Zeta potential-assisted sorption of uranyl tricarbonate complex from aqueous solution by polyamidoxime-functionalized colloidal particles

2016 ◽  
Vol 18 (18) ◽  
pp. 13026-13032 ◽  
Author(s):  
Lixia Zhang ◽  
Li Huang ◽  
Zehua Zeng ◽  
Jun Qian ◽  
Daoben Hua
Keyword(s):  
Aqueous Solution ◽  
Zeta Potential ◽  
Colloidal Particles ◽  
New Method

A new method has been developed for effective uranium(vi) capture from an aqueous solution through zeta potential-assisted sorption.

Phosphonate-functionalized polystyrene microspheres with controlled zeta potential for efficient uranium sorption

RSC Advances ◽  
2016 ◽  
Vol 6 (78) ◽  
pp. 74110-74116 ◽  
Author(s):  
Zehua Zeng ◽  
Sen Yang ◽  
Lixia Zhang ◽  
Daoben Hua
Keyword(s):  
Aqueous Solution ◽  
Zeta Potential ◽  
New Method ◽  
Polystyrene Microspheres ◽  
Zeta Potentials

A new method has been developed for effective uranium(vi) sorption from aqueous solution through phosphonate-functionalized polystyrene microspheres with controlled zeta potentials.

How to use alum with cationic dispersed rosin size

TAPPI Journal ◽  
2016 ◽  
Vol 15 (5) ◽  
pp. 331-335 ◽  
Author(s):  
LEBO XU ◽  
JEREMY MYERS ◽  
PETER HART
Keyword(s):  
Zeta Potential ◽  
Colloidal Particles ◽  
Streaming Potential ◽  
Excessive Amount ◽  
Paper Machine ◽  
Optimum Amount ◽  
Potential Measurement ◽  
Streaming Current ◽  
Wide Range ◽  
Laboratory Results

Retention of cationic dispersed rosin size was studied via turbidity measurements on stock filtrate with different alum and dispersed rosin size dosages. Stock charge characteristics were analyzed using both an analysis of charge demand determined via a streaming current detector and an evaluation of zeta potential of the fibers by streaming potential measurement. The results indicated that an optimum amount of alum existed such that good sizing retention was maintained throughout a wide range of dispersed rosin size dosages. However, when an excessive amount of alum was used and fines and colloidal particles were transitioned from anionic to cationic, the cationic size retention was reduced. Laboratory results were confirmed with a paper machine trial. All data suggested that a stock charge study was necessary to identify optimal alum dosage for a cationic dispersed rosin sizing program.

scholarly journals Evaluation of N-Alkyl-bis-o-aminobenzamide Receptors for the Determination and Separation of Metal Ions by Fluorescence, UV-Visible Spectrometry and Zeta Potential

Molecules ◽  
2019 ◽  
Vol 24 (9) ◽  
pp. 1737 ◽  
Author(s):  
Marisela Martinez-Quiroz ◽  
Xiomara E. Aguilar-Martinez ◽  
Mercedes T. Oropeza-Guzman ◽  
Ricardo Valdez ◽  
Eduardo A. Lopez-Maldonado
Keyword(s):  
Aqueous Solution ◽  
Zeta Potential ◽  
Metal Ions ◽  
Environmental Concern ◽  
Separation Of Metal Ions ◽  
Complexing Capacity ◽  
Alkyl Groups ◽  
Molecular Fluorescence ◽  
Uv Visible ◽  
Phase Sensor

This paper presents the synthesis and evaluation of physicochemical behavior of a new series of N-alkyl-bis-o-aminobenzamides (BOABs) in aqueous solution. The study was targeted to the complexing capacity of five metal ions (Fe2+, Cu2+, Cd2+, Hg2+ and Pb2+) of environmental concern as the medullar principle of a liquid phase sensor for its application in the determination of these metal ions due to its versatility of use. Molecular fluorescence, UV-visible and Zeta potential were measured for five BOABs and the effect of alkyl groups with different central chain length (n = 3, 4, 6, 8 and 10) on physicochemical performance determined. The results have shown that these derivatives present higher sensibility and selectivity for Cu2+ even in the presence of the other metal ions. An additional application test was done adding a pectin (0.1 wt %) solution to the BOAB-Cu+2 complex to obtain a precipitate (flocs) as a potential selective separation process of Cu from aqueous solution. The solid was then lyophilized and analyzed by SEM-EDS, the images showed spheric forms containing Cu+2 with diameter of approximately of 8 μm and 30 wt %.

scholarly journals ADSORBATIVE SEPARATION OF DOXYCYCLINE FROM AQUEOUS SOLUTION WITH N,N-DIETHYL N-METHYL CHITOSAN, GUM AND POLYACRYLIC ACID BASED HYDROGELS

2021 ◽  
Vol 11 (07) ◽  
pp. 44-53
Author(s):  
Mirvari Hasanova Mirvari Hasanova
Keyword(s):  
Aqueous Solution ◽  
Ion Exchange ◽  
Zeta Potential ◽  
Polyacrylic Acid ◽  
Inorganic Materials ◽  
Biologically Active ◽  
Cross Linking ◽  
Separation And Purification ◽  
Inorganic Substances ◽  
The Cross

