scholarly journals Encapsulation of Cerium Nitrate within Poly(urea-formaldehyde) Microcapsules for the Development of Self-Healing Epoxy-Based Coating

ACS Omega ◽  
2021 ◽  
Author(s):  
Gholamali Farzi ◽  
Ali Davoodi ◽  
Ali Ahmadi ◽  
Rasoul Esmaeely Neisiany ◽  
Md. Khalid Anwer ◽  
...  
Keyword(s):  
Urea Formaldehyde ◽  
Cerium Nitrate ◽  
Self Healing

scholarly journals Effect of Urea-Formaldehyde (UF) with Waterborne Emulsion Microcapsules on Properties of Waterborne Acrylic Coatings Based on Coating Process for American Lime

2020 ◽  
Vol 10 (18) ◽  
pp. 6341 ◽  
Author(s):  
Xiaoxing Yan ◽  
Wenting Zhao ◽  
Xingyu Qian
Keyword(s):  
Urea Formaldehyde ◽  
Paint Film ◽  
Coating Process ◽  
Self Healing ◽  
Waterborne Coatings ◽  
Aging Resistance ◽  
Acrylic Coatings ◽  
Waterborne Emulsion ◽  
The Impact ◽  
Good Coating

The purpose of this paper is to explore the effect of urea-formaldehyde (UF) with waterborne emulsion microcapsules on the optical, mechanical and aging resistance properties of waterborne coatings from the perspective of coating process. In this paper, the microcapsules were prepared with UF resin as the wall materials and waterborne emulsion as the core materials. Based on the coating process, the optical, mechanical and aging resistance properties of the waterborne acrylic coatings with microcapsules for American lime were tested. The good coating process is three layers of primer, two layers of topcoat, and adding microcapsules into primer. The results showed that the coating process had little effect on the color difference of the paint film with microcapsules, the gloss of the paint film prepared by the good coating process was basically not changed, and the mechanical properties of the paint film were good. At this time, the hardness grade of the paint film was 3H, the adhesion was grade 0, the impact resistance was 110.0 N·cm−2, and the elongation at break was 29.7%. The microcapsules added to the primer had better liquid resistance than those added to the topcoat. The paint film had good stability and aging resistance, and could inhibit the generation of microcracks to a certain extent. The paint film prepared by the good coating process had better comprehensive performance. This work provides a technical reference for self-healing of the waterborne coatings on American lime.

Temperature Profile of Microencapsulation for Self-Healing Application

2010 ◽  
Vol 143-144 ◽  
pp. 353-357
Author(s):  
Ting Ting Li ◽  
Xing Liu ◽  
Rui Wang
Keyword(s):  
Temperature Profile ◽  
Shell Thickness ◽  
Urea Formaldehyde ◽  
Life Time ◽  
Self Healing ◽  
Time Service ◽  
Healing Efficiency ◽  
Performance Surface ◽  
The Relationship

Healing agents significantly affect the efficiency of healing microcracks, which produced from life-time service in composites. And microencapsulating 5-ethylidene-2-norbornene (ENB) with Melamine-Urea-Formaldehyde (MUF) shell possessing higher self-healing efficiency is sensitive to the manufacture temperature profile which is difficult to control but crucial to the microcapsule performance and thus the reproducibility. In this paper, we studied the relationship between heating curve (rate, steps and time) and microcapsule performance (surface morphology, thermal stability and shell thickness). It shows that fast-slower heating stage produces the best quality of microcapsule with proper outer and inner surface which can endure 285°C, and the particle size is about 100m with 400-700nm shell thickness.

scholarly journals Synthesis of Polyurethane/Poly(urea-formaldehyde) Double-shelled Microcapsules for Self-healing Anticorrosion Coatings

2019 ◽  
Vol 38 (1) ◽  
pp. 45-52 ◽  
Author(s):  
Yan Song ◽  
Kai-Feng Chen ◽  
Jing-Jing Wang ◽  
Yuan Liu ◽  
Tao Qi ◽  
...  
Keyword(s):  
Urea Formaldehyde ◽  
Self Healing ◽  
Anticorrosion Coatings
Sign in / Sign up

Export Citation Format

Share Document