scholarly journals Effect of emergency core cooling system flow reduction on channel temperature during recirculation phase of large break loss-of-coolant accident at Wolsong unit 1

2017 ◽  
Vol 49 (5) ◽  
pp. 979-988 ◽  
Author(s):  
Seon Oh Yu ◽  
Yong Jin Cho ◽  
Sung Joong Kim
Keyword(s):  
Cooling System ◽  
Flow Reduction ◽  
Loss Of Coolant Accident ◽  
Channel Temperature ◽  
Loss Of Coolant ◽  
System Flow ◽  
Core Cooling

scholarly journals PARAMETRIC STUDY OF LOCA IN TRIGA-2000 USING RELAP5/SCDAP CODE

2017 ◽  
Vol 19 (2) ◽  
pp. 59 ◽  
Author(s):  
Anhar Riza Antariksawan ◽  
Surip Widodo ◽  
Hendro Tjahjono
Keyword(s):  
Cooling System ◽  
Fuel Temperature ◽  
Blow Down ◽  
Beam Tube ◽  
Best Estimate ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling ◽  
Dry Out

A postulated loss of coolant accident (LOCA) shall be analyzed to assure the safety of a research reactor. The analysis of such accident could be performed using best estimate thermal-hydraulic codes, such as RELAP5. This study focuses on analysis of LOCA in TRIGA-2000 due to pipe and beam tube break. The objective is to understand the effect of break size and the actuating time of the emergency core cooling system (ECCS) on the accident consequences and to assess the safety of the reactor. The analysis is performed using RELAP/SCDAPSIM codes. Three different break size and actuating time were studied. The results confirmed that the larger break size, the faster coolant blow down. But, the siphon break holes could prevent the core from risk of dry out due to siphoning effect in case of pipe break. In case of beam tube rupture, the ECCS is able to delay the fuel temperature increased where the late actuation of the ECCS could delay longer. It could be concluded that the safety of the reactor is kept during LOCA throughout the duration time studied. However, to assure the integrity of the fuel for the long term, the cooling system after ECCS last should be considered.  Keywords: safety analysis, LOCA, TRIGA, RELAP5 STUDI PARAMETRIK LOCA DI TRIGA-2000 MENGGUNAKAN RELAP5/SCDAP. Kecelakaan kehilangan air pendingin (LOCA) harus dianalisis untuk menjamin keselamatan suatu reaktor riset. Analisis LOCA dapat dilakukan menggunakan perhitungan best-estimate seperti RELAP5. Penelitian ini menekankan pada analisis LOCA di TRIGA-2000 akibat pecahnya pipa dan tabung berkas. Tujuan penelitian adalah memahami efek ukuran kebocoran dan waktu aktuasi sistem pendingin teras darurat (ECCS) pada sekuensi kejadian dan mengkaji keselamatan reaktor. Analisis dilakukan menggunakan program perhitungan RELAP/SCDAPSIM. Tiga ukuran kebocoran dan waktu aktuasi ECCS berbeda dipilih sebagai parameter dalam studi ini.  Hasil perhitungan mengonfirmasi bahwa semakin besar ukuran kebocoran, semakin cepat pengosongan tangki reaktor. Lubang siphon breaker dapat mencegah air terkuras dalam hal kebocoran pada pipa. Sedang dalam hal kebocoran pada beam tube, ECCS mampu memperlambat kenaikan temperatur bahan bakar. Dari studi ini dapat disimpulkan bahwa keselamatan reaktor dapat terjaga pada kejadian LOCA, namun pendinginan jangka panjang perlu dipertimbangkan untuk menjaga integritas bahan bakar.Kata kunci: analisis keselamatan, LOCA, TRIGA, RELAP5

scholarly journals Thermal Hydraulic Analysis of a Nuclear Reactor due to Loss of Coolant Accident with and without Emergency Core Cooling System

2020 ◽  
Vol 01 (02) ◽  
pp. 53-60
Author(s):  
Pronob Deb Nath ◽  
Kazi Mostafijur Rahman ◽  
Md. Abdullah Al Bari
Keyword(s):  
Nuclear Reactor ◽  
Cooling System ◽  
Computational Study ◽  
Reactor Core ◽  
Primary Circuit ◽  
Feed Water ◽  
Pressurized Water ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling

