scholarly journals FORMATION OF BONE TISSUE IN CULTURE FROM ISOLATED BONE CELLS

1974 ◽  
Vol 61 (2) ◽  
pp. 427-439 ◽  
Author(s):  
Itzhak Binderman ◽  
Dan Duksin ◽  
Arieh Harell ◽  
Ephraim Katzir (Katchalski) ◽  
Leo Sachs

A system is described for the formation of bone tissue in culture from isolated rat bone cells. The isolated bone cells were obtained from embryonic rat calvarium and periosteum or from traumatized, lifted periosteum of young rats. The cells were cultured for a period of up to 8 wk, during which time the morphological, biochemical, and functional properties of the cultures were studied. Formation of bone tissue by these isolated bone cells was shown, in that the cells demonstrated osteoblastic morphology in light and electron microscopy, the collagen formed was similar to bone collagen, there was mineralization specific for bone, and the cells reacted to the hormone calcitonin by increased calcium ion uptake. Calcification of the fine structure of the cells and the matrix is described. Three stages in the calcification process were observed by electron microscopy. It is concluded that these bone cells growing in vitro are able to function in a way similar to such cells in vivo. This tissue culture system starting from isolated bone cells is therefore suitable for studies on the structure and function of bone.

2022 ◽  
Vol 5 (1) ◽  
pp. 8
Author(s):  
Giorgia Borciani ◽  
Giorgia Montalbano ◽  
Nicola Baldini ◽  
Chiara Vitale-Brovarone ◽  
Gabriela Ciapetti

New biomaterials and scaffolds for bone tissue engineering (BTE) applications require to be tested in a bone microenvironment reliable model. On this assumption, the in vitro laboratory protocols with bone cells represent worthy experimental systems improving our knowledge about bone homeostasis, reducing the costs of experimentation. To this day, several models of the bone microenvironment are reported in the literature, but few delineate a protocol for testing new biomaterials using bone cells. Herein we propose a clear protocol to set up an indirect co-culture system of human-derived osteoblasts and osteoclast precursors, providing well-defined criteria such as the cell seeding density, cell:cell ratio, the culture medium, and the proofs of differentiation. The material to be tested may be easily introduced in the system and the cell response analyzed. The physical separation of osteoblasts and osteoclasts allows distinguishing the effects of the material onto the two cell types and to evaluate the correlation between material and cell behavior, cell morphology, and adhesion. The whole protocol requires about 4 to 6 weeks with an intermediate level of expertise. The system is an in vitro model of the bone remodeling system useful in testing innovative materials for bone regeneration, and potentially exploitable in different application fields. The use of human primary cells represents a close replica of the bone cell cooperation in vivo and may be employed as a feasible system to test materials and scaffolds for bone substitution and regeneration.


2020 ◽  
Vol 35 (Supplement_3) ◽  
Author(s):  
Julie Williams ◽  
Sanlin Robinson ◽  
Babak Alaei ◽  
Kimberly Homan ◽  
Maryam Clausen ◽  
...  

Abstract Background and Aims Questions abound regarding the translation of in vitro 2D cell culture systems to the human setting. This is especially true of the kidney in which there is a complex hierarchical structure and a multitude of cell types. While it is well accepted that extracellular matrix plays a large part in directing cellular physiology emerging research has highlighted the importance of shear stresses and flow rates too. To fully recapitulate the normal gene expression and function of a particular renal cell type how important is it to completely reconstitute their in vivo surroundings? Method To answer this question, we have cultured proximal tubular (PT) epithelial cells in a 3-dimensional channel embedded within an engineered extracellular matrix (ECM) under physiological flow that is colocalised with an adjacent channel lined with renal microvascular endothelial cells that mimic a peritubular capillary. Modifications to the system were made to allow up to 12 chips to be run in parallel in an easily handleable form. After a period of maturation under continuous flow, both cell types were harvested for RNAseq analyses. RNA expression data was compared with cells cultured under static 2-dimensional conditions on plastic or the engineered ECM. Additionally, the perfusion of glucose through this 3D vascularised PT model has been investigated in the presence and absence of known diabetes modulating agents. Results PCA of RNAseq data showed that a) static non-coated, b) static matrix-coated and c) flow matrix-coated conditions separated into 3 distinct groups, while cell co-culture had less impact. Analysis of transcriptomic signatures showed that many genes were modulated by the matrix with additional genes influenced under flow conditions. Several of these genes, classified as transporters, are of particular importance when using this model to assess drug uptake and safety implications. Co-culture regulated some interesting genes, but fewer than anticipated. Preliminary experiments are underway to monitor glucose uptake and transport between tubules under different conditions. Conclusion We have developed a medium throughput system in which matrix and flow modulate gene expression. This system can be used to study the physiology of molecular cross-talk between cells. Ongoing analysis will further consider relevance to human physiology.


