A digital holography ex situ measurement characterization of plasma-exposed surface erosion from an electrothermal arc source

2021 ◽  
Vol 92 (3) ◽  
pp. 033517
Author(s):  
C. D. Smith ◽  
T. M. Biewer ◽  
T. Gebhart ◽  
J. Echols ◽  
C. E. Thomas
Author(s):  
Ana Veruska Cruz da Silva ◽  
Jéssica Monalisa S. P. Oliveira ◽  
Milena Nascimento Cardoso ◽  
Ana Letícia Sirqueira Nascimento ◽  
Tássia Fernanda S. N. Soares ◽  
...  

2016 ◽  
Vol 28 (6) ◽  
pp. 965-970
Author(s):  
Ved Prakash Kumar ◽  
Anupam Shrivastwa ◽  
Parag Nigam ◽  
Dhyanendra Kumar ◽  
Surendra Prakash Goyal

2002 ◽  
Vol 09 (05n06) ◽  
pp. 1757-1760
Author(s):  
L. NAVARRETE ◽  
A. MARIÑO ◽  
H. SÁNCHEZ

Ultrathin films of (Bi–Pb)–Sr–Ca–Cu–O (2223) were produced by ex situ RF magnetron sputtering on MgO (100) substrates. Films with different thermal treatments and thickness varying between 30 nm and 300 nm were obtained and studied systematically. A structural characterization of these samples was carried out and correlated with their electrical properties and thickness.


Ionics ◽  
2011 ◽  
Vol 17 (6) ◽  
pp. 503-509 ◽  
Author(s):  
Jie Shu ◽  
Miao Shui ◽  
Dan Xu ◽  
Shan Gao ◽  
Tingfeng Yi ◽  
...  

Heritage ◽  
2018 ◽  
Vol 1 (2) ◽  
pp. 468-478 ◽  
Author(s):  
Fernanda Carvalho ◽  
Andreia Lopes ◽  
Antonella Curulli ◽  
Teresa da Silva ◽  
Maria Lima ◽  
...  

Good conservation and restoration practices of cultural heritage assets rely on the knowledge of original materials. In the framework of the HERACLES Project (HERACLES—HEritage Resilience Against CLimate Events on Site, H2020 Grant Agreement 700395), dealing with the effects of climatic actions and natural hazards on built heritage, a set of important heritage sites are currently under study to improve their resilience against climate events. Among these are the medieval Gubbio Town Walls in Italy. The present work focuses on the mortars and binders of this monument and collected samples related to different parts of the Walls, corresponding to various historical periods of construction and interventions. They were characterized to determine their minerochemical composition, thermal behavior, and morphology. For that purpose, ex-situ laboratory techniques, such as X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), optical microscopy (OM), polarized light microscopy (PLM), scanning electron microscopy (SEM), and simultaneous differential thermal analysis and thermogravimetry (TG-DTA) were used to discern trends in different sampling areas due to construction/reconstruction periods and building techniques.


Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1448
Author(s):  
Xuan Zhang ◽  
Yuandong Chen ◽  
Wenqiao Zhang ◽  
Yanli Zhong ◽  
Pei Lei ◽  
...  

Transparent conductive films (TCFs) have received much research attention in the area of aeronautical canopies. However, bad wear, corrosion resistance and weak erosion performance of TCFs dramatically limit their scalable application in the next-generation aeronautical and optoelectronic devices. To address these drawbacks, three types of optically transparent coatings, including acrylic, silicone and polyurethane (PU) coatings were developed and comparatively investigated ex situ in terms of Taber abrasion, nanoindentation and sand erosion tests to improve the wear-resistance and sand erosion abilities of ITO-coated PMMA substrates. To elucidate the sand erosion failure of the coatings, the nanoindentation technique was employed for quantitative assessment of the shape recovery abilities under probe indentation. Results show that the PU topcoats can greatly enhance the sand erosion properties, which were superior to those of acrylic and silicone topcoats. This result can be attributed to the good toughness and self-healing properties of PU topcoats. Additionally, high hardness and good Taber abrasion properties of the ITO films and silicone topcoats did not have an obvious or affirmatory effect on the sand erosion abilities, based on their brittleness and irreparable properties under sand erosion.


Sign in / Sign up

Export Citation Format

Share Document