scholarly journals Superhydrophobic turbulent drag reduction as a function of surface grating parameters

2014 ◽  
Vol 747 ◽  
pp. 722-734 ◽  
Author(s):  
Hyungmin Park ◽  
Guangyi Sun ◽  
Chang-Jin “CJ” Kim
Keyword(s):  
Boundary Layer ◽  
Drag Reduction ◽  
Turbulent Flows ◽  
Smooth Surface ◽  
Continuous Monitoring ◽  
Laminar Flows ◽  
Turbulent Drag Reduction ◽  
Surface Grating ◽  
Turbulent Drag ◽  
Slip Flows

AbstractDespite the confirmation of slip flows and successful drag reduction (DR) in small-scaled laminar flows, the full impact of superhydrophobic (SHPo) DR remained questionable because of the sporadic and inconsistent experimental results in turbulent flows. Here we report a systematic set of bias-free reduction data obtained by measuring the skin-friction drags on a SHPo surface and a smooth surface at the same time and location in a turbulent boundary layer (TBL) flow. Each monolithic sample consists of a SHPo surface and a smooth surface suspended by flexure springs, all carved out from a $2.7 \times 2.7 {\mathrm{mm}}^{2}$ silicon chip by photolithographic microfabrication. The flow tests allow continuous monitoring of the plastron on the SHPo surfaces, so that the DR data are genuine and consistent. A family of SHPo samples with precise profiles reveals the effects of grating parameters on turbulent DR, which was measured to be as much as ${\sim }75\, \%$.

scholarly journals Interpretation of the mechanism associated with turbulent drag reduction in terms of anisotropy invariants

2007 ◽  
Vol 577 ◽  
pp. 457-466 ◽  
Author(s):  
B. FROHNAPFEL ◽  
P. LAMMERS ◽  
J. JOVANOVIĆ ◽  
F. DURST
Keyword(s):  
Drag Reduction ◽  
Turbulent Flows ◽  
Viscous Sublayer ◽  
Direct Numerical Simulations ◽  
Wall Region ◽  
Turbulent Drag Reduction ◽  
High Anisotropy ◽  
Turbulent Drag ◽  
Reduction Mechanisms ◽  
Long Chain

A central goal of flow control is to minimize the energy consumption in turbulent flows and nowadays the best results in terms of drag reduction are obtained with the addition of long-chain polymers. This has been found to be associated with increased anisotropy of turbulence in the near-wall region. Other drag reduction mechanisms are analysed in this respect and it is shown that close to the wall highly anisotropic states of turbulence are commonly found. These findings are supported by results of direct numerical simulations which display high drag reduction effects of over 30% when only a few points inside the viscous sublayer are forced towards high anisotropy.

Bubbly Turbulent Drag Reduction Is a Boundary Layer Effect

2007 ◽  
Vol 98 (8) ◽  
Author(s):  
Thomas H. van den Berg ◽  
Dennis P. M. van Gils ◽  
Daniel P. Lathrop ◽  
Detlef Lohse
Keyword(s):  
Boundary Layer ◽  
Drag Reduction ◽  
Turbulent Drag Reduction ◽  
Boundary Layer Effect ◽  
Turbulent Drag ◽  
Layer Effect

scholarly journals Polymers and Plastrons in Parallel Yield Enhanced Turbulent Drag Reduction

Fluids ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 197 ◽  
Author(s):  
Anoop Rajappan ◽  
Gareth H. McKinley
Keyword(s):  
Drag Reduction ◽  
Couette Flow ◽  
Turbulent Flows ◽  
Polymer Additives ◽  
Frictional Drag ◽  
Turbulent Drag Reduction ◽  
Turbulent Drag ◽  
Reduction Effect ◽  
Friction Measurements ◽  
Wall Bounded Turbulence

Despite polymer additives and superhydrophobic walls being well known as stand-alone methods for frictional drag reduction in turbulent flows, the possibility of employing them simultaneously in an additive fashion has remained essentially unexplored. Through experimental friction measurements in turbulent Taylor–Couette flow, we show that the two techniques may indeed be combined favorably to generate enhanced levels of frictional drag reduction in wall-bounded turbulence. We further propose an additive expression in Prandtl–von Kármán variables that enables us to quantitatively estimate the magnitude of this cooperative drag reduction effect for small concentrations of dissolved polymer.

Turbulent drag reduction in a closed flow system: Boundary layer versus bulk effects

1998 ◽  
Vol 10 (2) ◽  
pp. 426-436 ◽  
Author(s):  
Olivier Cadot ◽  
Daniel Bonn ◽  
Stéphane Douady
Keyword(s):  
Boundary Layer ◽  
Drag Reduction ◽  
Flow System ◽  
Layer Versus ◽  
System Boundary ◽  
Turbulent Drag Reduction ◽  
Turbulent Drag

Liquid-infused surfaces as a passive method of turbulent drag reduction

2017 ◽  
Vol 824 ◽  
pp. 688-700 ◽  
Author(s):  
M. K. Fu ◽  
I. Arenas ◽  
S. Leonardi ◽  
M. Hultmark
Keyword(s):  
Drag Reduction ◽  
Turbulent Flows ◽  
Experimental Studies ◽  
Turbulent Channel Flow ◽  
Superhydrophobic Surfaces ◽  
Fluid Interfaces ◽  
Turbulent Drag Reduction ◽  
Liquid Lubricant ◽  
Passive Method ◽  
Turbulent Drag

Liquid-infused surfaces present a novel, passive method of turbulent drag reduction. Inspired by the Nepenthes Pitcher Plant, liquid-infused surfaces utilize a lubricating fluid trapped within structured roughness to facilitate a slip at the effective surface. The conceptual idea is similar to that of superhydrophobic surfaces, which rely on a lubricating air layer, whereas liquid-infused surfaces use a preferentially wetting liquid lubricant to create localized fluid–fluid interfaces. Maintaining the presence of these slipping interfaces has been shown to be an effective method of passively reducing skin friction drag in turbulent flows. Given that liquid-infused surfaces have only recently been considered for drag reduction applications, there is no available framework to relate surface and lubricant characteristics to any resulting drag reduction. Here we use results from direct numerical simulations of turbulent channel flow over idealized, liquid-infused grooves to demonstrate that the drag reduction achieved using liquid-infused surfaces can be described using the framework established for superhydrophobic surfaces. These insights can be used to explain drag reduction results observed in experimental studies of lubricant-infused surfaces. We also demonstrate how a liquid-infused surface can reduce drag even when the viscosity of the lubricant exceeds that of the external fluid flow, which at first glance can seem counter-intuitive.

Sign in / Sign up

Export Citation Format

Share Document