Scattering of Guided Waves by Circumferential Cracks in Steel Pipes

2000 ◽  
Vol 68 (4) ◽  
pp. 619-631 ◽  
Author(s):  
H. Bai ◽  
A. H. Shah ◽  
N. Popplewell ◽  
S. K. Datta
Keyword(s):  
Wave Scattering ◽  
Guided Waves ◽  
Crack Depth ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Numerical Procedure ◽  
Axial Direction ◽  
Computational Time ◽  
Steel Pipes ◽  
Transmission Coefficients

A novel numerical procedure is presented in this paper to study wave scattering problem by circumferential cracks in steel pipes. The study is motivated by the need to develop a quantitative ultrasonic technique to characterize properties of cracks in pipes. By employing wave function expansion in axial direction and decomposing the problem into a symmetry problem and an antisymmetry problem, a three-dimensional wave scattering problem is then reduced into two quasi-one-dimensional problems. This simplification greatly reduces the computational time. Numerical results for reflection and transmission coefficients of different incident wave modes are presented here for a steel pipe with cracks (may have arbitrary circumferential crack length and radial crack depth) and they are shown to agree quite closely with available but limited experimental data.

Theoretical researches on three-dimensional coda wave scattering problem

1995 ◽  
Vol 8 (1) ◽  
pp. 83-87 ◽  
Author(s):  
Yong-An Nie ◽  
Jian Zeng ◽  
De-Yi Feng
Keyword(s):  
Wave Scattering ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Coda Wave

scholarly journals Modelling wave-induced sea ice break-up in the marginal ice zone

2017 ◽  
Vol 473 (2206) ◽  
pp. 20170258 ◽  
Author(s):  
F. Montiel ◽  
V. A. Squire
Keyword(s):  
Stress Field ◽  
Wave Scattering ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Field Studies ◽  
Ocean Wave ◽  
Wave Forcing ◽  
Marginal Ice Zone ◽  
Break Up ◽  
Wave Induced

A model of ice floe break-up under ocean wave forcing in the marginal ice zone (MIZ) is proposed to investigate how floe size distribution (FSD) evolves under repeated wave break-up events. A three-dimensional linear model of ocean wave scattering by a finite array of compliant circular ice floes is coupled to a flexural failure model, which breaks a floe into two floes provided the two-dimensional stress field satisfies a break-up criterion. A closed-feedback loop algorithm is devised, which (i) solves the wave-scattering problem for a given FSD under time-harmonic plane wave forcing, (ii) computes the stress field in all the floes, (iii) fractures the floes satisfying the break-up criterion, and (iv) generates an updated FSD, initializing the geometry for the next iteration of the loop. The FSD after 50 break-up events is unimodal and near normal, or bimodal, suggesting waves alone do not govern the power law observed in some field studies. Multiple scattering is found to enhance break-up for long waves and thin ice, but to reduce break-up for short waves and thick ice. A break-up front marches forward in the latter regime, as wave-induced fracture weakens the ice cover, allowing waves to travel deeper into the MIZ.

Axisymmetric Guided Wave Scattering by Cracks in Welded Steel Pipes

1997 ◽  
Vol 119 (4) ◽  
pp. 401-406 ◽  
Author(s):  
W. Zhuang ◽  
A. H. Shah ◽  
S. K. Datta
Keyword(s):  
Wave Scattering ◽  
Guided Waves ◽  
Guided Wave ◽  
Numerical Results ◽  
Steel Pipe ◽  
Welded Steel ◽  
Cylindrical Structures ◽  
Steel Pipes ◽  
Cutoff Frequencies ◽  
Representation Techniques

Scattering of axisymmetric guided waves by cracks and weldments of anisotropic bonding material in welded steel pipes is investigated in this paper by a hybrid method employing finite element and modal representation techniques. The study is motivated by the need to develop a quantitative ultrasonic technique to distinguish flaws and bonding materials in welded cylindrical structures. Numerical results for reflection coefficients are presented for a steel pipe with cracks and V-shaped weldments with and without cracks at the interface between the weldment and the steel pipe. It is shown that as the frequency increases, the coefficients of reflection exhibit resonant peaks at the cutoff frequencies of higher guided modes. These peaks become increasingly pronounced as the slope and the length of the crack increase. Numerical results presented have important applications in quantitative nondestructive evaluation.

scholarly journals A Proof-of-Concept Algorithm for the Retrieval of Total Column Amount of Trace Gases in a Multi-Dimensional Atmosphere

2021 ◽  
Vol 13 (2) ◽  
pp. 270
Author(s):  
Adrian Doicu ◽  
Dmitry S. Efremenko ◽  
Thomas Trautmann
Keyword(s):  
Trace Gases ◽  
Three Dimensional ◽  
Principal Component ◽  
Radiative Transfer Model ◽  
Computational Time ◽  
Transfer Model ◽  
Proof Of Concept ◽  
Discrete Ordinate ◽  
Distribution Method ◽  
Total Column

