Numerical Investigations of the Coupled Flow Through a Subsonic Compressor Rotor and Axial Skewed Slot

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Yangfeng Zhang
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Flow Through ◽  
Flow Compressor

In order to advance the understanding of the fundamental mechanisms of axial skewed slot casing treatment and their effects on the subsonic axial-flow compressor flow field, the coupled unsteady flow through a subsonic compressor rotor and the axial skewed slot was simulated with a state-of-the-art multiblock flow solver. The computational results were first compared with available measured data, that showed the numerical procedure calculates the overall effect of the axial skewed slot correctly. Then, the numerically obtained flow fields were interrogated to identify the physical mechanism responsible for improvement in stall margin of a modern subsonic axial-flow compressor rotor due to the discrete skewed slots. It was found that the axial skewed slot casing treatment can increase the stall margin of subsonic compressor by repositioning of the tip clearance flow trajectory further toward the trailing of the blade passage and retarding the movement of the incoming∕tip clearance flow interface toward the rotor leading edge plane.

scholarly journals Numerical and Experimental Investigations of Steady Micro-Tip Injection on a Subsonic Axial-Flow Compressor Rotor

2006 ◽  
Vol 2006 ◽  
pp. 1-11 ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Zhiting Tong
Keyword(s):  
Mass Flow ◽  
Axial Flow ◽  
Tip Clearance ◽  
Air Injection ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Tip Injection ◽  
Flow Compressor

Steady tip injection has been demonstrated to be an effective means of extending the stable operating range of a tip-critical compressor. This study presents a state-of-the-art design for the tip injection through the casing with flush-mounted inclined holes and the effectiveness of steady micro-air injection to enhance stability in a subsonic axial-flow compressor rotor using an external-air supply. For the tested rotor, experimental results demonstrate that at 53% design speed, the stalling mass flow can be reduced by 7.69% using an injected mass flow equivalent to 0.064% of the annulus flow. Time-dependent CFD simulations were conducted to identify the physical mechanic that accounts for the beneficial effects of the steady micro-air injection on the performance and stability of the compressor. Detailed analyses of the flow visualization at the tip have exposed the different tip flow topologies between the cases without tip injection and with tip injection. It was found that the primary stall margin enhancement afforded by the steady micro-air injection is a result of the tip-clearance flow manipulation. The repositioning of the tip-clearance vortex further towards the trailing edge of the blade passage and delaying the movement of incoming/tip-clearance flow interface to the leading edge plane are the physical mechanisms responsible for extending the compressor stall margin.

Mechanism of the Interaction Between Casing Treatment and Tip Leakage Flow in a Subsonic Axial Compressor

2006 ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Yanhui Wu
Keyword(s):  
Tip Clearance ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Flow Through

The use of slots and grooves in the shroud over the tips of compressor blades, known as casing treatment, is known as a powerful method to control tip leakage flow through the clearance gap and enhance the flow stability in compressors. This paper present a detailed steady and unsteady numerical studies of the coupled flow through rotor blade passages and two different types of casing treatment for a modern subsonic axial-flow compressor rotor. Particular attention was given to examining the interaction between the tip leakage flow and the casing treatment. In order to validate the multi block model applied in the rotor blade end-wall region, the computational results for the modern subsonic compressor rotor both with and without casing treatment were correlated with available experimental test data for estimation of the global performance. Detailed analyses of the flow visualization at the tip have exposed the different tip flow topologies between the cases with casing treatment and with untreated smooth wall. It was found that the primary stall margin enhancement afforded by the casing treatment is a result of the tip clearance flow manipulation. The repositioning of the tip clearance vortex further towards the trailing edge of the blade passage and delaying the movement of incoming/tip clearance flow interface to the leading edge plane are the physical mechanisms responsible for extending the compressor stall margin.

