Superhydrophobic gradient wrinkle strain sensor with ultra-high sensitivity and broad strain range for motion monitoring

2021 ◽  
Vol 9 (15) ◽  
pp. 9634-9643
Author(s):  
Zhenming Chu ◽  
Weicheng Jiao ◽  
Yifan Huang ◽  
Yongting Zheng ◽  
Rongguo Wang ◽  
...  
Keyword(s):  
Human Body ◽  
Full Range ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity

A graphene-based gradient wrinkle strain sensor with a broad range and ultra-high sensitivity was fabricated by a simple pre-stretching method. It can be applied to the detection of full-range human body motions.

scholarly journals High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

2021 ◽  
Author(s):  
Lu Liu ◽  
Libo Wang ◽  
Xuqing Liu ◽  
Wenfeng Yuan ◽  
Mengmeng Yuan ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Active Material ◽  
Large Body ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor

Abstract Although 2D nanomaterials such as MXene Ti3C2Tx have been used in flexible electronic devices for their unique properties such as high conductivity, excellent mechanical performance, flexibility, and good hydrophilicity, less research has focused on of MXene-based cotton fabric strain sensors. Moreover, fabrication of wearable strain sensors with a low cost, high sensitivity, good biocompatibility, and broad sensing range is still a challenge. In this work, a high-performance wearable strain sensor composed of 2D MXene d-Ti3C2Tx nanomaterials and cotton fabric is reported. As the active material in the sensor, MXene d-Ti3C2Tx exhibited an excellent conductivity and hydrophilicity and adhered well to the fabric fibers by electrostatic adsorption. Due to the unique structure of the fabric substrate and the properties of MXene sheets, the fabricated pressure sensor achieved a high sensitivity. The gauge factor of the MXene@cotton fabric strain sensor reached up to 4.11 within the strain range of 15 %. Meanwhile, the sensor possessed high durability (>500 cycles) and a low strain detection limit of 0.3%. Finally, the encapsulated strain sensor was used to detect subtle or large body movements and exhibited a rapid response. This study shows that the MXene@cotton fabric strain sensor reported here have great potential for use in flexible, comfortable, and wearable devices for health monitoring and motion detection.

scholarly journals Nano-Cracked Strain Sensor with High Sensitivity and Linearity by Controlling the Crack Arrangement

Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2834 ◽  
Author(s):  
Hyunsuk Jung ◽  
Chan Park ◽  
Hyunwoo Lee ◽  
Seonguk Hong ◽  
Hyonguk Kim ◽  
...  
Keyword(s):  
Pulse Wave ◽  
Wearable Sensors ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Micro Deformation ◽  
Sensing Performance ◽  
Limited Sensitivity

Studies on wearable sensors that monitor various movements by attaching them to a body have received considerable attention. Crack-based strain sensors are more sensitive than other sensors. Owing to their high sensitivity, these sensors have been investigated for measuring minute deformations occurring on the skin, such as pulse. However, existing studies have limited sensitivity at low strain range and nonlinearity that renders any calibration process complex and difficult. In this study, we propose a pre-strain and sensor-extending process to improve the sensitivity and linearity of the sensor. By using these pre-strain and sensor-extending processes, we were able to control the morphology and alignment of cracks and regulate the sensitivity and linearity of the sensor. Even if the sensor was fabricated in the same manner, the sensor that involved the pre-strain and extending processes had a sensitivity 100 times greater than normal sensors. Thus, our crack-based strain sensor had high sensitivity (gauge factor > 5000, gauge factor (GF = (△R/R0)/ε), linearity, and low hysteresis at low strain (<1% strain). Given its high sensing performance, the sensor can be used to measure micro-deformation, such as pulse wave and voice.

