High Hydrogen Storage Capacity of Porous Carbons Prepared by Using Activated Carbon

2009 ◽  
Vol 131 (20) ◽  
pp. 7016-7022 ◽  
Author(s):  
Huanlei Wang ◽  
Qiuming Gao ◽  
Juan Hu
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Storage Capacity ◽  
Porous Carbons ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen

Pressure Isotherms of Hydrogen Adsorption in Carbon Nanostructures

2001 ◽  
Vol 706 ◽  
Author(s):  
Xiaohong Chen ◽  
Urszula Dettlaff-Weglikowska ◽  
Miroslav Haluska ◽  
Martin Hulman ◽  
Siegmar Roth ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Activated Carbon ◽  
Hydrogen Storage ◽  
Carbon Nanostructures ◽  
Room Temperature ◽  
Storage Capacity ◽  
Hydrogen Adsorption ◽  
Single Wall Carbon Nanotubes ◽  
Hydrogen Storage Capacity ◽  
Carbon And Graphite

AbstractThe hydrogen adsorption capacity of various carbon nanostructures including single-wall carbon nanotubes, graphitic nanofibers, activated carbon, and graphite has been measured as a function of pressure and temperature. Our results show that at room temperature and a pressure of 80 bar the hydrogen storage capacity is less than 1 wt.% for all samples. Upon cooling, the capacity of hydrogen adsorption increases with decreasing temperature and the highest value was observed to be 2.9 wt. % at 50 bar and 77 K. The correlation between hydrogen storage capacity and specific surface area is discussed.

scholarly journals Recent advances on the thermal destabilization of Mg-based hydrogen storage materials

RSC Advances ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 408-428 ◽  
Author(s):  
Jianfeng Zhang ◽  
Zhinian Li ◽  
Yuanfang Wu ◽  
Xiumei Guo ◽  
Jianhua Ye ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Storage Capacity ◽  
Magnesium Hydride ◽  
Hydrogen Storage Materials ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen ◽  
Storage Materials ◽  
Recent Advances

Magnesium hydride and its compounds have a high hydrogen storage capacity and are inexpensive, and thus have been considered as one of the most promising hydrogen storage materials for on-board applications.

Regeneration of Ammonia-Borane Complex for Hydrogen Storage

2005 ◽  
Vol 884 ◽  
Author(s):  
Nahid Mohajeri ◽  
Ali T-Raissi
Keyword(s):  
Hydrogen Storage ◽  
Energy Efficient ◽  
Storage Capacity ◽  
Storage System ◽  
Cost Effective ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen ◽  
The Past ◽  
Hydrogen Storage System ◽  
Energy Center

AbstractAt the Florida Solar Energy Center (FSEC), a research program is underway for developing a high-density hydrogen storage system based on amine-borane (AB) complexes. Due to their high hydrogen capacity, these hydrides have been employed, in the past, as disposable hydrogen sources for fuel cell applications. However, to meet the requirements for hydrogen storage onboard vehicles, it is essential that cost effective and energy efficient methods for the regeneration (i.e. hydrogenation) of the spent (dehydrogenated) AB complexes can be found that utilize only hydrogen and/or electricity (i.e. the only plausible hydrogen economy energy carriers).We are studying two ammoniaborane (NH3BH3)-based systems with high hydrogen storage capacity. The first system employs a borazine-cyclotriborazane cycle. Borazine is a product of NH3BH3 thermolysis. Cyclotriborazane is the inorganic analog of cyclohexane. The second system employs polymeric AB complexes such as poly-(aminoborane) and polyborazylene. Poly-(aminoborane), an inorganic analog of polyethylene, is also a product of amoniaborane thermolysis whilepolyborazylene is the product of borazine thermolysis.For the two systems above, we are developing regeneration (i.e. reduction of borazine, poly-(aminoborane) and polyborazylene) schemes based on: 1) catalytic hydrogenation and 2) indirect (multi-step) synthesis techniques.

