Performance of the polarized ion source POLIS used at the AGOR accelerator facility

1998 ◽  
Author(s):  
H. R. Kremers ◽  
A. G. Drentje
2016 ◽  
Vol 40 ◽  
pp. 1660103
Author(s):  
V. V. Fimushkin ◽  
A. D. Kovalenko ◽  
L. V. Kutuzova ◽  
Yu. V. Prokofichev ◽  
A. S. Belov ◽  
...  

The Source of Polarized Ions (SPI) of deuterons and protons with nearly resonant charge-exchange plasma ionizer is under construction at the LHEP, JINR. The [Formula: see text]D[Formula: see text] ([Formula: see text]H[Formula: see text]) current output of the source is expected to be at a level of 10[Formula: see text]mA. The polarization will be up to 90% of the maximal vector (±1) for [Formula: see text]D[Formula: see text] ([Formula: see text]H[Formula: see text]) and tensor ([Formula: see text]1, [Formula: see text]) polarization for [Formula: see text]D[Formula: see text]. Realization of the project is carried out in close cooperation with INR of the RAS (Moscow). The equipment available from the CIPIOS ion source (IUCF, Bloomington, USA) is partially used for the Dubna setup. The new source at the JINR NUCLOTRON accelerator facility will make it possible to increase the polarized deuteron beam intensity up to the level of 10[Formula: see text] [Formula: see text]/pulse.


2008 ◽  
Vol 79 (2) ◽  
pp. 02C703 ◽  
Author(s):  
R. Hollinger ◽  
M. Galonska ◽  
B. Gutermuth ◽  
F. Heymach ◽  
H. Krichbaum ◽  
...  

2020 ◽  
Vol 4 (1) ◽  
pp. 13 ◽  
Author(s):  
Atsuya Chiba ◽  
Aya Usui ◽  
Yoshimi Hirano ◽  
Keisuke Yamada ◽  
Kazumasa Narumi ◽  
...  

We developed novel methods for producing negative C60 ion beams at the accelerator facility Takasaki Ion Accelerators for Advanced Radiation Application (TIARA) to increase the current intensity of swift C60 ion beams accelerated to the MeV energy region using a tandem accelerator. We produced negative C60 ion beams with an intensity of 1.3 µA, which is several tens of thousands of times greater than the intensity of beams produced using conventional methods based on the Cs sputtering process. These beams were obtained by temporarily adding an ionization function based on electron attachment to an existing ion source that is widely used in tandem accelerators. The high-intensity swift C60 ion beams can be made available relatively easily to institutes that have tandem accelerators and ion sources of the type used at TIARA because there is no need to change existing ion sources or install new ones.


1998 ◽  
Vol 69 (2) ◽  
pp. 631-633 ◽  
Author(s):  
M. Schlapp ◽  
R. C. Pardo ◽  
R. C. Vondrasek ◽  
J. Szczech ◽  
P. J. Billquist ◽  
...  

2019 ◽  
Vol 34 (36) ◽  
pp. 1942012 ◽  
Author(s):  
Jongwon Kim ◽  
Brahim Mustapha

To establish an accelerator facility based on superconducting linear accelerator (linac) for nuclear and applied sciences in Korea, the rare isotope science project started in December 2011 under the auspices of the Institute for Basic Science (IBS). The layout of the facility has been mostly frozen since 2013 and civil construction began in 2016. On the other hand, an alternative linac design option was recently investigated in collaboration with the linac development group of Argonne National Lab in search of a further optimized configuration. A new linac lattice was developed and evaluated against realistic machine errors using TRACK. The beam optics simulations and error analysis then proved the soundness of this alternative design. In addition, beam optics of the injector was studied for simultaneous acceleration of both stable and rare isotope beams with the use of an electron beam ion source (EBIS). Also considered are alternative options of high-power cyclotrons as ISOL driver in order to enhance the capability of rare isotope beam production and fully exploit the superconducting linac facility built at high cost.


Sign in / Sign up

Export Citation Format

Share Document