Study of plasma treatment for PDMS surface modification on the fabrication of microfluidic devices

2019 ◽  
Author(s):  
Nicholas ◽  
Farrel M. Fajar ◽  
Savira Ramadhanty ◽  
Tomy Abuzairi
2010 ◽  
Vol 31 (1) ◽  
pp. 2-16 ◽  
Author(s):  
Jinwen Zhou ◽  
Amanda Vera Ellis ◽  
Nicolas Hans Voelcker

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1321
Author(s):  
Cheng-Yun Peng ◽  
Chia-Hung Dylan Tsai

Droplet manipulation is important in the fields of engineering, biology, chemistry, and medicine. Many techniques, such as electrowetting and magnetic actuation, have been developed for droplet manipulation. However, the fabrication of the manipulation platform often takes a long time and requires well-trained skills. Here we proposed a novel method that can directly generate and manipulate droplets on a polymeric surface using a universal plasma jet. One of its greatest advantages is that the jet can tremendously reduce the time for the platform fabrication while it can still perform stable droplet manipulation with controllable droplet size and motion. There are two steps for the proposed method. First, the universal plasma jet is set in plasma mode for modifying the manipulation path for droplets. Second, the jet is switched to air-jet mode for droplet generation and manipulation. The jetted air separates and pushes droplets along the plasma-treated path for droplet generation and manipulation. According to the experimental results, the size of the droplet can be controlled by the treatment time in the first step, i.e., a shorter treatment time of plasma results in a smaller size of the droplet, and vice versa. The largest and the smallest sizes of the generated droplets in the results are about 6 µL and 0.1 µL, respectively. Infrared spectra of absorption on the PDMS surfaces with and without the plasma treatment are investigated by Fourier-transform infrared spectroscopy. Tests of generating and mixing two droplets on a PDMS surface are successfully achieved. The aging effect of plasma treatment for the proposed method is also discussed. The proposed method provides a simple, fast, and low-cost way to generate and manipulate droplets on a polymeric surface. The method is expected to be applied to droplet-based cell culture by manipulating droplets encapsulating living cells and towards wall-less scaffolds on a polymeric surface.


RSC Advances ◽  
2015 ◽  
Vol 5 (111) ◽  
pp. 91295-91301 ◽  
Author(s):  
Xin Chen ◽  
Qianli Yang ◽  
Bozhao Chu ◽  
Hang An ◽  
Yi Cheng

This work presents a new method of catalyst surface modification by using oxygen plasma to change the oxidation state of active sites in metal oxide catalysts.


2011 ◽  
Vol 33 (1) ◽  
pp. 89-104 ◽  
Author(s):  
Jinwen Zhou ◽  
Dmitriy A. Khodakov ◽  
Amanda V. Ellis ◽  
Nicolas H. Voelcker

Lab on a Chip ◽  
2005 ◽  
Vol 5 (10) ◽  
pp. 1173 ◽  
Author(s):  
Alex Y. N. Hui ◽  
Gang Wang ◽  
Bingcheng Lin ◽  
Wing-Tat Chan

2013 ◽  
Vol 131 (10) ◽  
pp. n/a-n/a ◽  
Author(s):  
Shuang Li ◽  
Keqing Han ◽  
Huaiping Rong ◽  
Xuanzhe Li ◽  
Muhuo Yu

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 580
Author(s):  
Chao-Ching Chiang ◽  
Philip Nathaniel Immanuel ◽  
Yi-Hsiung Chiu ◽  
Song-Jeng Huang

In this work we report on a rapid, easy-to-operate, lossless, room temperature heterogeneous H2O plasma treatment process for the bonding of poly(methyl methacrylate) (PMMA) and double-sided polished (DSP) silicon substrates by for utilization in sandwich structured microfluidic devices. The heterogeneous bonding of the sandwich structure produced by the H2O plasma is analyzed, and the effect of heterogeneous bonding of free radicals and high charge electrons (e−) in the formed plasma which causes a passivation phenomenon during the bonding process investigated. The PMMA and silicon surface treatments were performed at a constant radio frequency (RF) power and H2O flow rate. Changing plasma treatment time and powers for both processes were investigated during the experiments. The gas flow rate was controlled to cause ionization of plasma and the dissociation of water vapor from hydrogen (H) atoms and hydroxyl (OH) bonds, as confirmed by optical emission spectroscopy (OES). The OES results show the relative intensity peaks emitted by the OH radicals, H and oxygen (O). The free energy is proportional to the plasma treatment power and gas flow rate with H bonds forming between the adsorbed H2O and OH groups. The gas density generated saturated bonds at the interface, and the discharge energy that strengthened the OH-e− bonds. This method provides an ideal heterogeneous bonding technique which can be used to manufacture new types of microfluidic devices.


Sign in / Sign up

Export Citation Format

Share Document