scholarly journals Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites

2019 ◽  
Vol 226 ◽  
pp. 111308 ◽  
Author(s):  
Syafiqah Nur Azrie Safri ◽  
Mohamed Thariq Hameed Sultan ◽  
Mohammad Jawaid ◽  
M.S. Abdul Majid
Keyword(s):  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Dynamic Mechanical ◽  
Compression After Impact

Low Velocity and Compression-After-Impact Response of Pin-Reinforced Sandwich Composites

1999 ◽  
Author(s):  
Uday K. Vaidya ◽  
Mohan V. Kamath ◽  
Mahesh V. Hosur ◽  
Anwarul Haque ◽  
Shaik Jeelani
Keyword(s):  
Impact Testing ◽  
Low Velocity Impact ◽  
Sandwich Composites ◽  
Low Velocity ◽  
Static Compression ◽  
Velocity Impact ◽  
Transverse Stiffness ◽  
Impact Studies ◽  
Compression After Impact ◽  
The Impact

Abstract In the current work, sandwich composite structures with innovative constructions referred to as Z-pins, or truss core pins are investigated, in conjunction with traditional honeycomb and foam core sandwich constructions, such that they exhibit enhanced transverse stiffness, high damage resistance and furthermore, damage tolerance to impact. While the investigations pertaining to low velocity impact have appeared recently in Vaidya et al. 1999, the current paper deals with compression-after-impact studies conducted to evaluate the residual properties of sandwich composites “with” and “without” reinforced foam cores. The resulting sandwich composites have been investigated for their low velocity (< 5 m/sec) impact loading response using instrumented impact testing at energy levels ranging from 5 J to 50 J impact energy. The transverse stiffness of the cores and their composites has also been evaluated through static compression studies. Compression-after-impact studies were then performed on the sandwich composites with traditional and pin-reinforcement cores. Supporting vibration studies have been conducted to assess the changes in stiffness of the samples as a result of the impact damage. The focus of this paper is on the compression-after-impact (CAI) response and vibration studies with accompanying discussion pertaining to the low velocity impact.

Low Velocity Impact on Fiber Reinforced Geocomposites

2016 ◽  
Vol 827 ◽  
pp. 145-148 ◽  
Author(s):  
Sneha Samal ◽  
David Reichmann ◽  
Iva Petrikova ◽  
Bohdana Marvalova
Keyword(s):  
Impact Damage ◽  
Acoustic Vibration ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Reinforced Composite ◽  
Before And After ◽  
Two Parameters ◽  
The Impact

Low velocity impact strength of the fabric reinforced geocomposite has investigated in this article. Various fabrics such as carbon and E-glass were considered for reinforcement in geopolymer matrix. The primary two parameters such as low velocity, impact damage modes are explained on the E-glass and carbon based fabric geocomposite. The onset mode of damage to failure mode is examined through C-scan analysis. The quality of the composite is observed using c-scan with acoustic vibration mode of sensor before and after impact test. Then the effect of fabric and matrix on the impact behaviour is discussed. Residual strength of the composite is measured to determine post impact behaviour. It has been observed that resistance properties of E-glass reinforced composite is better than carbon fabric reinforced composite.

Sign in / Sign up

Export Citation Format

Share Document