Effects of local rearrangement of magnetic particles on deformation in magneto-sensitive elastomers

Soft Matter ◽  
2019 ◽  
Vol 15 (17) ◽  
pp. 3552-3564 ◽  
Author(s):  
Dirk Romeis ◽  
Vladimir Toshchevikov ◽  
Marina Saphiannikova
Keyword(s):  
Magnetic Field ◽  
Magnetic Particles ◽  
Comprehensive Analysis ◽  
Magnetic Interactions

Based on the dipole–dipole approach for magnetic interactions we present a comprehensive analysis of spatial rearrangement of magnetic particles under a magnetic field and its effect on the magneto-induced deformation of magneto-sensitive elastomers.

Modeling Magneto-Active Elastomer Composites Using the Finite Element Method

2014 ◽  
Author(s):  
Robert Sheridan ◽  
Carrie Tedesco ◽  
Paris von Lockette ◽  
Mary Frecker
Keyword(s):  
Magnetic Field ◽  
Boundary Conditions ◽  
Applied Magnetic Field ◽  
Applied Field ◽  
Barium Ferrite ◽  
Uniform Magnetic Field ◽  
Magnetic Particles ◽  
Magnetic Interactions ◽  
Pdms Substrate ◽  
Fixed Boundary

Magneto-active elastomers (MAE) are a new branch of smart materials that consist of hard-magnetic particles such as barium ferrite in an elastomer matrix. Under the application of a uniform magnetic field, the MAE material undergoes large deformation as the material bends due to magnetic torques acting on the distribution of hard-magnetic particles. This behavior demonstrates the potential of MAEs to act as remote actuators. MAEs vary from magnetorheological elastomers (MRE) which use soft-magnetic iron particles in place of the hard-magnetic particles and they are driven by magnetic interactions between particles. In this work, MAEs were fabricated using 30% v/v 325 mesh M-type barium ferrite (BaM) particles in Dow Corning HS II silicone elastomers. Prior to curing, the samples were placed in a uniform (∼2 Tesla) magnetic field to align the magnetic particles and produce a magnetization oriented in the direction of the applied magnetic field. The specimens were bonded to a passive poldymethylsiloxane (PDMS) substrate to form a two-segment accordion structure where the MAEs with magnetization, M, were placed in opposing orientations a prescribed distance apart. The application of a uniform magnetic field perpendicular to the magnetization of the undeformed MAEs would result in a bend (on the PDMS) that is dependent upon the orientation of the magnetic particles and the direction of the applied field. This behavior of the composite structure highlights the ability of the MAE material to perform work. Experimental testing of the MAEs used a two-segment accordion structure with fixed boundary-conditions on both ends of the PDMS substrate and a uniform magnetic field was applied to the structure. The resulting deformation roughly represented either a mountain or valley fold (dependent upon the orientation of the applied field). The resulting axial force was observed and compared to computational simulations which utilized numerical techniques to develop approximate solutions. This procedure was repeated with a prescribed displacement on one of the two fixed boundary conditions to induce bending prior to the application of a uniform magnetic field. Results show a decrease in magnetic work potential with increases in the aforementioned prescribed displacement; results also show an increase in magnetic work potential with increases in the applied magnetic field.

Analysis of magneto rheological elastomers for energy harvesting systems

2020 ◽  
Vol 64 (1-4) ◽  
pp. 439-446
Author(s):  
Gildas Diguet ◽  
Gael Sebald ◽  
Masami Nakano ◽  
Mickaël Lallart ◽  
Jean-Yves Cavaillé
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Shear Strain ◽  
Magnetic Induction ◽  
Magnetic Particles ◽  
Homogeneous Magnetic Field ◽  
Electrical Signal ◽  
Harvesting Systems ◽  
Dc Bias ◽  
Magneto Rheological

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.

scholarly journals A Comprehensive Analysis of Magnetic Field Based Indoor Positioning With Smartphones: Opportunities, Challenges and Practical Limitations

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 228548-228571
Author(s):  
Imran Ashraf ◽  
Yousaf Bin Zikria ◽  
Soojung Hur ◽  
Yongwan Park
Keyword(s):  
Magnetic Field ◽  
Indoor Positioning ◽  
Comprehensive Analysis

scholarly journals Spurious poles in the scattering of electric and magnetic charges

2020 ◽  
Vol 2020 (12) ◽  
Author(s):  
John Terning ◽  
Christopher B. Verhaaren
Keyword(s):  
Perturbation Theory ◽  
Scattering Amplitudes ◽  
Pair Production ◽  
Magnetic Particles ◽  
Single Photon ◽  
Low Energy ◽  
Magnetic Interactions ◽  
Parity Conservation ◽  
Non Local ◽  
The Way

