scholarly journals Genetic correlations among juvenile wood quality and growth traits and implications for selection strategy in Pinus radiata D. Don

2009 ◽  
Vol 66 (6) ◽  
pp. 606-606 ◽  
Author(s):  
Washington J. Gapare ◽  
Brian S. Baltunis ◽  
Miloš Ivković ◽  
Harry X. Wu
Keyword(s):  
Pinus Radiata ◽  
Growth Traits ◽  
Juvenile Wood ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Selection Strategy

Inheritance of density, microfibril angle, and modulus of elasticity in juvenile wood of Pinus radiata at two locations in Australia

2007 ◽  
Vol 37 (11) ◽  
pp. 2164-2174 ◽  
Author(s):  
Brian S. Baltunis ◽  
Harry X. Wu ◽  
Mike B. Powell
Keyword(s):  
Genetic Correlation ◽  
Pinus Radiata ◽  
Modulus Of Elasticity ◽  
Juvenile Wood ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Microfibril Angle ◽  
Wood Properties ◽  
Quality Traits ◽  
Selection For

A total of 1640 increment cores from 343 radiata pine ( Pinus radiata D. Don) families were sampled at two second-generation progeny trials, aged 6 and 7 years, for a detailed genetic study of juvenile wood quality traits. Density, microfibril angle (MFA), and modulus of elasticity (MOE) were determined from pith to bark using SilviScan® technology. Heritability was greatest for area-weighted density at the two sites (0.63 and 0.77, respectively), and the lowest for growth traits (<0.23). Genotype by environment interaction was low for all three wood quality traits. A positive genetic correlation between density and MOE (0.43), and a highly negative, and therefore, favourable genetic correlation between MFA and MOE (–0.92) were observed, implying that improvement of multiple juvenile wood properties is possible. The genetic correlations between whole-core wood quality traits and individual-ring measurements suggest that improvement for juvenile wood properties across the entire profile of the corewood including the innermost rings can be achieved. However, density, MFA, and MOE had unfavourable genetic correlations with diameter growth suggesting that selection for increased density and MOE, and reduced MFA in the absence of selection for growth will result in a genetic loss for growth rate.

scholarly journals Non-Destructive Assessment of Wood Stiffness in Scots Pine (Pinus sylvestris L.) and its Use in Forest Tree Improvement

Forests ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 491 ◽  
Author(s):  
Irena Fundova ◽  
Tomas Funda ◽  
Harry X. Wu
Keyword(s):  
Scots Pine ◽  
Growth Traits ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Forest Tree ◽  
Wood Stiffness ◽  
Standing Trees ◽  
Genetic And Phenotypic Correlations ◽  
Sib Families ◽  
Using Data

Wood stiffness is an important wood mechanical property that predetermines the suitability of sawn timber for construction purposes. Negative genetic correlations between wood stiffness and growth traits have, however, been reported for many conifer species including Scots pine. It is, therefore, important that breeding programs consider wood stiffness and growth traits simultaneously. The study aims to (1) evaluate different approaches of calculating the dynamic modulus of elasticity (MOE, non-destructively assessed stiffness) using data from X-ray analysis (SilviScan) as a benchmark, (2) estimate genetic parameters, and (3) apply index selection. In total, we non-destructively measured 622 standing trees from 175 full-sib families for acoustic velocity (VEL) using Hitman and for wood density (DEN) using Resistograph and Pilodyn. We combined VEL with different wood densities, raw (DENRES) and adjusted (DENRES.TB) Resistograph density, Pilodyn density measured with (DENPIL) and without bark (DENPIL.B), constant of 1000 kg·m−3 (DENCONST), and SilviScan density (DENSILV), to calculate MOEs and compare them with the benchmark SilviScan MOE (MOESILV). We also derived Smith–Hazel indices for simultaneous improvement of stem diameter (DBH) and wood stiffness. The highest additive genetic and phenotypic correlations of the benchmark MOESILV with the alternative MOE measures (tested) were attained by MOEDENSILV (0.95 and 0.75, respectively) and were closely followed by MOEDENRES.TB (0.91 and 0.70, respectively) and MOEDENCONST and VEL (0.91 and 0.65, respectively for both). Correlations with MOEDENPIL, MOEDENPIL.B, and MOEDENRES were lower. Narrow-sense heritabilities were moderate, ranging from 0.39 (MOESILV) to 0.46 (MOEDENSILV). All indices revealed an opportunity for joint improvement of DBH and MOE. Conclusions: MOEDENRES.TB appears to be the most efficient approach for indirect selection for wood stiffness in Scots pine, although VEL alone and MOEDENCONST have provided very good results too. An index combining DBH and MOEDENRES.TB seems to offer the best compromise for simultaneous improvement of growth, fiber, and wood quality traits.

