Measurement of the recombination velocity at single crystalline/polycrystalline GaAs interfaces using time‐resolved photoluminescence

1995 ◽  
Vol 66 (16) ◽  
pp. 2092-2094 ◽  
Author(s):  
Kazuhiro Mochizuki ◽  
Jun‐ichi Kasai ◽  
Tomonori Tanoue
Keyword(s):  
Time Resolved ◽  
Single Crystalline ◽  
Recombination Velocity ◽  
Time Resolved Photoluminescence

The influence of sodium on the molybdenum/Cu(In,Ga)Se2 interface recombination velocity, determined by time resolved photoluminescence

2015 ◽  
Vol 107 (5) ◽  
pp. 051601 ◽  
Author(s):  
Enrico Jarzembowski ◽  
Frank Syrowatka ◽  
Kai Kaufmann ◽  
Wolfgang Fränzel ◽  
Torsten Hölscher ◽  
...  
Keyword(s):  
Time Resolved ◽  
Interface Recombination ◽  
Interface Recombination Velocity ◽  
Recombination Velocity ◽  
Time Resolved Photoluminescence

Exciton dynamics in thick GaN MOVPE epilayers deposited on sapphire.

1997 ◽  
Vol 2 ◽  
Author(s):  
J. Allègre ◽  
P. Lefebvre ◽  
J. Camassel ◽  
B. Beaumont ◽  
Pierre Gibart
Keyword(s):  
Layer Thickness ◽  
Buffer Layers ◽  
Rate Equations ◽  
Time Resolved ◽  
Versus Layer ◽  
Level Model ◽  
Shallow Impurities ◽  
Aln Buffer ◽  
Time Resolved Photoluminescence

Time-resolved photoluminescence spectra have been recorded on three GaN epitaxial layers of thickness 2.5 μm, 7 μm and 16 μm, at various temperatures ranging from 8K to 300K. The layers were deposited by MOVPE on (0001) sapphire substrates with standard AlN buffer layers. To achieve good homogeneities, the growth was in-situ monitored by laser reflectometry. All GaN layers showed sharp excitonic peaks in cw PL and three excitonic contributions were seen by reflectivity. The recombination dynamics of excitons depends strongly upon the layer thickness. For the thinnest layer, exponential decays with τ ~ 35 ps have been measured for both XA and XB free excitons. For the thickest layer, the decay becomes biexponential with τ1 ~ 80 ps and τ2 ~ 250 ps. These values are preserved up to room temperature. By solving coupled rate equations in a four-level model, this evolution is interpreted in terms of the reduction of density of both shallow impurities and deep traps, versus layer thickness, roughly following a L−1 law.

ZnCdO/ZnMgO and ZnO/AlGaN Heterostructures for UV and Visible Light Emitters

2005 ◽  
Vol 892 ◽  
Author(s):  
Andrei Osinsky ◽  
Jianwei Dong ◽  
J. Q. Xie ◽  
B. Hertog ◽  
A. M. Dabiran ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Compositional Analysis ◽  
Optical Emission ◽  
Rf Plasma ◽  
Light Emitters ◽  
Time Resolved ◽  
Light Emitting ◽  
Spatially Resolved ◽  
Time Resolved Photoluminescence ◽  
Made In

AbstractThis paper reviews of some of the progress made in the development of ZnO-based light emitting diodes (LEDs). n-ZnO/p-AlGaN-based heterostructures have been successfully for the fabrication of UV emitting LEDs that have operated at temperatures up to 650K, suggesting an excitonic origin for the optical transitions. RF-plasma-assisted molecular beam epitaxy has been used to grow epitaxial CdxZn1-xO films on GaN/sapphire structure. These films have a single-crystal wurtzite structure as demonstrated by structural and compositional analysis. High quality CdxZn1-xO films were grown with up to x=0.78 mole fraction as determined by RBS and SIMS techniques. Optical emission ranging from purple (Cd0.05Zn0.95O) to yellow (Cd0.29Zn0.71O) was observed. Compositional fluctuations in a Cd0.16Zn0.84O films were not detected by spatially resolved CL measurements, although intensity fluctuation with features of ∼0.5 μm diameter were seen on the intensity maps. Time resolved photoluminescence shows multi-exponential decay with 21 psec. and 49±3 psec. lifetimes, suggesting that composition micro-fluctuations may be present in Cd0.16Zn0.84O film.

scholarly journals Highly fluorescent CsPbBr3/TiO2 core/shell perovskite nanocrystals with excellent stability

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Haitao Chen ◽  
Renhua Li ◽  
Anqi Guo ◽  
Yu Xia
Keyword(s):  
Identical Particle ◽  
Core Shell ◽  
List Type ◽  
Easy Method ◽  
Time Resolved ◽  
Perovskite Nanocrystals ◽  
Promising Application ◽  
The Stability ◽  
Time Resolved Photoluminescence ◽  
Excellent Stability

AbstractThe poor stability of CsPbX3 (X = Cl, Br, I) perovskite nanocrystals is the most impediment to its application in the field of photoelectrics. In this work, monodisperse CsPbBr3/TiO2 nanocrystals are successfully prepared by coating titanium precursor on the surface of colloidal CsPbBr3 nanocrystals at room temperature. The CsPbBr3/TiO2 nanocomposites exhibit excellent stability, remaining the identical particle size (9.2 nm), crystal structures and optical properties. Time-resolved photoluminescence decay shows that the lifetime of CsPbBr3/TiO2 nanocrystals is about 4.04 ns and keeps great stability after lasting two months in the air. Results show that the coating of TiO2 on CsPbBr3 NCs greatly suppressed the anion exchange and photodegradation, which are the main reasons for dramatically improving their chemical stability and photostability. The results provide an effective method to solve the stability problem of perovskite nanostructures and are expected to have a promising application in optoelectronic fieldsArticle highlights 1. Prepared the all-inorganic CsPbBr3/TiO2 core/shell perovskite nanocrystals by an easy method. 2. Explored its essences of PL and lifetime of the synthesized CsPbBr3/TiO2 perovskite nanocrystals. 3. CsPbBr3/TiO2 nanocrystals show the great thermal stability after the post-annealing. 4. The CsPbBr3/TiO2 nanocrystals have a high PLQY and have a promising application in solar cells.

scholarly journals The thermal stability of FAPbBr3 nanocrystals from temperature-dependent photoluminescence and first-principles calculations

RSC Advances ◽  
2020 ◽  
Vol 10 (72) ◽  
pp. 44373-44381
Author(s):  
Xiaozhe Wang ◽  
Qi Wang ◽  
Zhijun Chai ◽  
Wenzhi Wu
Keyword(s):  
First Principles ◽  
First Principle ◽  
First Principles Calculations ◽  
Temperature Dependent ◽  
Time Resolved ◽  
First Principle Calculations ◽  
Steady State Time ◽  
Time Resolved Photoluminescence ◽  
Thermal Stability Of ◽  
Temperature Dependent Photoluminescence

The thermal properties of FAPbBr3 perovskite nanocrystals (PNCs) is investigated by use of temperature-dependent steady-state/time-resolved photoluminescence and first-principle calculations.

Sign in / Sign up

Export Citation Format

Share Document