Abstract Theories with both electric and magnetic charges (“mutually non-local” theories) have several major obstacles to calculating scattering amplitudes. Even when the interaction arises through the kinetic mixing of two, otherwise independent, U(1)’s, so that all low-energy interactions are perturbative, difficulties remain: using a self-dual, local formalism leads to spurious poles at any finite order in perturbation theory. Correct calculations must show how the spurious poles cancel in observable scattering amplitudes. Consistency requires that one type of charge is confined as a result of one of the U(1)’s being broken. Here we show how the constraints of confinement and parity conservation on observable processes manages to cancel the spurious poles in scattering and pair production amplitudes, paving the way for systematic studies of the experimental signatures of “dark” electric-magnetic processes. Along the way we demonstrate some novel effects in electric-magnetic interactions, including that the amplitude for single photon production of magnetic particles by electric particles vanishes.

scholarly journals Optical Imaging of Magnetic Particle Cluster Oscillation and Rotation in Glycerol

2021 ◽  
Vol 7 (5) ◽  
pp. 82
Author(s):  
River Gassen ◽  
Dennis Thompkins ◽  
Austin Routt ◽  
Philippe Jones ◽  
Meghan Smith ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Magnetic Particles ◽  
Magnetic Particle ◽  
Barium Hexaferrite ◽  
Optical Microscope ◽  
Simplified Model ◽  
Particle Cluster ◽  
Average Deviation ◽  
Cross Sectional

Magnetic particles have been evaluated for their biomedical applications as a drug delivery system to treat asthma and other lung diseases. In this study, ferromagnetic barium hexaferrite (BaFe12O19) and iron oxide (Fe3O4) particles were suspended in water or glycerol, as glycerol can be 1000 times more viscous than water. The particle concentration was 2.50 mg/mL for BaFe12O19 particle clusters and 1.00 mg/mL for Fe3O4 particle clusters. The magnetic particle cluster cross-sectional area ranged from 15 to 1000 μμm2, and the particle cluster diameter ranged from 5 to 45 μμm. The magnetic particle clusters were exposed to oscillating or rotating magnetic fields and imaged with an optical microscope. The oscillation frequency of the applied magnetic fields, which was created by homemade wire spools inserted into an optical microscope, ranged from 10 to 180 Hz. The magnetic field magnitudes varied from 0.25 to 9 mT. The minimum magnetic field required for particle cluster rotation or oscillation in glycerol was experimentally measured at different frequencies. The results are in qualitative agreement with a simplified model for single-domain magnetic particles, with an average deviation from the model of 1.7 ± 1.3. The observed difference may be accounted for by the fact that our simplified model does not include effects on particle cluster motion caused by randomly oriented domains in multi-domain magnetic particle clusters, irregular particle cluster size, or magnetic anisotropy, among other effects.

Magnetorheological fluid based on amorphous Fe-Si-B alloy magnetic particles

2021 ◽  
pp. 1045389X2110643
Author(s):  
Chuncheng Yang ◽  
Zhong Liu ◽  
Xiangyu Pei ◽  
Cuiling Jin ◽  
Mengchun Yu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Field Strength ◽  
Rheological Property ◽  
Magnetic Particles ◽  
Annealing Treatment ◽  
Magnetorheological Fluid ◽  
The Stability ◽  
The Magnetic Field ◽  
Amorphous Particle ◽  
Better Than

Magnetorheological fluids (MRFs) based on amorphous Fe-Si-B alloy magnetic particles were prepared. The influence of annealing treatment on stability and rheological property of MRFs was investigated. The saturation magnetization ( Ms) of amorphous Fe-Si-B particles after annealing at 550°C is 131.5 emu/g, which is higher than that of amorphous Fe-Si-B particles without annealing. Moreover, the stability of MRF with annealed amorphous Fe-Si-B particles is better than that of MRF without annealed amorphous Fe-Si-B particles. Stearic acid at 3 wt% was added to the MRF2 to enhance the fluid stability to greater than 90%. In addition, the rheological properties demonstrate that the prepared amorphous particle MRF shows relatively strong magnetic responsiveness, especially when the magnetic field strength reaches 365 kA/m. As the magnetic field intensified, the yield stress increased dramatically and followed the Herschel-Bulkley model.