This paper evaluates the thermal hydraulic behavior of a pressurized water reactor (PWR) when subjected to the event of Loss of Coolant Accident (LOCA) in any channel surrounding the core. The accidental break in a nuclear reactor may occur to circulation pipe in the main coolant system in a form of small fracture or equivalent double-ended rupture of largest pipe connected to primary circuit line resulting potential threat to other systems, causing pressure difference between internal parts, unwanted core shut down, explosion and radioactivity release into environment. In this computational study, LOCA for generation III+ VVER-1200 reactor has been carried out for arbitrary break at cold leg section with and without Emergency Core Cooling System (ECCS). PCTRAN, a thermal hydraulic model-based software developed using real data and computational approach incorporating reactor physics and control system was employed in this study. The software enables to test the consequences related to reactor core operations by monitoring different operating variables in the system control bar. Two types of analysis were performed -500% area break at cold leg pipe due to small break LOCA caused by malfunction of the system with and without availability of ECCS. Thermal hydraulic parameters like, coolant dynamics, heat transfer, reactor pressure, critical heat flux, temperature distribution in different sections of reactor core have also been investigated in the simulation. The flow in the reactor cooling system, steam generators steam with feed-water flow, coolant steam flow through leak level of water in different section, power distribution in core and turbine were plotted to analyze their behavior during the operations. The simulation showed that, LOCA with unavailability of Emergency Core Cooling System (ECCS) resulted in core meltdown and release of radioactivity after a specific time.

Recapturing Net Positive Suction Head Margins in Boiling Water Reactor Emergency Core Cooling Systems

2017 ◽  
Author(s):  
Alan J. Bilanin ◽  
Andrew E. Kaufman ◽  
Warren J. Bilanin
Keyword(s):  
Cooling System ◽  
Cooling Water ◽  
Boiling Water ◽  
Boiling Water Reactor ◽  
Cooling Systems ◽  
Water Reactor ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling ◽  
Reactor Pressure

Boiling Water Reactor pressure suppression pools have stringent housekeeping requirements, as well as restrictions on amounts and types of insulation and debris that can be present in the containment, to guarantee that suction strainers that allow cooling water to be supplied to the reactor during a Loss of Coolant Accident remain operational. By introducing “good debris” into the cooling water, many of these requirements/restrictions can be relaxed without sacrificing operational readiness of the cooling system.

scholarly journals The sensitivity analysis for APR1400 nodalization under Large Break LOCA condition based on mars code

2017 ◽  
Vol 32 (1) ◽  
pp. 10-17
Author(s):  
Hyung-Wook Jang ◽  
Sang-Yong Lee ◽  
Seung-Jong Oh ◽  
Woong-Bae Kim
Keyword(s):  
Power Reactor ◽  
Cooling System ◽  
Cross Flow ◽  
Accident Analysis ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Flow Phenomena ◽  
Long Time ◽  
Core Cooling ◽  
D Model

The phenomena of loss of coolant accident have been investigated for long time and the result of experiment shows that the flow condition in the downcomer during the end-of-blowdown were highly multi-dimensional at full-scale. However, the downcomer nodalization of input deck for large break loss of coolant accident used in advanced power reactor 1400 analyses are made up with 1-D model and improperly designed to describe realistic coolant phenomena during loss of coolant accident analysis. In this paper, the authors modified the nodalization of MARS code LBLOCA input deck and performed LBLOCA analysis with new input deck. From original LBLOCA input deck file, the nodalization of downcomer and junction connections with 4 cold legs and direct vessel injection lines are modified for reflecting the realistic cross-flow effect and real downcomer structure. The analysis results show that the peak cladding temperature of new input deck decreases more rapidly than previous result and that the drop of peak cladding temperature was advanced by application of momentum flux term in cross-flow. Additionally, the authors developed a new input deck with multi-dimensional downcomer model and ran MARS code with multi-dimensional input deck as well. By using the modified input deck, the Emergency core cooling system by-pass flow phenomena is better characterized and found to be consistent with both experimental report and regulatory guide.

