A label-free electrochemical aptasensor for sensitive edifenphos detection in rice

2020 ◽  
Vol 12 (9) ◽  
pp. 1237-1243 ◽  
Author(s):  
Majid Arvand ◽  
Javad Gholami
Keyword(s):  
Label Free ◽  
Electrochemical Aptasensor ◽  
First Time ◽  
Sensitive Method

Herein, for the first time, we developed a facile and sensitive method for the determination of edifenphos (EDI).

Encapsulation of hemin in Fe-based metal-organic frameworks and its application for the direct determination of aflatoxin M1

2021 ◽  
pp. 1-10
Author(s):  
F. Jahangiri-Dehaghani ◽  
H.R. Zare ◽  
Z. Shekari
Keyword(s):  
Electrochemical Impedance ◽  
Metal Organic Frameworks ◽  
Direct Determination ◽  
Differential Pulse ◽  
Aflatoxin M1 ◽  
Label Free ◽  
Electrochemical Aptasensor ◽  
Selective Determination ◽  
Metal Organic

A label-free electrochemical aptasensor was constructed for the sensitive and selective determination of AFM1. For preparation of the aptasensor, the AFM1 aptamer was immobilised on the surface of a glassy carbon electrode modified with hemin encapsulated in Fe-based metal-organic frameworks (hemin@Fe-MIL-101). The morphology and the structure of Fe-MIL-101 and hemin@Fe-MIL-101 were evaluated by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray powder diffraction and Brunauer-Emmett-Teller-N2 sorption methods. Electrochemical impedance spectroscopy and cyclic voltammetry were performed to monitor the fabrication process of the electrochemical aptasensor. The electrochemical reduction current of hemin encapsulated in Fe-MIL-101 serves as a signal for the quantitative determination of AFM1. Differential pulse voltammetry was done to determine the AFM1 concentration in the linear range of 1.0×10-1-100.0 ng/ml. The detection limit of AFM1 was estimated to be 4.6×10-2 ng/ml. Finally, the fabricated aptasensor was applied to determine AFM1 in raw and boiled milk samples.

Multiplexed determination of human growth hormone and prolactin at a label free electrochemical immunosensor using dual carbon nanotube–screen printed electrodes modified with gold and PEDOT nanoparticles

The Analyst ◽  
2014 ◽  
Vol 139 (18) ◽  
pp. 4556-4563 ◽  
Author(s):  
V. Serafín ◽  
G. Martínez-García ◽  
L. Agüí ◽  
P. Yáñez-Sedeño ◽  
J. M. Pingarrón
Keyword(s):  
Growth Hormone ◽  
Carbon Nanotube ◽  
Simultaneous Determination ◽  
Human Growth Hormone ◽  
Human Growth ◽  
Electrochemical Immunosensor ◽  
Label Free ◽  
Screen Printed Electrodes ◽  
First Time

A label-free dual electrochemical immunosensor for simultaneous determination of human growth and prolactin hormones was prepared for the first time.

scholarly journals Label-Free and Sensitive Determination of Cadmium Ions Using a Ti-Modified Co3O4-Based Electrochemical Aptasensor

Biosensors ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 195
Author(s):  
Yang Liu ◽  
Dongwei Zhang ◽  
Jina Ding ◽  
Kashif Hayat ◽  
Xijia Yang ◽  
...  
Keyword(s):  
Environmental Protection Agency ◽  
Concentration Limit ◽  
Co3o4 Nanoparticles ◽  
Label Free ◽  
Current Signal ◽  
Electrochemical Aptasensor ◽  
Screen Printed Carbon Electrode ◽  
Sensitive Determination

The current work demonstrates an electrochemical aptasensor for sensitive determination of Cd2+ based on the Ti-modified Co3O4 nanoparticles. In this unlabeled system, Ti-modified Co3O4 nanoparticles act as current signal amplifiers modified on the screen-printed carbon electrode (SPCE) surface, while the derivative aptamer of Cd2+ works as a target recognizer. In addition, the sensing is based on the increase in electrochemical probe thionine current signal due to the binding of aptamer to Cd2+ via specific recognition. In the current study, key parameters, including aptamer concentration, pH, and incubation time were optimized, respectively, to ensure sensing performance. Cyclic voltammetry was used not only to characterize each preparation and optimization step, but also to profile the bindings of aptamer to Cd2+. Under optimal conditions, Cd2+ can be determined in a linear range of 0.20 to 15 ng/mL, with a detection limit of 0.49 ng/mL, significantly below the maximum concentration limit set by the U.S. Environmental Protection Agency. Based on comparative analysis and the results of recovery test with real samples, this simple, label-free but highly selective method has considerable potential and thus can be used as an in-situ environmental monitoring platform for Cd2+ testing.

