scholarly journals Noise reduction mechanisms of sawtooth and combed-sawtooth trailing-edge serrations

2018 ◽  
Vol 848 ◽  
pp. 560-591 ◽  
Author(s):  
F. Avallone ◽  
W. C. P. van der Velden ◽  
D. Ragni ◽  
D. Casalino
Keyword(s):  
Noise Reduction ◽  
Correlation Length ◽  
Surface Pressure ◽  
Pressure Fluctuations ◽  
Empty Space ◽  
Frequency Range ◽  
Noise Sources ◽  
Trailing Edge ◽  
Trailing Edge Serrations ◽  
The One

Trailing-edge serrations are add ons retrofitted to wind-turbine blades to mitigate turbulent boundary-layer trailing-edge noise. This manuscript studies the physical mechanisms behind the noise reduction by investigating the far-field noise and the hydrodynamic flow field. A conventional sawtooth and a combed-sawtooth trailing-edge serration are studied. Combed-sawtooth serrations are obtained by filling the empty space between the teeth with combs (i.e. solid filaments). Both serration geometries are retrofitted to a NACA 0018 aerofoil at zero degree angle of attack. Computations are carried out by solving the explicit, transient, compressible lattice Boltzmann equation, while the acoustic far field is obtained by means of the Ffowcs Williams and Hawkings analogy. The numerical results are validated against experiments. It is confirmed that the combed-sawtooth serrations reduce noise more than the conventional sawtooth ones for the low- and mid-frequency range. It is found that the presence of combs affects the intensity of the scattered noise but not the frequency range of noise reduction. For both configurations, the intensity of the surface pressure fluctuations decreases from the root to the tip, and noise sources are mainly located at the serrations root for the low- and mid-frequency range. The presence of the filaments generates a more uniform distribution of the noise sources along the edges with respect to the conventional serration. The installation of combs mitigates the interaction between the two sides of the aerofoil at the trailing edge and the generation of a turbulent wake in the empty space between teeth. As a result, the inward (i.e. from the serration edge to the centreline) and outward (i.e. from the serration centreline to the edge) flow motions, due to the presence of the teeth, are mitigated. It is found that the installation of serrations affects the surface pressure fluctuations integral parameters. Both the spanwise correlation length and convective velocity of the surface pressure fluctuations increase with respect to the baseline straight configuration. When both quantities are similar to the one obtained for the straight trailing edge, the effect of the slanted edge is negligible, thus corresponding to no noise reduction. It is concluded that the changes in sound radiation are mainly caused by destructive interference of the radiated sound waves for which a larger spanwise correlation length is beneficial. Finally, the difference between measurements and the literature is caused by an incorrect modelling of the spanwise correlation length, which shows a different decay rate with respect to the one obtained for a straight trailing edge.

Experimental Study on the Turbomachinery Trailing Edge Noise Reduction

2016 ◽  
Author(s):  
Fan Tong ◽  
Wei-Yang Qiao ◽  
Liang Ji ◽  
Kun-Bo Xu ◽  
Xun-Nian Wang
Keyword(s):  
Noise Reduction ◽  
Wide Frequency Range ◽  
Broadband Noise ◽  
Special Focus ◽  
Turbine Cascade ◽  
Frequency Range ◽  
Trailing Edge ◽  
Trailing Edge Noise ◽  
Reduction Effect ◽  
Trailing Edge Serrations

This paper is a continuation of a series of study on the mechanism of the broadband noise reduction for turbomachinery blade using trailing edge serrations. The noise reduction potential of turbine blade with trailing edge serrations is experimentally assessed as well as the various parameters on the noise reduction effect. Special focus is put on whether the trailing edge serrations affect turbine cascade tailing edge noise in the same way as they do on the isolated airfoil. Five different trailing edge serrations were designed for a turbine linear cascade to investigate the effects of serration geometry parameter on the noise reduction. A linear microphone array was used to quantify the difference of sound source levels of turbine cascade with and without trailing edge modifications. The experiment was carried out at various velocities and the Reynolds number (based on cascade inlet velocity and chord) ranges from 1.3×105 to 3.3×105. The experiment results show that trailing edge serrations can reduce turbine trailing edge noise in a wide frequency range that we are interested (from 1600Hz to 10000Hz) and a maximum noise reduction of about 5dB is obtained in the mid frequency range (2000Hz to 4000Hz). The results show that the serration length has an important effect on the noise reduction effect and the longer serration in the experiment lead to more noise reduction. However, serration wavelength has only a little effect on the noise reduction although the wider trailing edge serrations tested in the experiment can achieve slightly more noise reduction. This is quite different from that for airfoils. At all the velocities tested, the cascade trailing edge noise is effectively reduced and the maximum noise reduction occurs at St=2fh/U≈1.