Test and Evaluation of a Filtering System for Retention of Fibres in a Coolant Flow After Loss-of-Coolant Accident

2012 ◽  
Author(s):  
T. Gocht ◽  
W. Kästner ◽  
A. Kratzsch ◽  
M. Strasser
Keyword(s):  
Cooling System ◽  
Reactor Core ◽  
Heat Removal ◽  
Test Facility ◽  
Experimental Investigations ◽  
Time Interval ◽  
Insulation Material ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling

In case of an accident the safe heat removal from the reactor core with the installed emergency core cooling system (ECCS) is one of the main features in reactor safety. During a loss-of-coolant accident (LOCA) the release of insulation material fragments in the reactor containment can lead to malfunctions of ECCS. Therefore, the retention of particles by strainers or filtering systems in the ECCS is one of the major tasks. The aim of the presented experimental investigations was the evaluation of a filtering system for the retention of fiber-shaped particles in a fluid flow. The filtering system consists of a filter case with a special lamellar filter unit. The tests were carried out at a test facility with filtering units of different mesh sizes. Insulation material (mineral rock wool) was fragmented to fiber-shaped particles. To simulate the distribution of particle concentration at real plants with large volumes the material was divided into single portions and introduced into the loop with a defined time interval. Material was transported to the filter by the fluid and agglomerated there. The assessment of functionality of the filtering system was made by differential pressure between inlet and outlet of the filtering system and by mass of penetrated particles. It can be concluded that for the tested filtering system no penetration of insulation particles occurred.

Seismic Considerations for the Transition Break Size: An Overview of the Methodology

2006 ◽  
Author(s):  
G. Wilkowski ◽  
H. Xu ◽  
P. Krishnaswamy ◽  
N. Chokshi ◽  
S. Shaukat ◽  
...  
Keyword(s):  
Cooling System ◽  
Nuclear Regulatory Commission ◽  
Federal Regulations ◽  
Regulatory Requirements ◽  
Technical Requirements ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Primary Focus ◽  
Core Cooling ◽  
Regulatory Commission

This paper describes the results of a study, sponsored by the U.S. Nuclear Regulatory Commission (NRC), to assess potential seismic effects on the postulated transition break size (TBS) in the proposed risk-informed revision of the regulatory requirements for the emergency core cooling system (ECCS) contained in Title 10, Section 50.46, of the Code of Federal Regulations (10 CFR 50.46). The full report was provided on the NRC web site in mid-December 2005. The primary focus of this paper is to provide a summary of the study’s approach and results which was conducted to facilitate review and comment concerning the proposed rule and statement of considerations (SOC), entitled “Risk-Informed Changes to Loss-of-Coolant Accident Technical Requirements; Proposed Rule,” which the NRC published in the Federal Register (70 FR 67598) on November 7, 2005.

Sensitivity Analysis of a PWR Response During a Loss of Coolant Accident Under a Hypothetical Core Blockage Scenario Using RELAP5-3D

2014 ◽  
Author(s):  
Timothy Crook ◽  
Rodolfo Vaghetto ◽  
Alessandro Vanni ◽  
Yassin A. Hassan
Keyword(s):  
Cooling System ◽  
Safety Concern ◽  
System Response ◽  
Flow Paths ◽  
Pressurized Water ◽  
The Core ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Pass Through ◽  
Core Cooling

During a Loss of Coolant Accident (LOCA) a substantial amount of debris may be generated in containment during the blowdown phase. This debris can become a major safety concern since it can potentially impact the Emergency Core Cooling System (ECCS). Debris, produced by the LOCA break flow and transported to the sump, could pass through the filtering systems (debris bed and sump strainer) in the long term cooling phase. If the debris were to sufficiently accumulate at the core inlet region, the core flow could theoretically decrease, affecting the core coolability. Under such conditions, the removal of decay heat would only be possible by coolant flow reaching the core through alternative flow paths, such as the core bypass (baffle). There are certain plant specific features that can play a major role in core cooling from this bypass flow. One of these of key interest is the pressure relief holes. A typical 4-loop Pressurized Water Reactor (PWR) was modeled using RELAP5-3D to simulate the reactor system response during the phases of a large break LOCA and the effectiveness of core cooling under full core blockage was analyzed. The simulation results showed that the presence of alternative flow paths may significantly increase core coolability and prevent cladding temperatures from reaching safety limits, while the lack of LOCA holes may lead to a conservative over-prediction of the cladding temperature.

Sign in / Sign up

Export Citation Format

Share Document