1990 ◽  
Vol 259 (4) ◽  
pp. G564-G570 ◽  
Author(s):  
S. Arvidsson ◽  
K. Carter ◽  
A. Yanaka ◽  
S. Ito ◽  
W. Silen

The effects of intracellular acidosis induced by acidification of the basolateral (nutrient) perfusate on the structure and function of the oxynticopeptic cell were studied in in vitro frog gastric mucosa. Changing the pH of the unbuffered nutrient perfusate (UNB) from 7.2 to 3.5 acidified the oxynticopeptic cell with no change in potential difference (PD) or resistance (R). Intracellular pH (pHi), PD, and R were 7.05 +/- 0.01, 16 +/- 1 mV, 165 +/- 7 omega.cm2 before and 6.44 +/- 0.01, 16 +/- 2 mV, 170 +/- 9 omega.cm2 after nutrient acidification. Acid secretion (H+) increased from 0.86 +/- 0.07 to 1.88 +/- 0.18 mu eq.cm-2.h-1. Addition of forskolin to tissues perfused with nutrient pH (pHn) 3.5 decreased PD to 2 +/- 2 mV and further increased H+ to 3.07 +/- 0.19 mu eq.cm-2.h-1. By light and electron microscopy oxynticopeptic cells perfused with UNB, pHn 3.5, appeared normal. Oxynticopeptic cells in tissues pretreated with omeprazole and then exposed to UNB, pHn 3.5, had extensive morphological damage. On increasing the pH of the nutrient perfusate from 3.5 to 7.2 there was prompt recovery of pHi in untreated and forskolin-stimulated mucosae (pHi 6.87 +/- 0.06 and 6.85 +/- 0.04) but no recovery of pHi in tissues pretreated with omeprazole or cimetidine (pHi 6.26 +/- 0.04 and 6.44 +/- 0.06, n = 6, 30 min after reexposure to UNB, pHn 7.2). We conclude that in a secreting mucosa intracellular acidification of the oxynticopeptic cell to pHi 6.4 is associated with normal morphology, PD, R, and increased H+, and that intracellular acidosis is not de facto deleterious.


2014 ◽  
Vol 783-786 ◽  
pp. 72-77 ◽  
Author(s):  
Takayoshi Nakano ◽  
Aira Matsugaki ◽  
Takuya Ishimoto ◽  
Mitsuharu Todai ◽  
Ai Serizawa ◽  
...  

Bone microstructure is dominantly composed of anisotropic extracellular matrix (ECM) in which collagen fibers and epitaxially-oriented biological apatite (BAp) crystals are preferentially aligned depending on the bone anatomical position, resulting in exerting appropriate mechanical function. The regenerative bone in bony defects is however produced without the preferential alignment of collagen fibers and the c-axis of BAp crystals, and subsequently reproduced to recover toward intact alignment. Thus, it is necessary to produce the anisotropic bone-mimetic tissue for the quick recovery of original bone tissue and the related mechanical ability in the early stage of bone regeneration. Our group is focusing on the methodology for regulating the arrangement of bone cells, the following secretion of collagen and the self-assembled mineralization by oriented BAp crystallites. Cyclic stretching in vitro to bone cells, principal-stress loading in vivo on scaffolds, step formation by slip traces on Ti single crystal, surface modification by laser induced periodic surface structure (LIPSS), anisotropic collagen substrate with the different degree of orientation, etc. can dominate bone cell arrangement and lead to the construction of the oriented ECM similar to the bone tissue architecture. This suggests that stress/strain loading, surface topography and chemical anisotropy are useful to produce bone-like microstructure in order to promote the regeneration of anisotropic bone tissue and to understand the controlling parameters for anisotropic osteogenesis induction.


Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 905 ◽  
Author(s):  
Francesca Donnaloja ◽  
Emanuela Jacchetti ◽  
Monica Soncini ◽  
Manuela T. Raimondi

Bone tissue is the structural component of the body, which allows locomotion, protects vital internal organs, and provides the maintenance of mineral homeostasis. Several bone-related pathologies generate critical-size bone defects that our organism is not able to heal spontaneously and require a therapeutic action. Conventional therapies span from pharmacological to interventional methodologies, all of them characterized by several drawbacks. To circumvent these effects, tissue engineering and regenerative medicine are innovative and promising approaches that exploit the capability of bone progenitors, especially mesenchymal stem cells, to differentiate into functional bone cells. So far, several materials have been tested in order to guarantee the specific requirements for bone tissue regeneration, ranging from the material biocompatibility to the ideal 3D bone-like architectural structure. In this review, we analyse the state-of-the-art of the most widespread polymeric scaffold materials and their application in in vitro and in vivo models, in order to evaluate their usability in the field of bone tissue engineering. Here, we will present several adopted strategies in scaffold production, from the different combination of materials, to chemical factor inclusion, embedding of cells, and manufacturing technology improvement.