Embedded 3D Printing of Highly Flexible Nanocomposites With Piezoresistive Sensing Capabilities

2020 ◽  
Author(s):  
Blake Herren ◽  
Mrinal C. Saha ◽  
M. Cengiz Altan ◽  
Yingtao Liu
Keyword(s):  
3D Printing ◽  
Human Skin ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Curing Temperature ◽  
Gauge Factor ◽  
Strain Sensing ◽  
Sensing Applications ◽  
Human Joints

Abstract In recent years, highly flexible nanocomposite sensors have been developed for the detection of a variety of human body movements. To precisely detect the bending motions of human joints, the sensors must be able to conform well with the human skin and produce signals that effectively describe the amount of deformation applied to the material during bending. In this paper, a carbon nanotube-based piezoresistive strain sensor is developed via the direct ink writing based embedded 3D printing method. The optimum weight concentration range of carbon nanotubes in the nanocomposite inks, appropriate for embedded 3D printing, is identified. Samples with complex 2D and 3D geometries are printed to demonstrate the manufacturing capabilities of the embedded printing process. The sensitivity of the piezoresistive strain sensor is optimized by determining the ideal nanofiller concentration, curing temperature, and nozzle size to produce the highest gauge factor in a wide strain range. The piezoresistive and mechanical properties of the optimized sensors are fully characterized to verify the suitability for skin-attachable strain sensing applications. The developed sensors have a wide sensing range, high sensitivity, and minimal strain rate dependence. In addition, their low elasticity and high biocompatibility allow them to be comfortably bonded on the human skin.

scholarly journals A Practical Strain Sensor Based on Ecoflex/Overlapping Graphene/Ecoflex Sandwich Structures for Vocal Fold Vibration and Body Motion Monitoring

2022 ◽  
Vol 2 ◽  
Author(s):  
Yanyan Fan ◽  
Hongbin Zhao ◽  
Yifan Yang ◽  
Yi Yang ◽  
Tianling Ren ◽  
...  
Keyword(s):  
Structural Design ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Body Motion ◽  
Gauge Factor ◽  
Sensing Element ◽  
Structure Deformation ◽  
Vocal Fold Vibration

Graphene-based stretchable and flexible strain sensors are one of the promising “bridges” to the biomedical realm. However, enhancing graphene-based wearable strain sensors to meet the demand of high sensitivity, broad sensing range, and recoverable structure deformation simultaneously is still a great challenge. In this work, through structural design, we fabricated a simple Ecoflex/Overlapping Graphene/Ecoflex (EOGE) strain sensor by encapsulating a graphene sensing element on polymer Ecoflex substrates using a drop-casting method. The EOGE strain sensor can detect stretching with high sensitivity, a maximum gauge factor of 715 with a wide strain range up to 57%, and adequate reliability and stability over 1,000 cycles for stretching. Moreover, the EOGE strain sensor shows recoverable structure deformation, and the sensor has a steady response in the frequency disturbance test. The good property of the strain sensor is attributed to the resistance variation induced by the overlap and crack structure of graphene by structural design. The vibrations caused by sound and various body movements have been thoroughly detected, which exhibited that the EOGE strain sensor is a promising candidate for wearable biomedical electronic applications.

scholarly journals Flexible Metal/Polymer Composite Films Embedded with Silver Nanowires as a Stretchable and Conductive Strain Sensor for Human Motion Monitoring

Micromachines ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 372 ◽  
Author(s):  
Jinjin Luan ◽  
Qing Wang ◽  
Xu Zheng ◽  
Yao Li ◽  
Ning Wang
Keyword(s):  
Polymer Composite ◽  
Silver Nanowires ◽  
Composite Films ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Applied Strain ◽  
Potential Candidate ◽  
Flexible Metal ◽  
Metal Polymer