Implications of selection history on genetic architecture of growth, form, and wood-quality traits in Pinus radiata

2008 ◽  
Vol 38 (9) ◽  
pp. 2372-2381 ◽  
Author(s):  
S. Kumar ◽  
R. D. Burdon ◽  
G. T. Stovold ◽  
L. D. Gea
Keyword(s):  
Wood Density ◽  
Pinus Radiata ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Wood Properties ◽  
Radiata Pine ◽  
Single Pair ◽  
Narrow Sense Heritability ◽  
Tree Form ◽  
Selection History

Clonal trials of Pinus radiata D. Don (radiata pine), representing two populations (or breeds), one selected for growth and form (GF) and the other selected for high wood density as well as growth and form (HD), were replicated on two low-altitude New Zealand sites: Tarawera (pumice soil, 38°08′S) and Woodhill (coastal dune, 36°42′S). The GF material comprised 33 pair-crosses (19 parents) × 10 clones, and the HD material comprised 19 single-pair crosses (35 parents) × 10 clones, with six ramets per clone per site. Diameter (DBH), two tree-form variables, and needle retention (NRA) were assessed 8 years after planting, and wood density (DEN), acoustic velocity, and collapse were assessed 9 years after planting. The site differences were generally expressed more strongly in the GF population. Estimated genetic parameters were mostly similar for the two breeds, except that genotypic correlation between DBH and DEN was apparently zero in the HD population. Estimated broad-sense heritabilities (H2) were generally markedly higher than narrow-sense heritability estimates (h2), except with DEN. Estimated between-site type-B clonal genotypic correlations were generally high (>0.8) for wood properties. Overall, DBH showed adverse genetic correlations with wood properties. The Elite/Breed strategy appeared to be helpful in combating adverse genetic correlations.

Efficiency of early selection for rotation-aged growth and wood density traits in Pinus radiata

2005 ◽  
Vol 35 (8) ◽  
pp. 2019-2029 ◽  
Author(s):  
Li Li ◽  
Harry X Wu
Keyword(s):  
Pinus Radiata ◽  
Growth Traits ◽  
Growth Ring ◽  
Genetic Correlations ◽  
Ring Width ◽  
Early Selection ◽  
Breast Height ◽  
Growth Ring Width ◽  
Cambial Age ◽  
Heritability Estimates

A total of 1097 cross-sectional wood disks from breast height were sampled from two rotation-aged (27 and 31 years from planting) genetic trials of radiata pine (Pinus radiata D. Don) in Australia to estimate the genetic correlation between early and rotation-aged growth and wood quality traits and the efficiency of early selection. Annual growth-ring width and density, diameter at breast height (DBH), and area-weighted density (AD) from 30 open-pollinated families were measured using X-ray densitometry. Genotype × site interactions were not significant for density and growth traits. Ring density increased steadily from the pith to cambial age 14, and then density had little change in the following years. For AD, the family and individual heritability estimates were about 0.60 and 0.30 after the first 2 years. For DBH, family and individual narrow-sense heritability estimates increased steadily after the first 4 years, and family heritability increased to 0.7 at a cambial age of 11 and had little change thereafter. Individual heritability estimate increased to 0.4 at cambial age 14 and was similar for the later ages. Beyond a cambial age of 5 years, there were strong negative genetic correlations of around –0.80 between AD and DBH. Age–age genetic correlations for AD were high and reached 0.80 and above after cambial age 3. Age–age genetic correlations for DBH were similar to AD, except the first two years. The most efficient early selection year was between ages 4 and 6 years after planting for AD, and between ages 8 and 11 years for DBH.

