Fibre production by beef cows

2010 ◽  
Vol 50 (6) ◽  
pp. 568
Author(s):  
B. A. McGregor ◽  
J. F. Graham

Cattle grow and shed fibre which assists them adapt to seasonal changes in the environment. In the absence of cattle fibre production data for southern Australia, Angus, Hereford, Simmental and Limousin cows and crosses between these breeds grazing perennial pastures at Hamilton, Victoria were sampled in late winter. The fibre-growing area on the sides of cattle was measured, fibre sampled at the mid-side site and the sampling area determined. Fibre was tested for fibre diameter distribution, clean washing yield and fibre length measured. Cows were 3–7 years of age, liveweights were 412–712 kg and the mean fibre-growing area was 2.2 m2. This produced an average 682 g of total fibre (range 346–1175 g). The mean fibre diameter of all fibres was 51.7 µm (range 43–62 µm) and 18% of fibres were <36 µm (range 6–39%). The clean washing yield was 92.4% (range 87.4–95.8%). Fibre length averaged 21 mm. Increasing the age, liveweight and condition score of cows and increasing weight of clean fibre were associated with significant increases in mean fibre diameter. Breed of cattle did not affect fibre production (P > 0.1) but did affect mean fibre diameter (P < 0.05). The quantity of fibre production indicates potential for low value textile production. The high level of total fibre production, twice that of an earlier report, and fibre shedding from cattle suggests that white fibre-producing animals such as Merino sheep, Angora and cashmere goats and alpaca should avoid using cattle-handling facilities, particularly in the month before shearing.

1958 ◽  
Vol 9 (6) ◽  
pp. 802 ◽  
Author(s):  
RB Dun

The components of clean fleece weight were examined in five experimental flocks of medium-wool Peppin Merinos. Four single-character selection groups – clean fleece weight plus, clean fleece weight minus, crimps per inch plus, and crimps per inch minus – were examined by measuring fleece production in 18-month-old ewe progeny. Measurements were also made on progeny from the "nucleus" flock, which was selected for clean fleece weight with subsidiary selection for crimps per inch and against fold score. Data were collected in 1952 and 1954. The 1954 figures were obtained from a nutrition experiment in which sheep mere grown from weaning to 18 months on a high and on a low plane of nutrition. The mean measurements of the components of clean fleece weight (W) were compared between flocks using the "percentage deviation" technique. Four comparisons were made: (1) Nucleus/Fleece minus; (2) Fleece plus/Fleece minus; (3) Crimps minus/Crimps plus; (4) high nutritional plane/low nutritional plane. In comparisons (1) , (2), and (3), difference in weight of wool per unit area of skin (w) accounted for nearly all the difference in W. Body weight (S) made a small contribution while difference in fold score (R) was negligible. Fibre density (N) accounted for +86 per cent., and fibre cross-sectional area (A) for –28 per cent., of the difference in W in comparison (1). In comparison (2) the figures were N +47 per cent., A +21 per cent., while the figures for comparison (3) were N –26 per cent., A +121 per cent. The increase in fleece weight was invariably accompanied by a decrease in crimps per inch. In all three comparisons primary density (P) was the major cause of change in N. Fibre length (L) made a uniform contribution of approximately +15 per cent. in the three comparisons.The relative importance of the components of fleece weight was similar at both high and low levels of nutrition.The effect of a high level of nutrition was to produce large increases in A, L, and S. The increase in S was compensated by an equal decrease in P. The increase in fibre diameter was not associated with any change in crimps per inch.


2014 ◽  
Vol 26 (1) ◽  
pp. 118 ◽  
Author(s):  
M. Re ◽  
J. J. de la Mata ◽  
G. A. Bo

