Improved predictions of lead free solder joint reliability that include aging effects

2012 ◽  
Author(s):  
Mohammad Motalab ◽  
Zijie Cai ◽  
Jeffrey C. Suhling ◽  
Jiawei Zhang ◽  
John L. Evans ◽  
...  
Keyword(s):  
Solder Joint ◽  
Lead Free ◽  
Lead Free Solder ◽  
Aging Effects ◽  
Solder Joint Reliability ◽  
Joint Reliability ◽  
Free Solder

Solder Joint Reliability Improvement Using the Cold Ball Pull Metrology

2005 ◽  
Author(s):  
George F. Raiser ◽  
Dudi Amir
Keyword(s):  
Solder Joint ◽  
Electroless Nickel ◽  
Lead Free ◽  
Attractive Alternative ◽  
Lead Free Solder ◽  
Solder Joint Reliability ◽  
Solder Interconnect ◽  
Joint Reliability ◽  
Test Conditions ◽  
Free Solder

The various methods for improvement of package solder joint reliability (SJR) have centered on the broad categories of (i) reductions in the thermomechanical and mechanical stresses and strains applied to the joints, and (ii) strengthening of the solder interconnect interfaces and materials themselves. In practice, the success of the former depends first and foremost on the latter — an adequate and consistent interconnect ‘strength’ during the package development and production cycles. With the advancement of various pad-plating technologies (most notably ENIG – Electroless Nickel Immersion Gold), sphere chemistries, fluxes and processing conditions, each with their own stability issues, the interconnect strengths can easily undergo seemingly random drifts over time. The Dage™ Cold Ball Pull (CBP) technique, however, has emerged as an attractive alternative to the traditional ball-shear metrology as an interconnect strength monitor. The open issues preventing its adoption are related to identifying the best test conditions (e.g. aging time, pull speed, jaw pressure, etc...), all of which are addressed here. After identifying the best test conditions, we present a number of experimental results that highlight the powerful capability of this tool for optimizing and monitoring solder-joint strength. A full metrology characterization to demonstrate accuracy, repeatability and reproducibility has been performed. Moreover, interesting results have been obtained with respect to solder-aging, multiple-reflow, and time-above-liquidus effects on interconnect strength. Examples of direct correlation between CBP measurements and solder-joint shock performance are demonstrated. CBP is also shown to correlate well to other strength metrologies, such as three-point bend. Finally, CBP is used here to show how to strengthen interconnects by the proper selection of pad plating chemistries, sphere compositions, fluxes, reflow conditions, etc… Maintaining those strengths through development and production can be handled effectively using CBP as a monitor. Looking forward, CBP data presented here shows that certain material and processing choices can maximize lead-free solder interconnect strength and lead-free solder joint reliability.

Thermal Cycling Reliability Predictions for PBGA Assemblies That Include Aging Effects

2013 ◽  
Author(s):  
Mohammad Motalab ◽  
Muhannad Mustafa ◽  
Jeffrey C. Suhling ◽  
Jiawei Zhang ◽  
John Evans ◽  
...  
Keyword(s):  
Finite Element ◽  
Solder Joint ◽  
Thermal Cycling ◽  
Failure Criteria ◽  
Lead Free ◽  
Aging Effects ◽  
Solder Joint Reliability ◽  
Reliability Models ◽  
Joint Reliability ◽  
Free Solder

The microstructure, mechanical response, and failure behavior of lead free solder joints in electronic assemblies are constantly evolving when exposed to isothermal aging and/or thermal cycling environments. Traditional finite element based predictions for solder joint reliability during thermal cycling accelerated life testing are based on solder constitutive equations (e.g. Anand viscoplastic model) and failure models (e.g. energy dissipation per cycle model) that do not evolve with material aging. Thus, there will be significant errors in the calculations with lead free SAC alloys that illustrate dramatic aging phenomena. In this research, we have developed a new reliability prediction procedure that utilizes constitutive relations and failure criteria that incorporate aging effects, and then validated the new approach through correlation with thermal cycling accelerated life testing experimental data. As a part of this work, a revised set off Anand viscoplastic stress-strain relations for solder have been developed that included material parameters that evolve with the thermal history of the solder material. The effects of aging on the nine Anand model parameters have been determined as a function of aging temperature and aging time, and the revised Anand constitutive equations with evolving material parameters have been implemented in commercial finite element codes. In addition, new aging aware failure criteria have been developed based on fatigue data for lead free solder uniaxial specimens that were aged at elevated temperature for various durations prior to mechanical cycling. Using the measured fatigue data, mathematical expressions have been developed for the evolution of the solder fatigue failure criterion constants with aging, both for Coffin-Manson (strain-based) and Morrow-Darveaux (dissipated energy based) type fatigue criteria. Similar to the findings for mechanical/constitutive behavior, our results show that the failure data and associated fatigue models for solder joints are affected significantly by isothermal aging prior to cycling. After development of the tools needed to include aging effects in solder joint reliability models, we have then applied these approaches to predict reliability of PBGA components attached to FR-4 printed circuit boards that were subjected to thermal cycling. Finite element modeling was performed to predict the stress-strain histories during thermal cycling of both non-aged and aged PBGA assemblies, where the aging at constant temperature occurred before the assemblies were subjected to thermal cycling. The results from the finite element calculations were then combined with the aging aware fatigue models to estimate the reliability (cycles to failure) for the aged and non-aged assemblies. As expected, the predictions show significant degradations in the solder joint life for assemblies that had been pre-aged before thermal cycling. To validate our new reliability models, an extensive test matrix of thermal cycling reliability testing has been performed using a test vehicle incorporating several sizes of fine pitch PBGA daisy chain components. Before thermal cycling began, the assembled test boards were divided up into test groups that were subjected to several sets of aging conditions (preconditioning) including different aging temperatures (T = 25, 55, 85 and 125 C) and different aging times (no aging, and 6 and 12 months). After aging, the assemblies were subjected to thermal cycling (−40 to +125 C) until failure occurred. As with the finite element predictions, the Weibull data failure plots have demonstrated that the thermal cycling reliabilities of pre-aged assemblies were significantly less than those of non-aged assemblies. Good correlation was obtained between our new reliability modeling procedure that includes aging and the measured solder joint reliability data.

Sign in / Sign up

Export Citation Format

Share Document