scholarly journals Response to “Comment on ‘Interpretation of Fermi level pinning on 4H–SiC using synchrotron photoemission spectroscopy’ ” [Appl. Phys. Lett. 85, 2661 (2004)]

2004 ◽  
Vol 85 (13) ◽  
pp. 2663-2664
Author(s):  
Sang Youn Han ◽  
Jong-Lam Lee
Keyword(s):  
Fermi Level ◽  
Photoemission Spectroscopy ◽  
Fermi Level Pinning

Chemical Bonding on GaAs (001) Surfaces Passivated Using SeS2

1997 ◽  
Vol 484 ◽  
Author(s):  
Jingxi Sun ◽  
Dong Ju Seo ◽  
W. L. O'Brien ◽  
F. J. Himpsel ◽  
T. F. Kuech
Keyword(s):  
Fermi Level ◽  
Surface States ◽  
Photoemission Spectroscopy ◽  
Specific Chemical ◽  
Bulk Gaas ◽  
Fermi Level Pinning ◽  
Chemical Treatments ◽  
Annealing Conditions ◽  
Outermost Surface ◽  
Synchrotron Radiation Photoemission

AbstractSelenium disulfide has been demonstrated to be an effective passivant for GaAs (001) surfaces. This chemical treatment can be more robust and effective in reducing surface-states-based Fermi level pinning than other analogous chemical treatments. We have studied SeS2-passivated surfaces, formed by treatment of GaAs in SeS2:CS2 solution, with synchrotron radiation photoemission spectroscopy. The SeS2-treated surface consists of a chemically stratified structure of several atomic layers thickness. The As-based sulfides and selenides appear to reside on the outermost surface with the Ga-based compounds adjacent to the bulk GaAs substrate. The motion of the Fermi level within the band gap was monitored during controlled annealing conditions allowing for the specific chemical moieties responsible for the reduction in surface charge to be identified. As-based species are removed at low annealing conditions with little motion of the Fermi level. GaSe-based species, formed on the surface, are clearly shown to be associated with the unpinning of the Fermi level.

CdS and Cd-Free Buffer Layers on Solution Phase Grown Cu2ZnSn(SxSe1- x)4 :Band Alignments and Electronic Structure Determined with Femtosecond Ultraviolet Photoelectron Spectroscopy

2014 ◽  
Vol 1638 ◽  
Author(s):  
Richard Haight ◽  
Aaron Barkhouse ◽  
Wei Wang ◽  
Yu Luo ◽  
Xiaoyan Shao ◽  
...  
Keyword(s):  
Fermi Level ◽  
Photoelectron Spectroscopy ◽  
Solution Phase ◽  
Buffer Layers ◽  
Photoemission Spectroscopy ◽  
Ultraviolet Photoelectron Spectroscopy ◽  
Band Bending ◽  
Pump Probe ◽  
Fermi Level Pinning ◽  
Band Alignments

ABSTRACTThe heterojunctions formed between solution phase grown Cu2ZnSn(SxSe1- x)4 (CZTS,Se) and a number of important buffer materials including CdS, ZnS, ZnO, and In2S3, were studied using femtosecond ultraviolet photoemission spectroscopy (fs-UPS) and photovoltage spectroscopy. With this approach we extract the magnitude and direction of the CZTS,Se band bending, locate the Fermi level within the band gaps of absorber and buffer and measure the absorber/buffer band offsets under flatband conditions. We will also discuss two-color pump/probe experiments in which the band bending in the buffer layer can be independently determined. Finally, studies of the bare CZTS,Se surface will be discussed including our observation of mid-gap Fermi level pinning and its relation to Voc limitations and bulk defects.

Fermi level pinning and band bending in δ-doped BaSnO3

2021 ◽  
Vol 118 (5) ◽  
pp. 052101
Author(s):  
Youjung Kim ◽  
Hyeongmin Cho ◽  
Kookrin Char
Keyword(s):  
Fermi Level ◽  
Band Bending ◽  
Fermi Level Pinning

scholarly journals Investigation of single-domain Au silicide nanowires on Si(110) formed for Au coverages in the monolayer regime

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Stephan Appelfeller
Keyword(s):  
Fermi Level ◽  
Surface Structure ◽  
Density Of States ◽  
The Self ◽  
Single Domain ◽  
Photoemission Spectroscopy ◽  
Annealing Temperatures ◽  
Self Organized ◽  
Scanning Tunnelling ◽  
Tunnelling Microscopy

AbstractThe self-organized formation of single domain Au silicide nanowires is observed on Si(110). These nanowires are analysed using scanning tunnelling microscopy (STM) and spectroscopy (STS) as well as photoemission spectroscopy (PES). Core-level PES is utilised to confirm the formation of Au silicide and establish its presence as the top most surface structure, i.e., the nanowires. The growth of the Au silicide nanowires and their dimensions are studied by STM. They form for Au coverages of about 1 monolayer and are characterized by widths of about 2 to 3 nm and heights below 1 nm while reaching lengths exceeding 500 nm when choosing appropriate annealing temperatures. Valence band PES and STS indicate a small but finite density of states at the Fermi level typical for compound metals.

Fermi‐Level Pinning Free High‐Performance 2D CMOS Inverter Fabricated with Van Der Waals Bottom Contacts

2021 ◽  
pp. 2001212
Author(s):  
Tien Dat Ngo ◽  
Zheng Yang ◽  
Myeongjin Lee ◽  
Fida Ali ◽  
Inyong Moon ◽  
...  
Keyword(s):  
Fermi Level ◽  
High Performance ◽  
Van Der Waals ◽  
Cmos Inverter ◽  
Fermi Level Pinning

scholarly journals Defect Dominated Charge Transport and Fermi Level Pinning in MoS2/Metal Contacts

2017 ◽  
Vol 9 (22) ◽  
pp. 19278-19286 ◽  
Author(s):  
Pantelis Bampoulis ◽  
Rik van Bremen ◽  
Qirong Yao ◽  
Bene Poelsema ◽  
Harold J. W. Zandvliet ◽  
...  
Keyword(s):  
Fermi Level ◽  
Charge Transport ◽  
Metal Contacts ◽  
Fermi Level Pinning

Metal silicide Schottky barriers on Si and Ge show weaker Fermi level pinning

2012 ◽  
Vol 101 (5) ◽  
pp. 052110 ◽  
Author(s):  
L. Lin ◽  
Y. Guo ◽  
J. Robertson
Keyword(s):  
Fermi Level ◽  
Schottky Barriers ◽  
Metal Silicide ◽  
Fermi Level Pinning
Sign in / Sign up

Export Citation Format

Share Document