Several studies, performed mainly in North America, have shown that the 5-day co-synch timed-AI (TAI) protocol results in similar or higher pregnancy rates than conventional 7-day co-synch protocols in beef cows and beef and dairy heifers. It is hypothesised that the 5-day co-synch protocol reduces the incidence of persistent follicles and provides for a longer proestrus, with increasing oestradiol concentrations due to continuous gonadotropin support for the dominant follicle (Bridges et al. 2008 Theriogenology 69, 843–851). Similar findings have been reported recently following the use of a shortened oestradiol-based protocol that also provides for a longer proestrus (named J-synch; de la Matta and Bo 2012 Taurus 55, 17–23). A study was designed to compare these 2 treatment protocols for synchronization of ovulation that allow for a prolonged proestrus with the conventional oestradiol-based protocol currently used for TAI in South America for heifers. Cycling Holstein heifers that were, on average, 17 months of age, weighting 350 to 380 kg, and with a body condition score of 2.5 to 3.5 (scale of 1 to 5), were randomly allocated to 1 of 3 treatment groups. Heifers in the 7-day estradiol benzoate (EB) group received a progesterone device (DIB 1 g of progesterone; Syntex SA, Buenos Aires, Argentina) and 2 mg EB (oestradiol benzoate, Syntex SA) on Day 0, 500 μg of cloprostenol (prostaglandin F2α; Sincronil, Proagro SA, Argentina) and DIB removal on Day 7, 1 mg of EB on Day 8, and TAI 30 h later (54 h after DIB removal). Heifers in the J-synch group received a DIB and 2 mg of EB on Day 0, PGF and DIB removal on Day 6, and 10 μg of buserelin acetate [gonadotropin-releasing hormone (GnRH); Receptal, Intervet, Millsboro, MD, USA] and TAI on Day 8 (72 h later). Heifers in the 5-day co-synch group received a DIB and GnRH on Day 0, DIB removal and prostaglandin F2α (twice, 12 h apart) on Day 5, and GnRH along with TAI on Day 8 (72 h later). Treatments were coordinated so that DIB were removed in all groups at the same time to decrease a possible time effect of follicle parameters and pregnancy rates. Two experiments were conducted; the first evaluated follicular dynamics and ovulation rates by twice daily ultrasonography (Honda 101 V, 5.0 MHz) in 20 heifers per group and the second determined pregnancy rates to TAI in 172 heifers. The mean (± standard error of the mean) interval from DIB removal to ovulation was shorter in the 7-day EB group (82.7 ± 3.1 h) than in the J-synch (103.8 ± 3.3 h) and 5-day co-synch (96.8 ± 3.3 h) groups (P = 0.01). However, the mean diameter of the dominant preovulatory follicle was smaller (P = 0.01) in the 7-day EB (12.8 ± 0.5 mm) and the J-synch (13.1 ± 0.6 mm) groups than in the 5-day co-synch group (14.9 ± 0.6 mm). Although pregnancy rates in the second experiment were numerically lower in the 7-day EB group (31/58; 53.4%) and 5-day co-synch group (30/55; 54.5%) than in the J-synch group (37/59; 62.7%), differences were not significant (P > 0.3). Preliminary results indicate that the 3 protocols evaluated result in comparable pregnancy rates to TAI in dairy heifers.


1983 ◽  
Vol 37 (3) ◽  
pp. 353-363 ◽  
Author(s):  
S. H. Somerville ◽  
B. G. Lowman ◽  
R. A. Edwards ◽  
G. Jolly

ABSTRACTHereford ♂ × British Friesian ♀ cows that had calved in September/October and were suckling mainly Charolais ♂ × calves were offered individually one of three planes of nutrition based on their estimated maintenance requirement during their first 150 days of lactation.The mean daily intakes of metabolizable energy were 95·8, 71·5 and 52·1 MJ for the high, medium and low planes of nutrition respectively. Data were collected from 122 lactations. The mean 150-day cumulative milk yields of the cows were 1 355, 1 258 and 1 187 kg for the high, medium and low planes of nutrition respectively (P < 0·001). A i-kg increase in calf birth weight was associated with an increase in 150-day cumulative milk yield of 14·7 ± 2·17 kg (P < 0·001). Losses in live weight and condition score were significantly greater for cows given the low plane of nutrition during lactation (P < 0001).Although there was a significant (P < 0·01) positive correlation between the growth rate of the calves and their dams' nutritional level during the winter there was evidence of compensatory growth at grass, since by the time of weaning in August, the plane of nutrition of the dam during the winter had no significant effect on the weight of the calves.The experiment demonstrates that energy-deficient beef cows will attempt to maintain milk production at the expense of body reserves and that when supplementary solid food is made available to the suckled calves, their weaning weights are unaffected by the plane of nutrition of the dam during the winter.