An algorithm for the retrieval of total column amount of trace gases in a multi-dimensional atmosphere is designed. The algorithm uses (i) certain differential radiance models with internal and external closures as inversion models, (ii) the iteratively regularized Gauss–Newton method as a regularization tool, and (iii) the spherical harmonics discrete ordinate method (SHDOM) as linearized radiative transfer model. For efficiency reasons, SHDOM is equipped with a spectral acceleration approach that combines the correlated k-distribution method with the principal component analysis. The algorithm is used to retrieve the total column amount of nitrogen for two- and three-dimensional cloudy scenes. Although for three-dimensional geometries, the computational time is high, the main concepts of the algorithm are correct and the retrieval results are accurate.

scholarly journals Imaging of bi-anisotropic periodic structures from electromagnetic near-field data

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Dinh-Liem Nguyen ◽  
Trung Truong
Keyword(s):  
Inverse Scattering ◽  
Maxwell Equations ◽  
Field Data ◽  
Periodic Structures ◽  
Near Field ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Inverse Scattering Problem ◽  
Factorization Method ◽  
Unique Determination

AbstractThis paper is concerned with the inverse scattering problem for the three-dimensional Maxwell equations in bi-anisotropic periodic structures. The inverse scattering problem aims to determine the shape of bi-anisotropic periodic scatterers from electromagnetic near-field data at a fixed frequency. The factorization method is studied as an analytical and numerical tool for solving the inverse problem. We provide a rigorous justification of the factorization method which results in the unique determination and a fast imaging algorithm for the periodic scatterer. Numerical examples for imaging three-dimensional periodic structures are presented to examine the efficiency of the method.

scholarly journals Simulation of Thermal and Electric Field Distribution in Packaged Sausages Heated in a Stationary Versus a Rotating Microwave Oven

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1622
Author(s):  
Wipawee Tepnatim ◽  
Witchuda Daud ◽  
Pitiya Kamonpatana
Keyword(s):  
Temperature Distribution ◽  
Electric Field ◽  
Three Dimensional ◽  
Development Stage ◽  
Microwave Oven ◽  
Computational Time ◽  
Plastic Package ◽  
Heating Uniformity ◽  
The Cost ◽  
Good Agreement

The microwave oven has become a standard appliance to reheat or cook meals in households and convenience stores. However, the main problem of microwave heating is the non-uniform temperature distribution, which may affect food quality and health safety. A three-dimensional mathematical model was developed to simulate the temperature distribution of four ready-to-eat sausages in a plastic package in a stationary versus a rotating microwave oven, and the model was validated experimentally. COMSOL software was applied to predict sausage temperatures at different orientations for the stationary microwave model, whereas COMSOL and COMSOL in combination with MATLAB software were used for a rotating microwave model. A sausage orientation at 135° with the waveguide was similar to that using the rotating microwave model regarding uniform thermal and electric field distributions. Both rotating models provided good agreement between the predicted and actual values and had greater precision than the stationary model. In addition, the computational time using COMSOL in combination with MATLAB was reduced by 60% compared to COMSOL alone. Consequently, the models could assist food producers and associations in designing packaging materials to prevent leakage of the packaging compound, developing new products and applications to improve product heating uniformity, and reducing the cost and time of the research and development stage.

scholarly journals The first observation of 4D tomography measurement of plasma structures and fluctuations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chanho Moon ◽  
Kotaro Yamasaki ◽  
Yoshihiko Nagashima ◽  
Shigeru Inagaki ◽  
Takeshi Ido ◽  
...  
Keyword(s):  
Steady State ◽  
Three Dimensional ◽  
Axial Direction ◽  
Axial Position ◽  
Entire Cross Section ◽  
Helicon Plasma ◽  
Emission Profile ◽  
Dimensional Measurement ◽  
Tomography System ◽  
Three Dimensional Measurement

AbstractA tomography system is installed as one of the diagnostics of new age to examine the three-dimensional characteristics of structure and dynamics including fluctuations of a linear magnetized helicon plasma. The system is composed of three sets of tomography components located at different axial positions. Each tomography component can measure the two-dimensional emission profile over the entire cross-section of plasma at different axial positions in a sufficient temporal scale to detect the fluctuations. The four-dimensional measurement including time and space successfully obtains the following three results that have never been found without three-dimensional measurement: (1) in the production phase, the plasma front propagates from the antenna toward the end plate with an ion acoustic velocity. (2) In the steady state, the plasma emission profile is inhomogeneous, and decreases along the axial direction in the presence of the azimuthal asymmetry. Furthermore, (3) in the steady state, the fluctuations should originate from a particular axial position located downward from the helicon antenna.

Sign in / Sign up

Export Citation Format

Share Document