Overcoming solid handling issues in continuous flow substitution reactions through ionic liquid formation

2018 ◽  
Vol 20 (8) ◽  
pp. 1748-1753 ◽  
Author(s):  
Saeed K. Kashani ◽  
Ryan J. Sullivan ◽  
Mads Andersen ◽  
Stephen G. Newman
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Continuous Flow ◽  
Substitution Reactions ◽  
Liquid Formation

Continuous flow reactions, often plagued by precipitation and clogging problems, can be easily performed by selecting bases that form ionic liquids upon protonation.

Carbonate Based Ionic Liquid Synthesis (CBILS®): development of the continuous flow method for preparation of ultra-pure ionic liquids

2017 ◽  
Vol 2 (4) ◽  
pp. 432-436 ◽  
Author(s):  
Roland S. Kalb ◽  
Markus Damm ◽  
Sergey P. Verevkin
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Continuous Flow ◽  
Solution Calorimetry ◽  
Flow Method ◽  
Highly Sensitive ◽  
Continuous Flow Method ◽  
Analytical Verification

Development of a new continuous flow method for preparation of ultra-pure ionic liquids; analytical verification includes highly sensitive combustion and solution calorimetry.

Mapping the “Extra Solvent Power, ESP” of Ionic Liquids for Monomers, Polymers and Globular Nanoparticles

2017 ◽  
Author(s):  
Jose A. Pomposo
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Linear Polymers ◽  
Green Solvents ◽  
Ionic Polymers ◽  
First Time ◽  
Solvent Power

Understanding the miscibility behavior of ionic liquid (IL) / monomer, IL / polymer and IL / nanoparticle mixtures is critical for the use of ILs as green solvents in polymerization processes, and to rationalize recent observations concerning the superior solubility of some proteins in ILs when compared to standard solvents. In this work, the most relevant results obtained in terms of a three-component Flory-Huggins theory concerning the “Extra Solvent Power, ESP” of ILs when compared to traditional non-ionic solvents for monomeric solutes (case I), linear polymers (case II) and globular nanoparticles (case III) are presented. Moreover, useful ESP maps are drawn for the first time for IL mixtures corresponding to case I, II and III. Finally, a potential pathway to improve the miscibility of non-ionic polymers in ILs is also proposed.

Dynamics of Ion Locking in Doubly Polymerized Ionic Liquids

2020 ◽  
Author(s):  
Swati Arora ◽  
Julisa Rozon ◽  
Jennifer Laaser
Keyword(s):  
Dielectric Constant ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Ion Pairs ◽  
Polymer Chains ◽  
Ion Motion ◽  
Charged Species ◽  
Broadband Dielectric Spectroscopy ◽  
Covalently Linked ◽  
Insight Into

<div>In this work, we investigate the dynamics of ion motion in “doubly-polymerized” ionic liquids (DPILs) in which both charged species of an ionic liquid are covalently linked to the same polymer chains. Broadband dielectric spectroscopy is used to characterize these materials over a broad frequency and temperature range, and their behavior is compared to that of conventional “singly-polymerized” ionic liquids (SPILs) in which only one of the charged species is attached to the polymer chains. Polymerization of the DPIL decreases the bulk ionic conductivity by four orders of magnitude relative to both SPILs. The timescales for local ionic rearrangement are similarly found to be approximately four orders of magnitude slower in the DPILs than in the SPILs, and the DPILs also have a lower static dielectric constant. These results suggest that copolymerization of the ionic monomers affects ion motion on both the bulk and the local scales, with ion pairs serving to form strong physical crosslinks between the polymer chains. This study provides quantitative insight into the energetics and timescales of ion motion that drive the phenomenon of “ion locking” currently under investigation for new classes of organic electronics.</div>

Ionic Liquid Assisted Synthesis of Some 2-Aminobenzenethiols

2019 ◽  
Vol 16 (7) ◽  
pp. 550-555
Author(s):  
Dinesh K. Jangid ◽  
Keshav L. Ameta ◽  
Surbhi Dhadda ◽  
Anjali Guleria ◽  
Prakash G. Goswami ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Comparative Study ◽  
Maximum Yield ◽  
Efficient Synthesis ◽  
Target Molecules ◽  
Presence And Absence

Ionic Liquid assisted efficient synthesis of some 2-aminobenzenethiols has been reported using three different Ionic Liquids (ILs) namely methylimidazolium tetrafluoroborate [MIM]+[BF4]−, methylimidazolium chloride [MIM]+[Cl]− and methylimidazolium nitrate [MIM]+[NO3]−. A comparative study has been carried out for the synthesis of target molecules in the presence and absence of IL, leading to conclusion that maximum yield has been observed with [MIM]+[BF4]−.