1979 ◽  
Vol 93 (1) ◽  
pp. 195-201 ◽  
Author(s):  
R. A. Guirgis

SUMMARYIn a study of two coarse-wool breeds (Awassi and Hamdani) the birthcoat and adult fleece were sampled from six body positions. Mean fibre diameter, mean fibre length, mean staple length and the percentages of fibre types were studied in relation to the birthcoat fibre type arrays.The birthcoat of the two coarse wool breeds showed only plateau and saddle fibre type arrays. In Awassi lambs, plateau arrays were all P3 type whereas in Hamdani 28·6% of the plateau arrays were Po and the rest were P3 indicating a stronger base in the latter. S/P ratios, calculated from fibre types, were 2·22 and 2·27, at birth, and 3·56 and 2·93 at 4–8 weeks of age, in Awassi and Hamdani respectively. Awassi birthcoats showed more precipice within the CT group than those of Hamdani and plateau arrays were more endowed with the precipice than were saddle arrays.A composite sample from the back and mid-side, in Awassi, and from the back and britch, in Hamdani, was found to be most representative of the birthcoat fibre types.In the adult fleece of the Awassi breed, the mean fibre length following plateau arrays exceeded those following saddle arrays.In Hamdani, the saddle arrays developed into coarser fibres in average diameter than those of plateau arrays whereas in Awassi no difference occurred. Awassi plateau arrays were followed by higher within-staple variability in distribution of fibre length than were saddle arrays, whereas in the distribution of fibre diameter there was no difference. In Hamdani, however, saddle arrays were followed by slightly higher within-stable variability in both length and diameter than were plateau arrays.Birthcoat samples that had a transition in the CT group or had saddle array developed into adult fleeces with greater frequency of normal distribution in both fibre length and diameter, within staple. Adult fleeces that showed frequent bimodal distribution of both diameter and length, within staple, were those with birthcoats that had a precipice in length, or in coarseness and length, within their CT group or those with birthcoats that had plateau arrays.


1972 ◽  
Vol 52 (4) ◽  
pp. 671-679 ◽  
Author(s):  
E. E. LISTER ◽  
W. A. JORDAN ◽  
W. J. PIGDEN ◽  
J. M. WAUTHY ◽  
J. E. COMEAU

Pregnant hay-fed beef cows confined in an insulated, forced-air ventilated barn (In) and those in an open yard with access to a log barn (In–Out), gained weight from autumn to late winter (273 and 257 g/day for In and In–Out, respectively), compared with those out-of-doors with only a windbreak shelter (Out), which lost weight (−31 g/day) (P < 0.05), when all groups were adjusted by co-variance to the mean digestible energy (DE) intake for hay-fed cows. For grass silage-fed cows, the In groups gained 196 g/day, more (P < 0.05) than the In–Out (132 g/day), and In, and In–Out groups gained more (P < 0.05) than Out cows (−185 g/day) when all groups were adjusted to the mean DE intake for silage-fed groups. Estimated daily DE intake required for maternal maintenance and fetal growth for the period covered by this experiment (beginning 238–243 days, ending 59–75 days before parturition) was 3.10, 3.12, and 4.32 Mcal/100 kg initial weight (IW) for hay-fed cows In, In–Out, and Out, respectively, and 2.84, 3.00, and 3.91 Mcal/100 kg IW for silage-fed cows In, In–Out, and Out, respectively.


1978 ◽  
Vol 90 (3) ◽  
pp. 495-501 ◽  
Author(s):  
R. A. Guirgis ◽  
N. T. Kazzal ◽  
M. S. Haddadine ◽  
R. K. Abdallah

SummaryIn a study of two coarse wool breeds (Awassi and Karadi) and their reciprocal crosses, data were obtained on the mean fibre length, mean fibre diameter, fibre type ratio, medullation and on the effect of some environmental factors on these traits. Reciprocal crosses showed intermediate values, in growth rate of fibres, percentages of fibre types and medullation, between those of the parental breeds. Sex exhibited a significant effect at weaning only, on fibre length. Heterosis in fibre length, at the two ages, was small and negative. Maternal influence on fibre length was small and not significant. Fibre length in Karadi sheep showed the highest frequency of bimodal distribution whereas Awassi showed the lowest. Awassi × Karadi was closer to Karadi and Karadi × Awassi had greater affinity to Awassi in the frequency of samples showing bimodal distribution.Reciprocal crosses had larger diameter, at weaning, than those of the parental breeds. At 1 year of age they assumed an intermediate position between the pure bred parents.At weaning, the two reciprocal crosses showed a highly significant heterosis in fibre diameter; its value decreased with advancing age and it showed no significant effect at 1 year of age.Maternal influence on fibre diameter was very small and not significant.Karadi × Awassi and Karadi samples had the highest percentage of samples showing bimodal distribution of fibre diameter.Samples with bimodal distribution of both length and diameter, indicating two coats, had the highest frequency in Karadi followed by Karadi × Awassi; Awassi showed the lowest value.Percentages of fine, coarse and kemp fibres were significantly affected by breed and age of dam. Type of birth showed a significant effect only on percentage of coarse fibres.Karadi wool might be more suitable for carpet manufacturing. It excelled the other groups in the bimodal distribution of both length and diameter as well as in medullation. Cross-breeding increased the bimodality of fibre distribution.