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

2021 ◽  
pp. 095441002098822
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Lei Wang ◽  
Fujia Hu ◽  
Guang Xi
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Numerical Study ◽  
Barn Owl ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Trailing Edge ◽  
Reduction Mechanisms ◽  
Trailing Edge Serrations ◽  
Bionic Airfoil

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

Trailing-edge noise reduction of a wing by a surface modification

2021 ◽  
Vol 263 (3) ◽  
pp. 3194-3201
Author(s):  
Varun Bharadwaj Ananthan ◽  
R.A.D. Akkermans ◽  
Dragan Kozulovic
Keyword(s):  
Noise Reduction ◽  
Stochastic Approach ◽  
Slight Reduction ◽  
Noise Sources ◽  
Trailing Edge ◽  
Sound Sources ◽  
Airframe Noise ◽  
Trailing Edge Noise ◽  
Random Particle ◽  
Noise Production

There is an increased emphasis on reducing airframe noise in the last decades. Airframe noise is sound generated by the interaction of a turbulent flow with the aircraft geometry, and significantly contributes to the overall noise production during the landing phase. One examples of airframe noise is the noise generated at a wing's trailing edge, i.e., trailing-edge noise. In this contribution, we numerically explore the local application of riblets for the purpose of trailing-edge noise reduction. Two configurations are studied: i) a clean NACA0012 wing section as a reference, and ii) the same configuration with riblets installed at the wing's aft part. The numerical investigation follows a hybrid computational aeroacoustics approach, where the time-average flow is studied by means of RANS. Noise sources are generated by means of a stochastic approach called Fast Random Particle Mesh method. The results show a deceleration of the flow behind the riblets. Furthermore, the turbulent kinetic energy indicates increased unsteadiness behind the riblets which is shifted away from the wall due to the presence of the riblets. Lastly, the sound sources are investigated by means of the 3D Lamb-vector, which indicates a slight reduction in magnitude near the trailing edge.

Experimental study of wavy trailing edge serrations on flat rotor blades

2021 ◽  
Vol 263 (5) ◽  
pp. 1855-1866
Author(s):  
Sai Manikanta Kaja ◽  
K. Sriinivasan ◽  
A. Jaswanth Kalyan Kumar
Keyword(s):  
Experimental Study ◽  
Noise Reduction ◽  
Pitch Angle ◽  
Acoustic Emissions ◽  
Broadband Noise ◽  
Rotor Blades ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Low Speeds ◽  
Trailing Edge Serrations

A detailed experimental study is conducted to observe the effect of various parameters like wavelength, depth of serrations, and pitch angle on serrated blades' acoustic emissions at low speeds up to 2000 rpm. Experiments are conducted on flat blade rotors with sinusoidal serrations on the trailing edge of blades with different amplitudes and wavelengths. A total of 7 blades with different serration configurations, including a base configuration, are studied, five of them have serrations throughout the span of the blade, and one configuration has serration of varying amplitude on the farther half of the blade. It is observed that some blade configurations have resulted in tonal noise reduction noise as much as 8dB, whereas some of the serration configurations reduce very little to none, there is no significant effect of T.E serrations on the broadband noise emitted by the rotor. Directivity of noise generated from the rotor, the effect of serrations on the directivity of the noise is studied.

Numerical Analysis of an Industrial Fan Fitted With Noise Reduction Devices

2006 ◽  
Author(s):  
J. Amaral Teixeira ◽  
E. Naylor ◽  
P. C. Ivey ◽  
A. G. Sheard ◽  
I. R. Kinghorn
Keyword(s):  
Numerical Analysis ◽  
Noise Reduction ◽  
Flow Characteristics ◽  
Pressure Rise ◽  
Broadband Noise ◽  
Noise Sources ◽  
Fan Noise ◽  
Trailing Edge ◽  
Low Speed ◽  
The Individual

The reduction of noise emitted by industrial low speed cooling fans, particularly those fitted to air conditioning systems is a concern to fan manufacturers. The market for industrial low speed fans is highly competitive, with fan noise being the major differentiating factor between competing products. Noise reduction strategies are therefore implemented but these can adversely affect the fan’s pressure delivery capability. A reduction of fan speed can also lead to a reduction in fan noise but this is usually accompanied by a corresponding reduction in pressure rise and flow rate. The practical difficulties associated with maintaining fan pressure and flow characteristics while simultaneously reducing fan noise present fan manufacturers with a challenge. Traditional empirical approaches to the reduction of fan noise have almost been exhausted and no longer offer the potential to significantly reduce fan noise. The understanding of the aerodynamic mechanisms that act as broadband noise sources in low speed fans has been the subject of a considerable number of papers over many years. For most fans operating as a single blade row, the main sources of noise, other than those dependent on the incident turbulence levels, depend on the trailing edge and tip gap flow conditions. A range of strategies seeking to control the noise generated by these regions have been proposed over time by various authors and a number of these schemes have reached production status. The current paper details the numerical analysis of an industrial low speed fan, commonly used in conjunction with a cooling matrix, and which incorporates two distinct noise reduction features; trailing edge crenulations and a blade tip fence. Comparisons are carried out between various combinations of blades, with and without the individual features, and a discussion of the aerodynamics of the particular configurations is undertaken from a perspective of their noise reduction capabilities.

Sign in / Sign up

Export Citation Format

Share Document