scholarly journals Three-dimensional Printing of Customized Bioresorbable Airway Stents

2020 ◽  
Author(s):  
Nevena Paunović ◽  
Yinyin Bao ◽  
Fergal Brian Coulter ◽  
Kunal Masania ◽  
Anna Karoline Geks ◽  
...  

AbstractCentral airway obstruction is a life-threatening disorder causing a high physical and psychological burden to patients due to severe breathlessness and impaired quality of life. Standard-of-care airway stents are silicone tubes, which cause immediate relief, but are prone to migration, especially in growing patients, and require additional surgeries to be removed, which may cause further tissue damage. Customized airway stents with tailorable bioresorbability that can be produced in a reasonable time frame would be highly needed in the management of this disorder. Here, we report poly(D,L-lactide-co-ε-caprolactone) methacrylate blends-based biomedical inks and their use for the rapid fabrication of customized and bioresorbable airway stents. The 3D printed materials are cytocompatible and exhibit silicone-like mechanical properties with suitable biodegradability. In vivo studies in healthy rabbits confirmed biocompatibility and showed that the stents stayed in place for 7 weeks after which they became radiographically invisible. The developed biomedical inks open promising perspectives for the rapid manufacturing of the customized medical devices for which high precision, tuneable elasticity and predictable degradation are sought-after.

2021 ◽  
Vol 7 (6) ◽  
pp. eabe9499
Author(s):  
Nevena Paunović ◽  
Yinyin Bao ◽  
Fergal Brian Coulter ◽  
Kunal Masania ◽  
Anna Karoline Geks ◽  
...  

Central airway obstruction is a life-threatening disorder causing a high physical and psychological burden to patients. Standard-of-care airway stents are silicone tubes, which provide immediate relief but are prone to migration. Thus, they require additional surgeries to be removed, which may cause tissue damage. Customized bioresorbable airway stents produced by 3D printing would be highly needed in the management of this disorder. However, biocompatible and biodegradable materials for 3D printing of elastic medical implants are still lacking. Here, we report dual-polymer photoinks for digital light 3D printing of customized and bioresorbable airway stents. These stents exhibit tunable elastomeric properties with suitable biodegradability. In vivo study in healthy rabbits confirmed biocompatibility and showed that the stents stayed in place for 7 weeks after which they became radiographically invisible. This work opens promising perspectives for the rapid manufacturing of the customized medical devices for which high precision, elasticity, and degradability are sought.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Weixian Xi ◽  
Vishal Hegde ◽  
Stephen D. Zoller ◽  
Howard Y. Park ◽  
Christopher M. Hart ◽  
...  

AbstractImplant related infections are the most common cause of joint arthroplasty failure, requiring revision surgeries and a new implant, resulting in a cost of $8.6 billion annually. To address this problem, we created a class of coating technology that is applied in the operating room, in a procedure that takes less than 10 min, and can incorporate any desired antibiotic. Our coating technology uses an in situ coupling reaction of branched poly(ethylene glycol) and poly(allyl mercaptan) (PEG-PAM) polymers to generate an amphiphilic polymeric coating. We show in vivo efficacy in preventing implant infection in both post-arthroplasty infection and post-spinal surgery infection mouse models. Our technology displays efficacy with or without systemic antibiotics, the standard of care. Our coating technology is applied in a clinically relevant time frame, does not require modification of implant manufacturing process, and does not change the implant shelf life.


Blood ◽  
2011 ◽  
Vol 118 (21) ◽  
pp. 4995-4995
Author(s):  
Armin Maier ◽  
Monika Engelhardt ◽  
Heinz-Herbert Fiebig ◽  
Julia Schüler