Experimental and numerical investigation of a subsonic compressor with bend-skewed slot-casing treatment

2006 ◽  
Vol 220 (12) ◽  
pp. 1785-1796 ◽  
Author(s):  
X Lu ◽  
W Chu ◽  
Y Zhang ◽  
J Zhu
Keyword(s):  
Rotor Blade ◽  
Axial Flow ◽  
Efficiency Gain ◽  
Stall Margin ◽  
Blade Passage ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Flow Compressor ◽  
Isentropic Efficiency

On the basis of the test results of discrete axial and blade angle slot casing treatment, a new type of casing treatment was designed for a subsonic axial flow compressor rotor by optimizing various geometry parameters. To obtain a wide operating range and to minimize penalties in terms of isentropic efficiency, seven compressor configurations incorporating casing treatments of 0, 16.6, 33.3, 50, 66.6, 83.3, and 100 per cent rotor exposures were experimentally investigated. The results showed that significant improvements in stall margin are possible in all exposures and insignificant isentropic efficiency sacrifices are recorded in some exposures. Nearly 21.43 per cent stall margin improvement in terms of the corrected mass flow-rate was achieved with 33.3 per cent rotor blade tip axial chord exposure. The compressor built with 16.6 per cent rotor exposure was the best configuration in terms of maximum isentropic efficiency gain. The second issue of the paper was to offer a contribution to the understanding of the physical mechanism by which bend-skewed slot-casing treatment improves stall margin under subsonic conditions. By applying a concept similar to ‘Domain scaling’ approach (as often used in multistage turbomachinery flow-fields) to the interface between the rotor blade passage and end-wall treatments, a time-dependent three-dimensional numerical simulation was performed for the subsonic axial-flow compressor rotor with bend-skewed slot-casing treatment. The numerical results agreed well with the available experimental results. Detailed analyses of the coupled flow through bend-skewed slot-casing treatment and rotor blade passage under subsonic conditions led to some preliminary conclusions as to the flow physics involved in the stall margin improvements afforded by the use of bend-skewed slot-casing treatment.

Numerically Understand the Combined Effect of Tip Clearance and Circumferential Grooves Casing Treatment on the Performance of Single Stage Transonic Axial Flow Compressor

2015 ◽  
Author(s):  
Mitesh Goswami ◽  
Dilipkumar Bhanudasji Alone ◽  
Harish S. Choksi
Keyword(s):  
Axial Flow ◽  
Single Stage ◽  
Tip Clearance ◽  
Combined Effect ◽  
Stall Margin ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Circumferential Groove ◽  
Flow Compressor ◽  
Stage Efficiency

This paper deals with the numerical studies on the combined effect of tip clearance and axisymmetric circumferential grooves casing treatment (CGCT) on the overall performance and stall margin of a single stage transonic axial flow compressor. Steady state numerical analysis was carried out by solving three dimensional Reynolds-averaged-Navier-Stokes (RANS) Equations using the Shear Stress Transport (SST) k-ω Turbulence Model. The numerical stall inception point was identified from the last converged point by the convergence criteria, and the stall margin was numerically predicted. Additionally, the stall margin and the isentropic peak stage efficiencies of the circumferential casing grooves with various tip clearances were compared and evaluated in order to explore the influence of the tip clearance. Results obtained were compared with those obtained on the baseline compressor with the smooth casing (SC). Further computational studies were conducted to study the role of the tip leakage flow in axial compressor in triggering the stall. The relationship between the tip clearance flow, flow field and surge margin extension from circumferential groove casing treatment with various rotor tip clearances were studied numerically. The application of the circumferential groove casing treatment with varying clearance leads to significant improvement in the operating stability of compressor with slight reduction in the isentropic peak stage efficiency for small tip clearances, whereas there was slight increment in the isentropic peak stage efficiency at higher tip clearance of 2.5 mm.