scholarly journals Genetic Variation in the Microfibril Angle of Loblolly Pine From Two Test Sites

2004 ◽  
Vol 28 (4) ◽  
pp. 196-204 ◽  
Author(s):  
Jennifer H. Myszewski ◽  
Floyd E. Bridgwater ◽  
William J. Lowe ◽  
Thomas D. Byram ◽  
Robert A. Megraw
Keyword(s):  
Specific Gravity ◽  
Loblolly Pine ◽  
Combining Ability ◽  
Growth Traits ◽  
Genetic Relationships ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Microfibril Angle ◽  
Narrow Sense Heritability ◽  
Individual Tree

Abstract In recent years, several studies have examined the effect of microfibril angle (MFA) on wood quality. However, little research has been conducted upon the genetic mechanisms controlling MFA. In this study, we examined the heritability of MFA in loblolly pine, Pinus taeda L.,and its genetic relationships with height, diameter, volume, and specific gravity. Increment cores were collected at breast height from 20 to 25 progeny from each of 12 to 17 crosses (among 11 parents) in two modified partial-diallels in different locations in southern Arkansas. Specific gravitywas measured on segments containing rings 1 through 5 and on segments containing rings 6 through 20. MFA was measured on the earlywood and latewood sections of rings 4, 5, 19, and 20. Rings 4 and 5 were chosen as representative of core wood and rings 19 and 20 as representative of outer wood. Analyses of variance revealed statistically significant genetic and environmental influences on MFA. Significant general combining ability (GCA), specific combining ability (SCA), and SCA × block effects indicated that there are both additive and nonadditive genetic influences on MFA. Individual-tree, narrow-sense heritability estimates were variable, ranging from 0.17 for earlywood (ring) 4 MFA to 0.51 for earlywood (ring) 20 MFA. Genetic correlations between MFA, specific gravity, and the growth traits were nonsignificant due to large estimated standard errors. South.J. Appl. For. 28(4):196–204.

Breeding for improved growth and juvenile corewood stiffness in slash pine

2007 ◽  
Vol 37 (10) ◽  
pp. 1886-1893 ◽  
Author(s):  
Xiaobo Li ◽  
Dudley A. Huber ◽  
Gregory L. Powell ◽  
Timothy L. White ◽  
Gary F. Peter
Keyword(s):  
Genetic Correlation ◽  
Growth Traits ◽  
Low Cost ◽  
Genetic Correlations ◽  
Volume Growth ◽  
Pinus Elliottii ◽  
Tree Improvement ◽  
Slash Pine ◽  
Narrow Sense Heritability ◽  
Improvement Programs

The importance of integrating measures of juvenile corewood mechanical properties, modulus of elasticity in particular, with growth and disease resistance in tree improvement programs has increased. We investigated the utility of in-tree velocity stiffness measurements to estimate the genetic control of corewood stiffness and to select for trees with superior growth and stiffness in a progeny trial of 139 families of slash pine, Pinus elliottii Engelm. grown on six sites. Narrow-sense heritability estimates across all six sites for in-tree acoustic velocity stiffness at 8 years (0.42) were higher than observed for height (0.36) and diameter at breast height (DBH) (0.28) at 5 years. The overall type B genetic correlation across sites for velocity stiffness was 0.68, comparable to those found for DBH and volume growth, indicating that family rankings were moderately repeatable across all sites for these traits. No significant genetic correlations were observed between velocity stiffness, DBH, and volume growth. In contrast, a significant, but small, favorable genetic correlation was found between height and velocity stiffness. Twenty percent of the families had positive breeding values for both velocity stiffness and growth. The low cost, high heritability and nearly independent segregation of the genes involved with in-tree velocity stiffness and growth traits indicate that acoustic methods can be integrated into tree improvement programs to breed for improved corewood stiffness along with growth in slash pine.

scholarly journals Genetic-Quantitative Uni- and Bi-Trait Analysis for Growth Traits in the Colombian Creole Breed Blanco Orejinegro (BON)