Abstract Abstract 4995 Introduction: Leukemia and lymphoma account for a notable proportion of cancers worldwide. The heterogeneity and biological characteristics of hematological malignancies induce unique therapeutic challenges. It is well known that pluripotent as compared to differentiated cells possess the potential for anchorage independent growth in semisolid medium. This can be monitored via clonogenic or colony formation assays, in which cells grow in vitro in a three-dimensional (3D) manner without adherence to plastic culture material support. These assays can be utilized to evaluate growth and drug sensitivity of tumor stem and progenitor cells (Fiebig HH et al. Eur J Cancer 40:802, 2004). In addition, these 3D cell culture assays often mimic the in vivo scenario better than 2D cell culture assays with adherent tumor cells. Material and methods: For our ex vivo anti-tumor efficacy profiling using clonogenic assays, we established a panel of 20 hematological cell lines comprising different entities like acute lymphoblastic leukemia (ALL, 4 cell lines), acute myeloid leukemia (AML, 6 cell lines), chronic myeloid leukemia (CML, 5 cell lines), Hodgkin- (1 cell line) and non-Hodgkin-lymphoma (NHL, 3 cell lines), as well as multiple myeloma (MM, 3 cell lines). Tumor cells were injected into the flanks of NOD/SCID mice in order to obtain subcutaneous tumor xenografts, which were kept at low passages (n <3). These xenografts served as starting material either to prepare single cell suspensions for ex vivo analysis, or to carry out in vivo efficacy tests using either subcutaneous or disseminated growing tumor xenografts. Results: Twenty-four standard of care agents were tested in terms of their ex vivo chemosensitivity (e.g. cytarabine, cyclophosphamide, dexamethasone, doxorubicin, etoposide, melphalan, prednisolone, vincristine), including selected targeted drugs also (e.g. bortezomib, imatinib, nilotinib, sorafenib). The drugs showed diverse patterns of selectivity and potency: vincristine, doxorubicin and cytarabine, but also the proteasome inhibitor bortezomib exhibited pronounced activity with IC50 values in the nanomolar range (mean IC50 = 1 – 100nM), not only in their respective clinical application, but also in various other tumor entities, such as in ALL and AML with use of bortezomib. Differential activity was determined e.g. for prednisolone and dexamethasone, which were active in a micromolar range (mean IC50 = 22 – 58μM) in the ALL cell lines CCRF-CEM and MOLT-4, AML cell lines NOMO-1, NHL DAUDI and U-937, as well as the MM cell line IM-9. All-trans-retinoic acid (mean IC50 = 1.3μM) as well as interferon-gamma-1b (mean IC50 = 0.43 μM) showed specific activity patterns with pronounced growth inhibition in AML (3/6 tested AML cell lines: KG-1, NOMO-1, OCI-AML2), but also in CML (1/5 tested CML cell lines: EM-2) and MM (1/3 tested MM cell lines: L-363). The strong correlation of both tyrosine kinase inhibitors imatinib and nilotinib (spearman coefficient: 0.73, p <0.001) and their differential activity restricted to bcr-abl-positive cells served as a positive control for the implemented test system. In vivo follow-up testing in defined tumor xenografts confirmed the results obtained ex vivo. For example, cyclophosphamide that showed strong antitumor activity with use of the NHL cell line DAUDI via clonogenic assay (IC50 = 0.3μM), also induced tumor remissions of 80% in xenografts with subcutaneously growing DAUDI cells as compared to untreated control animals. Moreover, an exceedingly promising antitumor activity of sorafenib in AML cells assessed via clonogenic assay (mean IC50 0.84μM in AML cells vs. mean IC50 4.0μM over all tested entities) could be confirmed in the disseminated in vivo model using HL-60 cells (reduction of 99% vs. untreated control; Schueler J. et al. Blood 116 (21):2141, 2010). Conclusions: The presented panel screen using clonogenic assays is of great value for time and cost effective profiling of traditional cytotoxic as well as new targeted anti-cancer agents which can be confirmed in tumor models of hematological malignancies and can thereby guide to more effectively designed in vivo experiments. Diverse activity and resistance patterns ex vivo and in vivo also contribute to create clinical development strategies of standard and novel compounds. Disclosures: No relevant conflicts of interest to declare.


2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Xuezhi Lin ◽  
Xingling Xiao ◽  
Yimeng Wang ◽  
Cheng Gu ◽  
Canbin Wang ◽  
...  

Treatment of acetabular fractures is challenging, not only because of its complicated anatomy but also because of the lack of fitting plates. Personalized titanium alloy plates can be fabricated by selective laser melting (SLM) but the biocompatibility of these three-dimensional printing (3D-printed) plates remains unknown. Plates were manufactured by SLM and their cytocompatibility was assessed by observing the metabolism of L929 fibroblasts incubated with culture medium extracts using a CCK-8 assay and their morphology by light microscopy. Allergenicity was tested using a guinea pig maximization test. In addition, acute systemic toxicity of the 3D-printed plates was determined by injecting extracts from the implants into the tail veins of mice. Finally, the histocompatibility of the plates was investigated by implanting them into the dorsal muscles of rabbits. The in vitro results suggested that cytocompatibility of the 3D-printed plates was similar to that of conventional plates. The in vivo data also demonstrated histocompatibility that was comparable between the two manufacturing techniques. In conclusion, both in vivo and in vitro experiments suggested favorable biocompatibility of 3D-printed titanium alloy plates, indicating that it is a promising option for treatment of acetabular fractures.


2015 ◽  
Vol 116 (3) ◽  
pp. 485-486 ◽  
Author(s):  
Terry Bauch ◽  
Pugazhendhi Vijayaraman ◽  
Gopi Dandamudi ◽  
Kenneth Ellenbogen

2018 ◽  
Vol 62 (10) ◽  
Author(s):  
Yanan Zhao ◽  
Min Hee Lee ◽  
Padmaja Paderu ◽  
Annie Lee ◽  
Cristina Jimenez-Ortigosa ◽  
...  

ABSTRACT APX001 is a first-in-class, intravenous and orally available, broad-spectrum antifungal agent in clinical development for the treatment of life-threatening invasive fungal infections. The half-life of APX001A, the active moiety of APX001, is significantly shorter in mice than in humans (1.4 to 2.75 h in mice versus 2 to 2.5 days in humans), making the exploration of efficacy in mouse models difficult. After pretreatment with 1-aminobenzotriazole (ABT), a nonspecific cytochrome P450 inhibitor, greatly increased plasma APX001A exposure was observed in mice of different strains and of both genders. As a consequence, 26 mg/kg APX001 plus ABT sterilized kidneys in mice infected with Candida albicans, while APX001 alone at the same dose resulted in a modest burden reduction of only 0.2 log10 CFU/g, relative to the vehicle control. In the presence of ABT, 2 days of once-daily dosing with APX001 at 26 mg/kg also demonstrated significant in vivo efficacy in the treatment of Candida glabrata infections in mice. Potent kidney burden reduction was achieved in mice infected with susceptible, echinocandin-resistant, or multidrug-resistant strains. In contrast, the standard of care (micafungin) was ineffective in treating infections caused by the resistant C. glabrata isolates.


Author(s):  
Simon W Partridge ◽  
Matthew J Benning ◽  
Matthew J German ◽  
Kenneth W Dalgarno

This article describes a proof of concept study designed to evaluate the potential of an in vivo three-dimensional printing route to support minimally invasive repair of the musculoskeletal system. The study uses a photocurable material to additively manufacture in situ a model implant and demonstrates that this can be achieved effectively within a clinically relevant timescale. The approach has the potential to be applied with a wide range of light-curable materials and with development could be applied to create functionally gradient structures in vivo.


Sign in / Sign up

Export Citation Format

Share Document