. The theoretical treatment of the flow, more complete than hitherto available, predicts blade-to-blade variation in outlet angles accurately and stagnation pressure losses qualitatively. The predictions are compared with various experimental data available in the literature.

Physics of Tip Clearance Flow in Turbomachinery (Keynote Paper)

2002 ◽  
Author(s):  
Masahiro Inoue ◽  
Masato Furukawa
Keyword(s):  
Flow Field ◽  
Physical Interpretation ◽  
Vortex Core ◽  
Vortical Structure ◽  
Three Dimensional ◽  
Axial Flow ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Clearance Flow ◽  
Flow Phenomena

In a recent advanced aerodynamic design of turbomachinery, the physical interpretation of three-dimensional flow field obtained by a numerical simulation is important for iterative modifications of the blade or impeller geometry. This paper describes an approach to the physical interpretation of the tip clearance flow in turbomachinery. First, typical flow phenomena of the tip clearance flow are outlined for axial and radial compressors, pumps and turbines to help comprehensive understanding of the tip clearance flow. Then, a vortex-core identification method which enables to extract the vortical structure from the complicated flow field is introduced, since elucidation of the vortical structure is essential to the physical interpretation of the tip clearance flow. By use of the vortex-core identification, some interesting phenomena of the tip clearance flows are interpreted, especially focussing on axial flow compressors.

Rotating Stall Observations in a High Speed Compressor—Part II: Numerical Study

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
J. Dodds ◽  
M. Vahdati
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Axial Flow ◽  
Leading Edge ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Numerical Predictions ◽  
Stage 1 ◽  
Variable Stator

In this two-part paper the phenomenon of part span rotating stall is studied. The objective is to improve understanding of the physics by which stable and persistent rotating stall occurs within high speed axial flow compressors. This phenomenon is studied both experimentally (Part I) and numerically (Part II). The experimental observations reported in Part I are now explored through the use of 3D unsteady Reynolds-averaged Navier–Stokes (RANS) simulation. The objective is to both validate the computational model and, where possible, explore some physical aspects of the phenomena. Unsteady simulations are presented, performed at a fixed speed with the three rows of variable stator vanes adjusted to deliberately mismatch the front stages and provoke stall. Two families of rotating stall are identified by the model, consistent with experimental observations from Part I. The first family of rotating stall originates from hub corner separations developing on the stage 1 stator vanes. These gradually coalesce into a multicell rotating stall pattern confined to the hub region of the stator and its downstream rotor. The second family originates from regions of blockage associated with tip clearance flow over the stage 1 rotor blade. These also coalesce into a multicell rotating stall pattern of shorter length scale confined to the leading edge tip region. Some features of each of these two patterns are then explored as the variable stator vanes (VSVs) are mismatched further, pushing each region deeper into stall. The numerical predictions show a credible match with the experimental findings of Part I. This suggests that a RANS modeling approach is sufficient to capture some important aspects of part span rotating stall behavior.

On the Interpretation of Casing Measurements in Axial Compressors

2008 ◽  
Author(s):  
Joshua D. Cameron ◽  
Scott C. Morris ◽  
Sean T. Barrows ◽  
Jen-Ping Chen
Keyword(s):  
Experimental Studies ◽  
Rotating Stall ◽  
Basic Flow ◽  
Tip Clearance ◽  
Stall Inception ◽  
Tip Clearance Flow ◽  
Axial Compressors ◽  
Clearance Flow ◽  
Flow Variables ◽  
Insight Into

Experimental studies of stall inception in axial compressors typically involve the measurement of basic flow variables (often pressure or velocity) with low spatial resolution. These measurements are used to make inferences about the fluid dynamics of stall. This experimental paradigm has been used by many investigators to great effect over the last several decades. However, several limitations remain which restrict the utility of these types of measurements for developing further insight into stall inception physics. Primary among these limitations is the impracticality of making measurements within the rotating blade passages. This is especially troublesome in light of recent computational studies which indicate that the generation of short length-scale rotating disturbances is related to the rotor tip clearance flow. This study utilized the results of a recent full annulus rotating stall simulation to investigate the relationships between the casing pressure field and less observable flow quantities which are believed to be causally related to the generation of rotating disturbances. The CFD results are assumed to represent the true flow physics within the compressor. To the extent that this approximation is true, these results can be used to interpret the meaning of experimental measurements of basic flow variables. These observations not only provide new insight into the interpretation of the large catalog of experimental stall measurements found in the literature, they also give directives for future measurements and numerical simulations.

Sign in / Sign up

Export Citation Format

Share Document