THE ROTATIONAL EFFECT OF MAGNETIC PARTICLES ON CELLULAR APOPTOSIS BASED ON FOUR ELECTROMAGNET FEEDBACK CONTROL SYSTEM

2021 ◽  
pp. 2150045
Author(s):  
Jia Ji Lee ◽  
Chang Hong Pua ◽  
Misni Misran ◽  
Poh Foong Lee
Keyword(s):  
Magnetic Field ◽  
Electromagnetic Field ◽  
Control System ◽  
Feedback Control ◽  
Cell Apoptosis ◽  
Magnetic Particles ◽  
Drug Carriers ◽  
Feedback Control System ◽  
Rotational Effect ◽  
Dynamic Magnetic Field

Objectives: Magnetic drug targeting offers the latest popular alternative option to deliver magnetic drug carriers into targeting region body parts through manipulation of an external magnetic field. However, the effectiveness of using an electromagnetic field to manipulate and directing magnetic particles is yet to be established. Methods: In this paper, a homemade cost-effective electromagnet system was built for the purpose of studying the control and directing the magnetic drug carriers. The electromagnet system was built with four electromagnetic sources and tested the capability in directing the particles’ movement in different geometry patterns. Besides that, the creation of the self-rotation of individual magnetic particle clusters was achieved by using fast switching between magnetic fields. This self-rotation allows the possibility of cell apoptosis study to carry out. The system was constructed with four electromagnets integrated with a feedback control system and built to manipulate a droplet of commercially available iron (II, III) oxide nanoparticles to steer the magnetic droplet along different arbitrary trajectories (square, circle, triangle, slanted line) in 2-dimensional. Results: A dynamic magnetic field of 25 Hz was induced for magnetic nanoparticles rotational effect to observe the cell apoptosis. A profound outcome shows that the declining cell viability of the cell lines by 40% and the morphology of shrinking cells after the exposure of the dynamic magnetic field. Conclusion: The outcome from the pilot study gives an idea on the laboratory setup serves as a fundamental model for studying the electromagnetic field strength in applying mechanical force to target and to rotate for apoptosis on cancer cell line study.

scholarly journals Tunable Adhesion of a Bio-Inspired Micropillar Arrayed Surface Actuated by a Magnetic Field

2018 ◽  
Vol 86 (1) ◽  
Author(s):  
Xingji Li ◽  
Zhilong Peng ◽  
Yazheng Yang ◽  
Shaohua Chen
Keyword(s):  
Magnetic Field ◽  
Applied Magnetic Field ◽  
Magnetic Particles ◽  
Rotation Angle ◽  
Adhesion Force ◽  
Practical Applications ◽  
Section Shape ◽  
Theoretical Predictions ◽  
Large Elastic Deformation ◽  
The Difference

Bio-inspired functional surfaces attract many research interests due to the promising applications. In this paper, tunable adhesion of a bio-inspired micropillar arrayed surface actuated by a magnetic field is investigated theoretically in order to disclose the mechanical mechanism of changeable adhesion and the influencing factors. Each polydimethylsiloxane (PDMS) micropillar reinforced by uniformly distributed magnetic particles is assumed to be a cantilever beam. The beam's large elastic deformation is obtained under an externally magnetic field. Specially, the rotation angle of the pillar's end is predicted, which shows an essential effect on the changeable adhesion of the micropillar arrayed surface. The larger the strength of the applied magnetic field, the larger the rotation angle of the pillar's end will be, yielding a decreasing adhesion force of the micropillar arrayed surface. The difference of adhesion force tuned by the applied magnetic field can be a few orders of magnitude, which leads to controllable adhesion of such a micropillar arrayed surface. Influences of each pillar's cross section shape, size, intervals between neighboring pillars, and the distribution pattern on the adhesion force are further analyzed. The theoretical predictions are qualitatively well consistent with the experimental measurements. The present theoretical results should be helpful not only for the understanding of mechanical mechanism of tunable adhesion of micropillar arrayed surface under a magnetic field but also for further precise and optimal design of such an adhesion-controllable bio-inspired surface in future practical applications.

Study of the Performance of Practical Magneto-Rheological Elastomers

2012 ◽  
Vol 430-432 ◽  
pp. 1979-1983
Author(s):  
Wei Bang Feng ◽  
Xue Yang ◽  
Zhi Qiang Lv
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Mechanical Property ◽  
Magnetic Properties ◽  
External Magnetic Field ◽  
Magnetic Particles ◽  
Poor Performance ◽  
Electrical And Magnetic Properties ◽  
Intelligent Material ◽  
Magneto Rheological

Magneto-rheological elastomer( MR elastomer) is an emerging intelligent material made up of macromolecule polymer and magnetic particles. While a promising wide application it has in the fields of warships vibration controlling for its controllable mechanical, electrical and magnetic properties by external magnetic field, design and application of devices based on it are facing great limitations imposed by its poor performance in mechanical properties and magneto effect. Aiming at developing a practical MR elastomer, a new confecting method was proposed in this paper. Then, following this new method and using a specificly designed solidifying matrix, an amido- polyester MR elastomer was developed with its mechanical property systemically explored.

Sign in / Sign up

Export Citation Format

Share Document