Investigation for the Effects of Circumferential Grooves on the Unsteadiness of Tip Clearance Flow to Enhance Compressor Flow Instability

2010 ◽  
Author(s):  
Shengfeng Zhao ◽  
Xingen Lu ◽  
Junqiang Zhu ◽  
Hongwu Zhang
Keyword(s):  
Physical Mechanism ◽  
Flow Instability ◽  
Axial Flow ◽  
Tip Clearance ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Circumferential Groove ◽  
Clearance Flow

The use of slots and grooves in the shroud over the tips of compressor blades, known as casing treatment, is a powerful method to control tip leakage flow through the clearance gap and enhance the flow stability in compressors. This paper presents a contribution to the understanding of the physical mechanism by which circumferential groove casing treatment manipulates the tip clearance flow’s unsteadiness. A series of computational studies were carried out to understand the physical mechanism responsible for improvement in stall margin of a high subsonic axial-flow compressor rotor due to the circumferential groove casing treatment from an unsteady viewpoint. Detailed analyses of the flow visualization at the tip have exposed the different tip flow topologies between the cases with circumferential groove and with untreated smooth wall. It was found that the primary stall margin enhancement afforded by the circumferential groove casing treatment is a result of the unsteady tip clearance flow manipulation. Breaking balance of incoming/tip clearance flow axial momentum by inducing the radial movement and tangential movement and delay the occurrence of tip clearance’s unsteadiness are the physical mechanisms responsible for extending the compressor stall margin.

Experimental and Numerical Investigation of a Subsonic Compressor With Bend Skewed Slot Casing Treatment

2006 ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Yanhui Wu
Keyword(s):  
Rotor Blade ◽  
Axial Flow ◽  
Efficiency Gain ◽  
Stall Margin ◽  
Blade Passage ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Flow Compressor ◽  
Isentropic Efficiency

Based on the test results of discrete axial and blade angle slot casing treatment, a new type of casing treatment was designed for a subsonic axial flow compressor rotor by optimising various geometry parameters. To obtain a wide operating range and to minimize penalties in terms of isentropic efficiency, seven compressor configurations incorporating casing treatments of 0%, 16.6%, 33.3%, 50%, 66.6%, 83.3% and 100% rotor exposure were experimentally investigated. The results showed that significant improvements in stall margin are possible in all exposures and insignificant isentropic efficiency sacrifices are recorded in some exposures. Nearly 21.43% stall margin improvement in terms of the corrected mass flow rate was achieved with 33.3% rotor blade tip axial chord exposure. The compressor build with 16.6% rotor exposure was the best configuration in terms of maximum isentropic efficiency gain. The second issue of the paper was to offer a contribution to the understanding of the physical mechanism by which bend skewed slot casing treatment improve stall margin under subsonic conditions. By applying a concept similar to “Domain Scaling” approach (as often used in multistage turbomachinery Flow-fields) to the interface between the rotor blade passage and end-wall treatments, a time-dependent 3-dimentional numerical simulation was performed for the subsonic axial-flow compressor rotor with bend skewed slot casing treatment. The numerical results agreed well with experimental results. Detailed analyses of the coupled flow through bend skewed slot casing treatment and rotor blade passage under subsonic conditions led to some preliminary conclusions as to the flow physics involved in the stall margin improvements afforded by the use of bend skewed slot casing treatment.

Numerical study on the effect of blade tip clearance change on stall margin of the transonic axial flow compressor rotor

2021 ◽  
pp. 095765092110368
Author(s):  
Song Yan ◽  
Wuli Chu ◽  
Yu Li ◽  
YuChen Dai
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Calculation Formula ◽  
Size Change ◽  
Stall Margin ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Blade Tip ◽  
Flow Compressor ◽  
Blade Tip Clearance

The change of the blade tip clearance size has an important impact on the performance of the compressor. Considering that the performance curve of the compressor is often limited by surge and stall boundaries, this paper used the numerical simulation method to investigate the influence mechanism of the blade tip clearance size change on the stall margin of transonic axial flow compressor rotor. By mathematically decomposing the calculation formula of the stall margin of rotor, the approximate calculation formula of the change of rotor’s stall margin was obtained. Then, the detailed quantitative analysis of the factors that affect the rotor’s stall margin was carried out, the influence weights of various factors on the rotor’s stall margin was also obtained. Finally, the physical mechanism of the change of the rotor’s performance parameters was obtained by the analysis of rotor tip flow field after the blade tip clearance size change.