1991 ◽  
Vol 252 ◽  
Author(s):  
Reynaldo Todescan ◽  
Johne E. Davies

ABSTRACTUsing both in vivo and in vitro experiments we have demonstrated that: reconstituted collagen will undergo mineralization in a healing bony compartment; that this mineralization is the result of spontaneous precipitation of calcium salts due to the presence of alkaline phosphatase produced by the bone cells, and that once calcified, the collagen will undergo cellular resorption by tartrate-resistant multi-nucleate giant cells similar to osteoclasts. This sequence of events is quite different to that in the supra-bony soft-tissue compartment where no calcification of the collagen is apparent, the collagen matrix becomes infiltrated with fibroblast-like cells and little resorption of the matrix occurs during implantation.We conclude that reconstituted collagen may be employed as both a tissue barrier, enhancing guided tissue regeneration, and a bone-substitute material, which becomes replaced by natural bone tissue.


Author(s):  
Sardar M. Zia Uddin ◽  
Yi-Xian Qin

Microgravity (MG) during space flight has been known to cause adverse effect on bone quality. Data collected from studies done on spaceflights show loss of 1–1.6% bone mineral density (BMD) per space-flight-month[1]. Most BMD has been recorded in load-bearing bones [2]. Some studies has considered using drugs and different growth factors to maintain bone mass in microgravity conditions but it can be too expensive to maintain over longer periods of time besides the systematic effects of such treatments [3]. Considering the effects of microgravity are partially attributed to lack of mechanical force on bone tissue, which alters gene expression, reduction in transcription factors and growth factors. Furthermore, lack of gravity effects cell growth, proliferation, differentiation, cytoskeleton polymerization and cellular morphology [4, 5]. Thus to reverse these adverse effects on bone physiology, it is important to provide cells with mechanical stimulus which can provide essential mechanical signal for cells to counter the effects of microgravity. Ultrasound acoustic vibrations can be readily applied in, in vivo and human studies and has shown anabolic effects on osteopenic bone tissue [6]. Furthermore, ultrasound is a non-invasive and more target specific treatment relative to cyclic strain and vibration. The objective of this study is to see effects of low intensity pulsed ultrasound (LIPUS) on disused bone model and osteogenic activity of osteoblast cells cultures in simulated microgravity. This will help us understand that effects of ultrasound on microgravity and mechanotransduction pathway responsible for anabolic effect on bone cells.


1963 ◽  
Vol 17 (3) ◽  
pp. 597-607 ◽  
Author(s):  
Elliott W. Strauss

Everted sacs of intestine from golden hamsters were incubated at 37°C for at least 1 hour in vitro with emulsified lipid after removal of both pancreatic lipase and bile salts. The fine structure of intestinal epithelium is well preserved under these conditions. Absorption of fat by the intestinal mucosa in vitro closely resembles lipid absorption in vivo, as observed by both light and electron microscopy. The physiological significance of these observations is discussed. Tubular elements of the agranular endoplasmic reticulum are often strikingly abundant in the apical cytoplasm of intestinal absorptive cells. These have a role in the intracellular transport of fat since they frequently contain droplets of lipid derived from the incubation medium. The rate of fat accumulation in the epithelium appears to be proportional to the concentration in the medium.


1976 ◽  
Vol 68 (2) ◽  
pp. 319-338 ◽  
Author(s):  
P J Oates ◽  
O Touster

Fusion of phagolysosomes (PLs) has been demonstrated to occur in vitro. Two separate cell homogenates of the ameba Acanthamoeba sp. (Neff) were prepared, each rich in PLs labeled with distinctive particulate markers. Portions of each were incubated together in vitro and fusion occurred as evidenced by the appearance of PLs containing both types of markers. Fusion was confirmed by electron microscopy, including serial sectioning. The membranes of fused vacuoles excluded the dye eosin Y. Surviving cells in the homogenates were not responsible for the observed fusion. Fusion was obtained using either synthetic markers (polystyrene and polyvinyltoluene latex) or biological markers (autoclaved yeast cells and glutaraldehyde-fixed goat red blood cells), or a combination of both. The specificity of PL fusion in vivo appeared to be maintained in vitro. As determined by light and electron microscopy, the fusion reaction was dependent on time and temperature, and on the initial presence of membrane around both marker particles. A minimum of 10% of the vacuoles fused by 10 min of incubation at 30 degrees C, and no rupture of the vacuoles was detected during this time. After 10 min of incubation, vacuole rupture began and fusion ceased. At a constant initial vacuole concentration, the extent of PL fusion in vitro was quantitatively reproducible. This appears to be a promising system for further investigation of membrane fusion in the lysosomal system.


Sign in / Sign up

Export Citation Format

Share Document