Label-free, ITO-based immunosensor for the detection of a cancer biomarker: Receptor for Activated C Kinase 1

The Analyst ◽  
2016 ◽  
Vol 141 (19) ◽  
pp. 5618-5626 ◽  
Author(s):  
E. B. Bahadır ◽  
M. K. Sezgintürk
Keyword(s):  
Cancer Biomarker ◽  
Label Free ◽  
First Time

A new, quite sensitive disposable immunosensor, based on the anti-RACK1 antibody, was developed for the determination of Receptor for Activated C Kinase 1 (RACK1) for the first time.

Slurry sampling thermospray flame furnace atomic absorption spectrometric determination of bismuth in water and geological samples combined with ultrasound-assisted dispersive micro solid phase extraction

2020 ◽  
Vol 35 (3) ◽  
pp. 526-533 ◽  
Author(s):  
Kan Hu ◽  
Peng Li ◽  
Shengchun Yang ◽  
Xiaodong Wen
Keyword(s):  
Solid Phase ◽  
Phase Extraction ◽  
Slurry Sampling ◽  
Geological Samples ◽  
Ultrasound Assisted ◽  
Flame Furnace ◽  
First Time ◽  
Atomic Absorption Spectrometric ◽  
Sensitive Method

UA-DMSPE was combined with TS-FF-AAS for the first time, and a sensitive method for the determination of bismuth was established.

Gold nanoparticles/Orange II functionalized graphene nanohybrid based electrochemical aptasensor for label-free determination of insulin

RSC Advances ◽  
2016 ◽  
Vol 6 (36) ◽  
pp. 30732-30738 ◽  
Author(s):  
Tingting Li ◽  
Zhiguang Liu ◽  
Li Wang ◽  
Yujing Guo
Keyword(s):  
Gold Nanoparticles ◽  
Electrode Surface ◽  
Insulin Binding ◽  
Orange Ii ◽  
Functionalized Graphene ◽  
Label Free ◽  
Electrochemical Aptasensor

Nanocomposites, gold nanoparticles on Orange II functionalized graphene (AuNPs/O-GNs), were developed to modify the electrode surface for anchoring an insulin binding aptamer.

Label-Free Electrochemical Aptasensor for Determination of Chloramphenicol Based on Gold Nanocubes-Modified Screen-Printed Gold Electrode

2015 ◽  
Vol 27 (6) ◽  
pp. 1449-1456 ◽  
Author(s):  
Ayemeh Bagheri Hashkavayi ◽  
Jahan Bakhsh Raoof ◽  
Reza Ojani ◽  
Ezat Hamidi Asl
Keyword(s):  
Gold Electrode ◽  
Label Free ◽  
Electrochemical Aptasensor ◽  
Screen Printed

Label-free electrochemical aptasensor based on reduced graphene oxide–hemin–chitosan nanocomposite for the determination of glypican-3

2021 ◽  
Author(s):  
Min Chen ◽  
Haimei Li ◽  
Xueming Su ◽  
Runqiang Wu ◽  
Huafu Feng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Label Free ◽  
Electrochemical Aptasensor ◽  
Recognition Element ◽  
Reduced Graphene

A GPC3 electrochemical aptasensor was constructed using an RGO–H–CS-modified SPE as a biosensing platform and GPC3 aptamer as the recognition element.

Novel label-free electrochemical aptasensor for determination of Diazinon using gold nanoparticles-modified screen-printed gold electrode

2018 ◽  
Vol 120 ◽  
pp. 122-128 ◽  
Author(s):  
Shokoufeh Hassani ◽  
Milad Rezaei Akmal ◽  
Armin Salek-Maghsoudi ◽  
Soheila Rahmani ◽  
Mohammad Reza Ganjali ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Gold Electrode ◽  
Label Free ◽  
Electrochemical Aptasensor ◽  
Screen Printed
Sign in / Sign up

Export Citation Format

Share Document