1992 ◽  
Vol 43 (6) ◽  
pp. 1441 ◽  
Author(s):  
KL Butler ◽  
M Dolling

In sheep selection programmes where fibre diameter distribution measurements are available, such as when using the FDA method of assessing fibre diameter, spinning fineness (as defined by Anderson, S.L. (1976), J. Text. Inst., 67, 175-80) might be preferable to using mean fibre diameter as a sheep selection criteria. This paper uses a Taylor's expansion to obtain an approximation to the heritability of spinning fineness when the phenotypic and genetic parameters of only the mean and the coefficient of variation of fibre diameter are available. The approximation assumes that the mean and coefficient of variation of fibre diameter are both phenotypically and genetically independent. Approximations are also obtained for the genetic correlation between spinning fineness and mean fibre diameter, and between spinning fineness and coefficient of variation. Using the approximations, estimates of heritability of spinning fineness and of the two genetic correlations are calculated for published studies.


1992 ◽  
Vol 43 (6) ◽  
pp. 1399 ◽  
Author(s):  
RW Kelly

Eighteen farm flocks of four-tooth Merino ewes (average of 371 ewes at lamb marking, range 278 to 511) were studied in 1987/88 ( n =8 ) and 1988/89 (n=10) over the period from 2 to 4 weeks pre-joining until 12 weeks post-lambing. All farms were located in the south-west of Western Australia, and the flocks started lambing between mid-April and mid-July. The average liveweights of ewes pre-joining ranged over 40.2 to 61.8 kg, and average condition scores ranged from 2.2 to 4.2. Mean liveweight changes of the ewes ranged over losses of up to 8.5 kg to gains of up to 10.4 kg between consecutive recordings at 2 to 3 month intervals up to 12 weeks post lambing, and condition score changes ranged over minus 1.2 to plus 1.2. The greatest losses in liveweight and condition score in many flocks corresponded with the period from mid-pregnancy to marking, the time of greatest nutrient demand of the ewe. There was considerable variation between flocks in the percentage of dry ewes (2.9 to 17.7%), lambs born per ewe present at marking (83.0 to 147.3%), lambs alive per ewe present at marking (66.3 to 123.2%), and lamb deaths as a percentage of total lambs born (10.9 to 29.8%). For single and twin-born lambs, the percentage of lamb deaths between flocks ranged from 6.0 to 19.9% (mean = 11.0%) and 19.1 to 63.2% (mean = 33.1%) respectively. Of the ewes giving birth to twins, an average of 9.6% lost both lambs. The mean birthweights were 4.4 kg (range 3.6 to 5.1 kg) for singles and 4.0 kg (range 3.3 to 4.5 kg) for twins, and were highly correlated (r = 0 - 74, n = 13 flocks, P<0.01). Lamb growth to marking averaged 232 g head-1 day-1 and 205 g head-1 day-1, and from marking to weaning 198 g head-1 day-1 and 193 g head-1 day-1 for single and twin-born lambs respectively. The mortality rates of both single and twin-born lambs were highly correlated with mean liveweight of the ewes at mid-pregnancy (r = -0.64, P<0.01; r = -0.75, P<0.001; respectively). A kilogram increase in mean liveweight at mid-pregnancy was associated with declines in the mortality rates of single-born lambs of 0.7% units (s.e. = 0.23), and of twin-born lambs of 2.2% units (s.e. = 0.57). Mortality rates of the singles were highly correlated with that of twins (r = 0.86, P<0.001), with a 1% unit change in death rate of singles being associated with a 2.5% (s.e. = 0.41) unit change for twins. Mortality rates of twins were associated with mean cotyledon diameter measured in mid-pregnancy (r = -0.48, n = 13, P<0. l0), and mean umbilical resistance to blood flow (r = 0.78, n = 9, P<0.02). Growth from birth to weaning of single-born lambs was associated with the mean liveweight of the flock in mid-pregnancy (r = 0.72, P<0 .001). Clean fleece weight and mean fibre diameter of the fleeces from single.bearing and rearing ewes were correlated with mean ewe liveweight in mid-pregnancy (r = 0.56, P<0.05; r = 0.70, P<0.01; respectively). Staple strength was correlated with mean ewe liveweight at marking for both single and twin producing ewes (r = 0.72, n = 18, P<0.01; r = 0.74, n = 9, P<0.05; respectively). It was concluded that liveweight of the ewe in mid-pregnancy, which represents the sum of starting liveweight and liveweight change, is the most important single and practical criterion that can be used by a farmer to set the goals for nutritional management of the flock over pregnancy to improve lamb survival.