scholarly journals Ultra-high hydrogen storage capacity of holey graphyne

2021 ◽  
Author(s):  
qingfang Li ◽  
Yan Gao ◽  
Huanian Zhang ◽  
Hongzhe Pan ◽  
Qing Fang Li ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Storage Capacity ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen

High hydrogen storage capacity in calcium-decorated silicene nanostructures

2015 ◽  
Vol 252 (9) ◽  
pp. 2072-2078 ◽  
Author(s):  
Feng Li ◽  
Changwen Zhang ◽  
Wei-Xiao Ji ◽  
Mingwen Zhao
Keyword(s):  
Hydrogen Storage ◽  
Storage Capacity ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen

NbF5 and CrF3 Catalysts Effects on Synthesis and Hydrogen Storage Performance of Mg-Ni-NiO Composites

2013 ◽  
Vol 681 ◽  
pp. 31-37
Author(s):  
Qi Wan ◽  
Ping Li ◽  
Teng Wang ◽  
Xuan Hui Qu
Keyword(s):  
Hydrogen Storage ◽  
Hydrogen Pressure ◽  
Storage Capacity ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen ◽  
Hydrogen Capacity ◽  
Storage Performance ◽  
Desorption Temperature ◽  
Hydrogen Storage Performance ◽  
Potential Use

Two kinds of novel materials, Mg-1.6mol%Ni-0.4mol%NiO-2mol%MF (MF=NbF5, CrF3), along with Mg-1.6mol%Ni-0.4mol%NiO for comparison, were examined for their potential use in hydrogen storage applications, having been fabricated via cryomilling. The effects of NbF5 and CrF3 on hydrogen storage performance were investigated. A microstructure analysis showed that, aside from the main phase Mg, Ni and NiO phases, NbO, MgF2 and Mg2Ni were present in all samples after ball milling, MgH2 and NbH2 were observed in all samples after absorption. The CrF3-containing composite exhibited a good PCT results and a low onset desorption temperature under 0.1 MPa. The NbF5-containing composite exhibited a low absorption temperature of 323 K, a high hydrogen storage capacity of 4.03wt% at 373 K under the hydrogen pressure of 4.0 MPa, and it absorbed 90% of its full hydrogen capacity in 2700 sec and 100% in 5100 sec, it desorbed more than 1.8wt% in 3600 sec under vacuum environment. The CrF3-doped sample exhibited a low onset desorption temperature of 543 K under 0.1 MPa, and a low hysteresis coefficient of 0.25 at 573 K, and lower than 0.2 when temperature was 623 K. NbO and NbH2 played an important role in improving the absorption and desorption performance.

scholarly journals Mixed-linker approach in designing porous zirconium-based metal–organic frameworks with high hydrogen storage capacity

2016 ◽  
Vol 52 (50) ◽  
pp. 7826-7829 ◽  
Author(s):  
Ayesha Naeem ◽  
Valeska P. Ting ◽  
Ulrich Hintermair ◽  
Mi Tian ◽  
Richard Telford ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
High Selectivity ◽  
Storage Capacity ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
Hydrogen Uptake ◽  
Hydrogen Storage Capacity ◽  
High Hydrogen ◽  
Metal Organic ◽  
Adsorption Of Co

New zirconium based metal–organic framework (UBMOF-31) synthesised using mixed-linker strategy showing permanent porosity, excellent hydrogen uptake, and high selectivity for adsorption of CO2 over N2.

Hydrogen storage capacity of selected activated carbon electrodes made from brown coal

2016 ◽  
Vol 41 (48) ◽  
pp. 23099-23108 ◽  
Author(s):  
Amandeep Singh Oberoi ◽  
John Andrews ◽  
Alan L. Chaffee ◽  
Lachlan Ciddor
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Brown Coal ◽  
Storage Capacity ◽  
Carbon Electrodes ◽  
Hydrogen Storage Capacity
Sign in / Sign up

Export Citation Format

Share Document