A self-powered high-performance photodetector based on a MoS2/GaAs heterojunction with high polarization sensitivity

2019 ◽  
Vol 7 (13) ◽  
pp. 3817-3821 ◽  
Author(s):  
Cheng Jia ◽  
Di Wu ◽  
Enping Wu ◽  
Jiawen Guo ◽  
Zhihui Zhao ◽  
...  

A high-performance self-powered photodetector based on a MoS2/GaAs heterojunction was demonstrated, which demonstrated a high responsivity, specific detectivity, fast response speeds, as well as high polarization sensitivity.

2018 ◽  
Vol 6 (2) ◽  
pp. 299-303 ◽  
Author(s):  
Ranran Zhuo ◽  
Yuange Wang ◽  
Di Wu ◽  
Zhenhua Lou ◽  
Zhifeng Shi ◽  
...  

Self-powered MoS2/GaN p–n heterojunction photodetectors exhibited high sensitivity to deep-UV light with high responsivity, specific detectivity and fast response speeds.


2018 ◽  
Vol 6 (18) ◽  
pp. 4861-4865 ◽  
Author(s):  
Yuange Wang ◽  
Xiaowen Huang ◽  
Di Wu ◽  
Ranran Zhuo ◽  
Enping Wu ◽  
...  

High-performance room-temperature infrared photodetectors based on MoS2/CdTe p–n heterojunction with broadband response, high responsivity, specific detectivity as well as fast response speed were demonstrated.


2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Ting Zhang ◽  
Shibin Li

AbstractIn this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offer higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film quality that always occur in a single-step solution process. The introduced diethyl ether in spin-coating process is demonstrated to be successful, and the effects of the anti-solvent on film quality are studied. The devices fabricated using the methods achieve high-performance, self-powered and the stabilized photodetectors show fast response speed. The results illustrate a great potential of all-inorganic CsPbIxBr3−x perovskites in visible photodetection and provide an effective way to achieve high performance devices with self-powered capability.


2021 ◽  
Vol 9 (14) ◽  
pp. 4799-4807
Author(s):  
Yong Zhang ◽  
Weidong Song

P-CuZnS/n-GaN UV photodetector is prepared by a simple chemical bath deposition, showing excellent self-powered properties, including ultrahigh on/off ratio (3 × 108), fast response speed (0.14/40 ms) and large detectivity of 3 × 1013 Jones.


2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhuang Hui ◽  
Ming Xiao ◽  
Daozhi Shen ◽  
Jiayun Feng ◽  
Peng Peng ◽  
...  

Abstract With the increase in the use of electronic devices in many different environments, a need has arisen for an easily implemented method for the rapid, sensitive detection of liquids in the vicinity of electronic components. In this work, a high-performance power generator that combines carbon nanoparticles and TiO2 nanowires has been fabricated by sequential electrophoretic deposition (EPD). The open-circuit voltage and short-circuit current of a single generator are found to exceed 0.7 V and 100 μA when 6 μL of water was applied. The generator is also found to have a stable and reproducible response to other liquids. An output voltage of 0.3 V was obtained after 244, 876, 931, and 184 μs, on exposure of the generator to 6 μL of water, ethanol, acetone, and methanol, respectively. The fast response time and high sensitivity to liquids show that the device has great potential for the detection of small quantities of liquid. In addition, the simple easily implemented sequential EPD method ensures the high mechanical strength of the device. This compact, reliable device provides a new method for the sensitive, rapid detection of extraneous liquids before they can impact the performance of electronic circuits, particularly those on printed circuit board.


2019 ◽  
Vol 7 (4) ◽  
pp. 917-925 ◽  
Author(s):  
Yujin Liu ◽  
Guobiao Cen ◽  
Gai Wang ◽  
Junwei Huang ◽  
Suhang Zhou ◽  
...  

Self-powered, fast-response heterojunction photodetectors based on nanoporous pyramid Si arrays are successfully developed. The photodetector is further integrated into a visible light communication system as an optical signal receiver.


RSC Advances ◽  
2016 ◽  
Vol 6 (89) ◽  
pp. 85951-85957 ◽  
Author(s):  
Shiming Ni ◽  
Qingjiang Yu ◽  
Yuewu Huang ◽  
Jianan Wang ◽  
Lin Li ◽  
...  

A heterostructured TiO2/MgO NWAs based UVPD exhibits a high responsivity and fast response, together with excellent spectral selectivity.


2020 ◽  
Author(s):  
Ting Zhang ◽  
Shibin Li

Abstract In this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offers higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film quality that always occur in a single-step solution process. The introduced diethyl ether in spin-coating process is demonstrated to be successful, and the effects of the anti-solvent on film quality are studied. The devices fabricated using the methods achieve a high-performance, self-powered and stabilized photodetectors with fast response speed. The results illustrate a great potential of all-inorganic CsPbIxBr3−x perovskites in visible photodetection and provide an effective way to achieve high performance devices with self-powered capability.


2021 ◽  
Vol 3 (9) ◽  
pp. 4135-4143
Author(s):  
Hongzhu Wu ◽  
Chuanhe Ma ◽  
Jiyue Zhang ◽  
Hechun Cao ◽  
Ruobing Lin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document