Dispersive Liquid-Liquid Microextraction Based on Ionic Liquid and Spectrophotometric Determination of Bilirubin in Biological Samples

2020 ◽  
Vol 16 (5) ◽  
pp. 652-659
Author(s):  
Asiye A. Avan ◽  
Hayati Filik
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Biological Samples ◽  
Urine Samples ◽  
Spectrophotometric Detection ◽  
Full Color ◽  
Dispersive Liquid Liquid Microextraction ◽  
Urine And Serum ◽  
Liquid Microextraction

Background: An Ionic Liquid-based based Dispersive Liquid-Liquid Microextraction (IL-DLLME) method was not applied to preconcentration and determination of bilirubin. Ionic Liquids (ILs) are new chemical compounds. In recent years, Ionic Liquids (ILs) have been employed as alternative solvents to toxic organic solvents. Due to these perfect properties, ILs have already been applied in many analytical extraction processes, presenting high extraction yield and selectivity for analytes. Methods: In this study, IL-DLLME was applied to biological samples (urine and serum) for the spectrophotometric detection of bilirubin. For bilirubin analysis, the full-color development was based on the reaction with periodate in the presence of hydrochloric acid. The high affinity of bilirubin for the ionic liquid phase gave extraction percentages above 98% in 0.3 M HCl solution. Results: Several IL-extraction parameters were optimized and room temperature ionic liquid 1-butyl- 1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide and ethanol were used as extraction and disperser solution. The linear range was found in the range of 0.5-6.0 μM (0.3-3.5 μg mL-1) and the limits of detection of the proposed method was 0.5 μM (0.3 μg mL-1). The proposed method was applied for the preconcentration and separation of trace bilirubin in real urine samples. Also, the recoveries for bilirubin in spiked biological samples (urine and serum) were found to be acceptable, between 95-102%. Conclusion: The proposed IL-DLLMEapproach was employed for the enrichment and determination of trace levels of bilirubin in urine samples using NaIO4 as an oxidizing agent and Uv-vis spectrophotometric detection. The periodate oxidation of bilirubin is rapid, effective, selective, and simple to perform. The method contains only HCl, NaOI4, and an anionic surfactant. The method may be useful for economizing in the consumption of reagents in bilirubin determining. The IL-DLLMEmethod ensures a high yield and has a low toxicity no skin sensitization, no mutagenicity and no ecotoxicity in an aquatic environment since only very low quantities of an IL is required. For full-color formation, no any extra auxiliary reagents are required. Besides, the IL-DLLME technique uses a low-cost instrument such as Uv-vis which is present in most of the medical laboratories.

scholarly journals Ion conformation and orientational order in a dicationic ionic liquid crystal studied by solid-state nuclear magnetic resonance spectroscopy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Debashis Majhi ◽  
Sergey V. Dvinskikh
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Liquid Crystals ◽  
Bond Order ◽  
Van Der Waals ◽  
Orientational Order ◽  
Smectic Phase ◽  
Side Chains ◽  
Dicationic Ionic Liquid ◽  
Ionic Liquid Crystals

AbstractIonic liquids crystals belong to a special class of ionic liquids that exhibit thermotropic liquid-crystalline behavior. Recently, dicationic ionic liquid crystals have been reported with a cation containing two single-charged ions covalently linked by a spacer. In ionic liquid crystals, electrostatic and hydrogen bonding interactions in ionic sublayer and van der Waals interaction in hydrophobic domains are the main forces contributing to the mesophase stabilization and determining the molecular orientational order and conformation. How these properties in dicationic materials are compared to those in conventional monocationic analogs? We address this question using a combination of advanced NMR methods and DFT analysis. Dicationic salt 3,3′-(1,6-hexanediyl)bis(1-dodecylimidazolium)dibromide was studied. Local bond order parameters of flexible alkyl side chains, linker chain, and alignment of rigid polar groups were analyzed. The dynamic spacer effectively “decouples” the motion of two ionic moieties. Hence, local order and alignment in dicationic mesophase were similar to those in analogous single-chain monocationic salts. Bond order parameters in the side chains in the dicationic smectic phase were found consistently lower compared to double-chain monocationic analogs, suggesting decreasing contribution of van der Waals forces. Overall dication reorientation in the smectic phase was characterized by low values of orientational order parameter S. With increased interaction energy in the polar domain the layered structure is stabilized despite less ordered dications. The results emphasized the trends in the orientational order in ionic liquid crystals and contributed to a better understanding of interparticle interactions driving smectic assembly in this and analogous ionic mesogens.

scholarly journals Controlled Nanostructuration of Cobalt Oxyhydroxide Electrode Material for Hybrid Supercapacitors

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2325
Author(s):  
Ronan Invernizzi ◽  
Liliane Guerlou-Demourgues ◽  
François Weill ◽  
Alexia Lemoine ◽  
Marie-Anne Dourges ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Energy Storage ◽  
Specific Surface ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Hybrid Supercapacitors ◽  
Cobalt Oxyhydroxide ◽  
Precipitation Medium ◽  
The Impact

Nanostructuration is one of the most promising strategies to develop performant electrode materials for energy storage devices, such as hybrid supercapacitors. In this work, we studied the influence of precipitation medium and the use of a series of 1-alkyl-3-methylimidazolium bromide ionic liquids for the nanostructuration of β(III) cobalt oxyhydroxides. Then, the effect of the nanostructuration and the impact of the different ionic liquids used during synthesis were investigated in terms of energy storage performances. First, we demonstrated that forward precipitation, in a cobalt-rich medium, leads to smaller particles with higher specific surface areas (SSA) and an enhanced mesoporosity. Introduction of ionic liquids (ILs) in the precipitation medium further strongly increased the specific surface area and the mesoporosity to achieve well-nanostructured materials with a very high SSA of 265 m2/g and porosity of 0.43 cm3/g. Additionally, we showed that ILs used as surfactant and template also functionalize the nanomaterial surface, leading to a beneficial synergy between the highly ionic conductive IL and the cobalt oxyhydroxide, which lowers the resistance charge transfer and improves the specific capacity. The nature of the ionic liquid had an important influence on the final electrochemical properties and the best performances were reached with the ionic liquid containing the longest alkyl chain.

Sign in / Sign up

Export Citation Format

Share Document