Part-Circumference Casing Treatment and the Effect on Compressor Stall

1989 ◽  
Author(s):  
N. A. Cumpsty
Keyword(s):  
Axial Compressor ◽  
Tip Clearance ◽  
Start Time ◽  
Stall Inception ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Stall Margin Improvement

Results are presented and discussed from an axial compressor rotor operated with an axial skewed slot casing treatment over part of the circumference. The compressor was one for which stall was initiated in the tip region and for this type there is some potential for stall margin improvement with lower loss using this. The main significance of the experiments is, however, the possibility of looking at aspects of stall inception. Normally stall inception is a brief transient with an unknown start time and is difficult to study but with the partial casing treatment it was possible to make the untreated section operate continuously in such a way that it underwent the processes normally leading to stall. For a tip stalling rotor the experiments identify the annulus boundary layer as the crucial region of the flow and spillage of the tip-clearance flow forward of the blades as a process leading to the rapid build up of blockage prior to instability and stall.

The Structure of Tip Clearance Flow in Axial Flow Compressors

1995 ◽  
Vol 117 (3) ◽  
pp. 336-347 ◽  
Author(s):  
B. Lakshminarayana ◽  
M. Zaccaria ◽  
B. Marathe
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Complex Nature ◽  
Tip Leakage Flow ◽  
Tip Clearance Flow ◽  
Wall Boundary Layer ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Blade Tip ◽  
Flow Compressor

Detailed measurements of the flow field in the tip region of an axial flow compressor rotor were carried out using a rotating five-hole probe. The axial, tangential, and radial components of relative velocity, as well as the static and stagnation pressures, were obtained at two axial locations, one at the rotor trailing edge, the other downstream of the rotor. The measurements were taken up to about 26 percent of the blade span from the blade tip. The data are interpreted to understand the complex nature of the flow in the tip region, which involves the interaction of the tip leakage flow, the annulus wall boundary layer and the blade wake. The experimental data show that the leakage jet does not roll up into a vortex. The leakage jet exiting from the tip gap is of high velocity and mixes quickly with the mainstream, producing intense shearing and flow separation. There are substantial differences in the structure of tip clearance observed in cascades and rotors.

scholarly journals Effect of Circumferential Single Casing Groove Location on the Flow Stability under Tip-Clearance Effect in a Transonic Axial Flow Compressor Rotor

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6143
Author(s):  
Xiaoxiong Wu ◽  
Bo Liu ◽  
Botao Zhang ◽  
Xiaochen Mao
Keyword(s):  
Control Mechanism ◽  
Incidence Angle ◽  
Axial Flow ◽  
Flow Stability ◽  
Tip Clearance ◽  
Tip Leakage Flow ◽  
Flow Angle ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Flow Compressor

Numerical simulations have been performed to study the effect of the circumferential single-grooved casing treatment (CT) at multiple locations on the tip-flow stability and the corresponding control mechanism at three tip-clearance-size (TCS) schemes in a transonic axial flow compressor rotor. The results show that the CT is more efficient when its groove is located from 10% to 40% tip axial chord, and G2 (located at near 20% tip axial chord) is the best CT scheme in terms of stall-margin improvement for the three TCS schemes. For effective CTs, the tip-leakage-flow (TLF) intensity, entropy generation and tip-flow blockage are reduced, which makes the interface between TLF and mainstream move downstream. A quantitative analysis of the relative inlet flow angle indicates that the reduction of flow incidence angle is not necessary to improve the flow stability for this transonic rotor. The control mechanism may be different for different TCS schemes due to the distinction of the stall inception process. For a better application of CT, the blade tip profile should be further modified by using an optimization method to adjust the shock position and strength during the design of a more efficient CT.

Sign in / Sign up

Export Citation Format

Share Document