2021 ◽  
Author(s):  
Marisol Londoño-Gil ◽  
Juan Carlos Rincón Flórez ◽  
Albeiro López-Herrera ◽  
Luis Gabriel Gonzalez-Herrera
Keyword(s):  
Growth Traits ◽  
Genetic Correlations ◽  
Genetic Effect ◽  
Cattle Breed ◽  
Live Weight ◽  
Daily Weight Gain ◽  
Additive Genetic Effect ◽  
Selection Processes ◽  
Heritability Estimates ◽  
Maternal Heritability

Abstract The Blanco Orejinegro (BON) is a Colombian creole cattle breed that is not genetically well characterized for growth traits. The aim of this work was to estimate genetic parameters for birth weight (BW), weaning weight (WW), yearling weight (YW), daily weight gain between birth and weaning (DWG), time to reach 120 kg of live weight (T120), and time to reach 60% of adult weight (T60%), and establish the selection criteria for growth traits in the BON population of Colombia. Genealogical and phenotypic information for BW, WW, YW, DWG, T120, and T60% traits of BON animals from 14 Colombian herds were used. These traits were analyzed with the AIREML method in a uni- and bi-trait animal model including the maternal effect for BW, WW, DWG, and T120. The direct heritability estimates values were 0.22 ± 0.059 (BW), 0.20 ± 0.057 (WW), 0.20 ± 0.153 (YW), 0.17 ± 0.07 (DWG), 0.26 (T120), and 0.44 ± 0.03 (T60%). The maternal heritability estimates values were 0.14 ± 0.040 (BW), 0.15 ± 0.039 (WW), 0.25 ± 0.06 (DWG), and 0.16 (T120). The direct genetic correlations were high (>|0.60|) among all the traits, except between T60% with BW, WW, YW, and DWG (ranged from -0.02 to -0.51), all in a favorable direction. The results showed that there is genetic variation in the growth traits associated with the additive genetic effect and they might respond to selection processes. Furthermore, genetic gains would improve through selection, especially for YW and T60% when WW is used as criterion.

Growth and wood properties of genetically improved loblolly pine: propagation type comparison and genetic parameters

2014 ◽  
Vol 44 (3) ◽  
pp. 263-272 ◽  
Author(s):  
Finto Antony ◽  
Laurence R. Schimleck ◽  
Lewis Jordan ◽  
Benjamin Hornsby ◽  
Joseph Dahlen ◽  
...  
Keyword(s):  
Wood Density ◽  
Loblolly Pine ◽  
Growth Traits ◽  
Genetic Correlations ◽  
Tree Height ◽  
Wood Properties ◽  
Genetically Improved ◽  
Growth Properties ◽  
Wood Traits ◽  
Clonal Lines

The use of clonal varieties in forestry offers great potential to improve growth traits (quantity) and wood properties (quality) of loblolly pine (Pinus taeda L.). Loblolly pine trees established via somatic embryogenesis (clones), full-sib zygotic crosses, and half-sib zygotic open-pollinated families were sampled to identify variation in growth and wood properties among and within clonal lines and zygotic controls. Increment cores 5 mm in diameter were collected at age 4 from a total of 2615 trees. Growth properties (diameter at 1.4 m and total tree height) and wood properties (whole-core density, latewood and earlywood density, and latewood percent) were measured for each tree sampled in the study. Overall, growth properties were better for full-sib seedling than for clonal lines, whereas wood density was higher for clonal lines than full-sib and open-pollinated seedlings. However, there were clonal lines with better growth and higher wood density. Clonal repeatability of both growth and wood properties across sampled sites and genetic correlations between growth and wood traits were determined, with higher repeatability observed for wood traits compared with growth traits. Significant genetic correlations were observed for tree height and wood properties, whereas weak correlations were observed for diameter and wood properties.