The separation and purification of antibiotics with sorption by ion-exchange materials, as well as their delivery in biological processes by immobilization, are now widely used in biotechnology. There are many scientific studies in the literature on the sorption of antibiotics by polymer-based sorbents and inorganic materials, as well as the study of thermodynamics and kinetics of the process. In the literature, the acquisition of biologically active systems from the sorption of antibiotics by ion-exchange fibers based on various polymers and inorganic substances was carried out. However, the synthesis of selective gels for the effective separation of doxycycline and its delivery in different pH mediums by sorption with biodegradable, biocompatible polysaccharide-containing composites is one of the topical issues. Gel was synthesized from the cross-linking of N,N-diethyl N-methyl derivative of a natural polyaminosaccharide of chitosan by glutaric aldehyde. Also, pH-sensitive hydrogels that can swollen in water were synthesized from the cross-linking of a graft copolymer of cherry source gummiarabic with N-vinylpyrrolidone, as well as synthetic polymer polyacrylic acid with N,N-methylene-bis-acrylamide. The structure of the gels were identified by FTIR and NMR spectroscopy, and the sorption of doxycycline antibiotic from an aqueous solution was investigated. According to the values of zeta potential, the protonation of functional groups in the main macromolecule in an acidic medium leads to a value of zeta potential of 40÷80 mV on the surface of chitosan-based gel and others. Although the chemical structure is different, the isoelectric point is set around pH=6÷8 for all three hydrogels. The dependences of the sorption process on the amount of gels, antibiotic concentration, temperature, and pH medium were studied. The experimental data were analyzed using two adsorption models, Langmuir and Freundlich, with the later system providing the best fit. Doxycycline is adsorbed on the surface of chitosan, gummiarabic and polyacrylic acid based hydrogel composite through by physical interactions. Also, the results of thermodynamic parameters ΔG40 kJ/mol show that the nature of the adsorption process is physical, and spontaneous, too. Keywords: Chitosan, Gummiarabic-arabinogalactane, polyacrylic acid, hydrogel, sorption isoterms, doxycycline, thermodynamica.

STUDY ON NEW ICE SLURRY GENERATOR USING NaCl AQUEOUS SOLUTION AT LOW CONCENTRATION

2013 ◽  
Vol 21 (01) ◽  
pp. 1350004 ◽  
Author(s):  
KOJI FUMOTO ◽  
TSUYOSHI KAWANAMI ◽  
TAKAO INAMURA
Keyword(s):  
Aqueous Solution ◽  
High Pressure ◽  
Test Section ◽  
Freezing Point ◽  
New Method ◽  
Heat Of Fusion ◽  
Test Fluid ◽  
Ice Slurry ◽  
Slurry Ice ◽  
Experimental Apparatus

A cold thermal energy storage system has been developed for HVAC. There are many ice-based cooling systems operating around the world. Ice slurry, which is a mixture of fine ice crystals and liquid water, is utilized in ice storage systems owing to its good flowability and large latent heat of fusion. For slurry ice production techniques, there are presently a number of commercially available ice slurry generators (e.g., Supercooled slurry ice generator, Scraper type generator, and Vacuum type generator, etc.). In the present study, a new method was developed to generate ice slurry without the deposition of an ice layer on a cooled surface. The basic components of the experimental apparatus is a cooling brine circulating loop, a high pressure pump, a valve, an aqueous solution flow loop containing the test section, which is made of transparent acrylic, and the associated instrumentation. This new method is based on freezing-point depression of the aqueous solution, which is maintained under high-pressure conditions. To control the timing for solidification and to generate ice slurry, we investigated the relationships among the pressure and temperature of the aqueous solution. The freezing phenomenon of the aqueous solution in the test section was observed in detail. As a result, we developed a new ice slurry generator based on the new method that controls the pressure and temperature of the aqueous solution. Experimental results showed that the characteristics of the ice slurry generation were closely related to the pressure and initial stage temperature of the test fluid. Finally, the optimum operation condition of the ice slurry generator based on visualization experiment was discussed.

7. Researches on Micro-Organisms, including ideas of a new Method for their Destruction in certain cases of Contagious Diseases. Part II

1889 ◽  
Vol 15 ◽  
pp. 33-63
Author(s):  
A. B. Griffiths
Keyword(s):  
Aqueous Solution ◽  
Title I ◽  
Royal Society ◽  
New Method ◽  
Contagious Diseases ◽  
Pathogenic Organisms ◽  
Micro Organisms

In the Proceedings of the Royal Society of Edinburgh, vol. xiv. [No. 123], pp. 97–106, there is a paper of mine under the above title. I wish in the present memoir to communicate to your distinguished Society further details relative to these investigations. The principle of these researches is to find some germicidal agent capable of destroying the microbes of disease, which have been proved to reside in the blood, and are the causes (directly or indirectly) of certain contagious diseases. At the same time, an aqueous solution of such an agent, while destroying the microbes of disease, must have very little or no detrimental action upon the blood. Having found such a substance, the rationale is to inject (hypodermically) a solution of the microbe-destroyer directly into the blood. By so doing, the destruction of the pathogenic organisms in situ would be the result.

Sign in / Sign up

Export Citation Format

Share Document