To avoid conductive failure due to the cracks of the metal thin film under external loads for the wearable strain sensor, a stretchable metal/polymer composite film embedded with silver nanowires (AgNWs) was examined as a potential candidate. The combination of Ag film and AgNWs enabled the fabrication of a conductive film that was applied as a high sensitivity strain sensor, with gauge factors of 7.1 under the applied strain of 0–10% and 21.1 under the applied strain of 10–30%. Furthermore, the strain sensor was demonstrated to be highly reversible and remained stable after 1000 bending cycles. These results indicated that the AgNWs could act as elastic conductive bridges across cracks in the metal film to maintain high conductivity under tensile and bending loads. As such, the strain sensor engineered herein was successfully applied in the real-time detection and monitoring of large motions of joints and subtle motions of the mouth.

scholarly journals Design of a Sensitive Balloon Sensor for Safe Human–Robot Interaction

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2163
Author(s):  
Dongjin Kim ◽  
Seungyong Han ◽  
Taewi Kim ◽  
Changhwan Kim ◽  
Doohoe Lee ◽  
...  
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Robot Interaction ◽  
Large Area ◽  
Tactile Sensors ◽  
Robot Interaction ◽  
Mechanical Crack ◽  
Flexible Strain Sensor ◽  
Contact Sensing

As the safety of a human body is the main priority while interacting with robots, the field of tactile sensors has expanded for acquiring tactile information and ensuring safe human–robot interaction (HRI). Existing lightweight and thin tactile sensors exhibit high performance in detecting their surroundings. However, unexpected collisions caused by malfunctions or sudden external collisions can still cause injuries to rigid robots with thin tactile sensors. In this study, we present a sensitive balloon sensor for contact sensing and alleviating physical collisions over a large area of rigid robots. The balloon sensor is a pressure sensor composed of an inflatable body of low-density polyethylene (LDPE), and a highly sensitive and flexible strain sensor laminated onto it. The mechanical crack-based strain sensor with high sensitivity enables the detection of extremely small changes in the strain of the balloon. Adjusting the geometric parameters of the balloon allows for a large and easily customizable sensing area. The weight of the balloon sensor was approximately 2 g. The sensor is employed with a servo motor and detects a finger or a sheet of rolled paper gently touching it, without being damaged.

scholarly journals A Full-Range Flexible and Printed Humidity Sensor Based on a Solution-Processed P(VDF-TrFE)/Graphene-Flower Composite

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1915
Author(s):  
Shenawar Ali Khan ◽  
Muhammad Saqib ◽  
Muhammad Muqeet Rehman ◽  
Hafiz Mohammad Mutee Ur Rehman ◽  
Sheik Abdur Rahman ◽  
...  
Keyword(s):  
Active Layer ◽  
Humidity Sensor ◽  
High Reliability ◽  
Full Range ◽  
High Sensitivity ◽  
Fast Response ◽  
Considerable Change ◽  
Relative Humidity Range ◽  
Response And Recovery ◽  
Proportional Relationship

A novel composite based on a polymer (P(VDF-TrFE)) and a two-dimensional material (graphene flower) was proposed as the active layer of an interdigitated electrode (IDEs) based humidity sensor. Silver (Ag) IDEs were screen printed on a flexible polyethylene terephthalate (PET) substrate followed by spin coating the active layer of P(VDF-TrFE)/graphene flower on its surface. It was observed that this sensor responds to a wide relative humidity range (RH%) of 8–98% with a fast response and recovery time of 0.8 s and 2.5 s for the capacitance, respectively. The fabricated sensor displayed an inversely proportional response between capacitance and RH%, while a directly proportional relationship was observed between its impedance and RH%. P(VDF-TrFE)/graphene flower-based flexible humidity sensor exhibited high sensitivity with an average change of capacitance as 0.0558 pF/RH%. Stability of obtained results was monitored for two weeks without any considerable change in the original values, signifying its high reliability. Various chemical, morphological, and electrical characterizations were performed to comprehensively study the humidity-sensing behavior of this advanced composite. The fabricated sensor was successfully used for the applications of health monitoring and measuring the water content in the environment.

Sign in / Sign up

Export Citation Format

Share Document