Genetic parameters for daily live-weight gain, live fleshiness and bone thinness in station-tested Piemontese young bulls

2001 ◽  
Vol 72 (3) ◽  
pp. 449-456 ◽  
Author(s):  
A. Albera ◽  
R. Mantovani ◽  
G. Bittante ◽  
A. F. Groen ◽  
P. Carnier
Keyword(s):  
Weight Gain ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Genetic Correlations ◽  
Live Weight ◽  
Adaptation Period ◽  
Production Traits ◽  
Multiple Trait ◽  
Live Weight Gain ◽  
Total Gain

AbstractEstimates of genetic parameters for beef production traits were obtained for Piemontese cattle. Data were from 988 young bulls station-tested from 1989 till 1998. Bulls entered the station at 6 to 8 weeks of age and, after an adaptation period of 3 months, were tested for growth, live fleshiness and bone thinness. Length of test was 196 days. Growth traits considered were gain at farm, gain during the adaptation period, gain on test and total gain at the station. Six different fleshiness traits and bone thinness were scored on live animals at the end of the test using a linear system. Live evaluations of fleshiness were adjusted for the weight at scoring in order to provide an assessment of conformation independent of body size. Genetic parameters were estimated using animal models. Heritability of live-weight gain ranged from 0·20 in the adaptation period to 0·60 for total gain at the station. Genetic correlations between gains at station in different periods were high (from 0·63 to 0·97). Residual correlation between gain during the adaptation period and gain during test was negative, probably due to the occurrence of compensatory growth of the animals.Live fleshiness traits and bone thinness were of moderate to high heritability (from 0·34 to 0·55) and highly correlated indicating that heavy muscled bulls also have thin bones. Accuracy of breeding values and therefore response to selection were improved by multiple trait analysis of the live fleshiness traits and bone thinness. Overall weight gain at the station had a moderate negative genetic correlation with all live fleshiness traits and bone thinness (from –0·11 to –0·39).

PSVII-28 Genetic analysis of frame score and performance traits in Nellore cattle–growth, carcass and efficiency traits

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 238-239
Author(s):  
Maria Paula Negreiros ◽  
Elisa Peripolli ◽  
Claudio U Magnabosco ◽  
Nayanny Guimarães ◽  
Raysildo Lôbo ◽  
...  
Keyword(s):  
Animal Model ◽  
Growth Traits ◽  
Genetic Correlations ◽  
Genetic Selection ◽  
Heritability Estimate ◽  
Score System ◽  
Adult Weight ◽  
Nellore Cattle ◽  
And Performance ◽  
Selection Of

Abstract We evaluated a novel frame score system for Nellore cattle raised on pasture (Guimarães et al., 2020 J, Anim. Sci. 98 (Suppl. 4)). Growth traits included age-adjusted weights (kg) at birth (W0), 120 (W120), 210 (W210) and 450 (W450) days of age, and adult weight (AW). Carcass traits (by ultrasound) included ribeye area (REA, cm2), 12th-13th rib backfat (BF, mm), rump fat (RF, mm), and intramuscular fat (IMF, %). Feed efficiency traits included residual feed intake (RFI, kg of DM/d) and DM intake (DMI, kg/d). We applied the previously developed equations (that also include hip height (HH, cm) and age to 12,049 records from the National Association of Breeders and Researchers (ANCP) database:FSmales= -20.35 + 0.1305*REA + 0.2633*BF - 0.5901*RF+ 0.1139*HH + 0.0056*AGEFSfemales = -11.87 + 0.1316*REA - 0.2457*BF - 0.6218*RF + 0.1139*HH + 0.0009507*AGEThe (co)variance components and genetic parameters were estimated using a linear animal model or a threshold animal model depending on the trait. The heritability estimate for frame score was moderate (0.30). Estimated genetic correlations were moderate for growth traits (W0, 0.51; W120, 0.41; W210, 0.35; W450, 0.29; AW, 0.39). Estimated genetic correlations for carcass and efficiency traits ranged from low to high (REA, 0.50; BF, -0.25; RF, -0.84; IMF, -0.15; DMI, 0.29; RFI, 0.10). The estimates support the notion that larger frame animals are heavier, leaner and later maturing, and less feed efficient. The new frame score may be a useful tool for genetic selection of animals that are best suited to their environment.

Sign in / Sign up

Export Citation Format

Share Document