2020 ◽  
Vol 2 (3) ◽  
pp. 101-107
Author(s):  
David Oriabure Ekhuemelo ◽  
◽  
Vivian Ojoma Aidoko ◽  
Veronica Eyakamo Abu ◽  
◽  
...  

This study evaluated the fibre morphology of Musa balbisiana leaf, stalk and stem portions for pulp and paper production. Samples of Musa balbisiana portions were prepared and macerated in equal volume of glacial acetic acid and hydrogen peroxide in ratio 1:1. Twenty cellulose fibres from each portion were randomly selected using Reichert visopan microscope to determine the physical fibre morphology while the derived fibre indices were calculated. Data collected were subjected to one way Analysis of Variance (ANOVA). Follow up tests carried out using Duncan Multiple Range Test (DMRT). Results showed that means of fibre length, fibre diameter, cell wall thickness and lumen width ranged between 1.35 and 2.46 mm, 16.46 and 33.34 µm, 7.58 and 24.99 µm, and 3.54 and 3.56 µm, respectively. The mean values of fibre length of Musa balbisiana leaf and stalk were not significant but were significantly different from the mean values of the stem at p<0.05. The mean values of felting rate, elasticity coefficient, rigidity coefficient, Runkel ratio and F factor ranged from 84.47 to 142.43, 48.94 to 76.07%, 11.96 to 25.53%, 0.34 to 1.12 and 433.50 to 627.22, respectively. The leaf stalk of Musa balbisiana had the best Runkel ratio of 0.34 while Musa balbisiana stem had the best fibre length of 2.46 mm. Results further showed that while fibre length of stalk and stem portions of Musa balbisiana were long fibres, the leaf portion was short fibre. Runkel ratios of Musa balbisiana stalk, Leaf and stem were very good, good and poor, respectively while the Leaf, stalk and stem were elastic, high elastic and rigid fibre, respectively. In conclusion, Musa balbisiana has proved to be a very suitable non-wood, agricultural based material for pulp and paper production.


2021 ◽  
Vol 67 (No. 3) ◽  
pp. 113-124
Author(s):  
Noorollah Nazari ◽  
Mohsen Bahmani ◽  
Saleh Kahyani ◽  
Miha Humar

This study investigated the influence of site conditions on the physical and morphological properties of hawthorn (Crataegus azarolus L.) wood grown in Zagros forests of Iran. Hawthorn is a valuable woody species in Iran’s Zagros forests with data deficiency in its wood properties. To our best knowledge, there is no study on the properties of hawthorn wood. Twenty-seven mature trees were randomly chosen and sampled at three altitude levels (1 800–2 000, 2 000–2 200, and 2 200–2 400 m) in the Bazoft region of Chaharmahal Va Bakhtiari, Iran. Dry wood density, volumetric shrinkage, fibre length, fibre diameter, cell wall thickness were then determined. Multivariate analysis of variance (MANOVA) was conducted to evaluate significant differences between the mean values of studied wood properties at different altitude levels and slope classes. Moreover, the relationships between the above-mentioned properties and some site conditions (temperature, precipitation, altitude, and slope) as well as growth parameters of trees (tree height, DBH, age, crown dimensions, volume, etc.) were studied by principal component analysis (PCA). The results indicated that trees growing at the second altitude level had the highest oven-dry density values, and those at the third altitude level had the lowest ones. Results also indicated a significant effect of altitude levels on fibre length, fibre diameter, and cell wall thickness. In contrast, a significant difference was found between the mean values of fibre diameter at different slope classes. PCA indicated that altitude, precipitation, and temperature are the most important environmental site variables affecting the wood characteristics.


Sign in / Sign up

Export Citation Format

Share Document